Rockford Fosgate X317MAX-RSS1,000 Watt Can-Am X3 MAX Rear Subwoofer Solution (Gen-3)
Rear subwoofer solution purpose-built for the Can-Am® MAVERICK X3 MAX (4-seat). The kit pairs two 10" loaded subwoofer enclosures with a next‑generation, IPX6 Element Ready™ 1,000W amplifier for upgraded off‑road bass.
Highlights
- Roto-mold design for lightweight and durable seamless construction
- 2-Year Warranty
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- Bass upgrade for select Can-Am stage kits
Key specs
Full specs- Woofer Quantity
- 2
- Woofer Size
- 10"
- Woofer Series
- M2D2-10IB
- Nominal Impedance (ea)
- 2Ω (4Ω each enclosure wired in parallel to create a 2Ω amp load)
- Frequency Response
- 20 Hz – 750 Hz
- Sensitivity
- 90.3 dB
- Power Handling (Watts RMS)
- 500 Watts RMS 1,000 Watts Peak
- Crossover Type
- Infrasonic: 30 Hz @ 12dB/Octave
Key specs
Full specs- Woofer Quantity
- 2
- Woofer Size
- 10"
- Woofer Series
- M2D2-10IB
- Nominal Impedance (ea)
- 2Ω (4Ω each enclosure wired in parallel to create a 2Ω amp load)
Highlights
Overview- Roto-mold design for lightweight and durable seamless construction
- 2-Year Warranty
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
Overview
Rear subwoofer solution purpose-built for the Can-Am® MAVERICK X3 MAX (4-seat). The kit pairs two 10" loaded subwoofer enclosures with a next‑generation, IPX6 Element Ready™ 1,000W amplifier for upgraded off‑road bass.
Best for
- Owners of Can‑Am MAVERICK X3 MAX 4‑seat models seeking stronger low-frequency performance
- Riders who want a purpose-built, weather‑resistant subwoofer solution for off‑road use
- People who prefer a factory‑style, plug‑and‑play audio upgrade
Key points
- 1,000 watts total output from a next‑generation IPX6 Element Ready™ amplifier
- Two Element Ready™ 10" loaded subwoofer enclosures for increased bass
- Element Ready™ design resists water, dirt, mud and UV exposure
- Plug‑and‑play design: no drilling or cutting required for installation
- Rockford Factory Fit & Finish (RF3) engineered to match factory aesthetics
- Designed as an upgrade for select Rockford Fosgate Can‑Am Stage‑3/4/5/6 systems
Fit and use
Designed specifically for select Can‑Am MAVERICK X3 MAX models and fits 4‑seat configurations only (not 2‑seat). The kit is intended as a direct, plug‑and‑play upgrade to compatible Rockford Fosgate systems; verify vehicle and system compatibility before purchase.
What to know
Verify the COMPATIBILITY chart and your system requirements before buying. This kit is purpose‑built for select aftermarket Rockford Fosgate Can‑Am systems and fits 4‑seat X3 MAX models only. Element Ready™ products are built to withstand environmental exposure, but confirm fitment and compatibility for your vehicle a…
Key features
- Roto-mold design for lightweight and durable seamless construction
- 2-Year Warranty
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- Bass upgrade for select Can-Am stage kits
- Uses factory mounting locations for easy install
- Vehicle specific wiring harness and mounting plate for amplifier
- Down firing configuration for improved performance
- Custom fit left and right sealed subwoofer enclosures
- Enclosure textured to match factory finish
- M5-1000X1: 1,000-watt mono IPX6 Element Ready™ amplifier
- M2 10” IPX6 Element Ready™ loaded subwoofers in enclosures under rear seats
- Maximum Bass Performance
More info
Manufacturer details
Purpose built exclusively for the Can-Am® MAVERICK X3 MAX, this rear subwoofer kit provides next level bass performance, an Element Ready™ design, and simple installation.
Maximum Bass Performance: With 1,000 watts of output, the Element Ready™ amplifier and dual subwoofers deliver that next level of off-road bass performance
Element Ready™: Purpose built for the off-road environment, Rockford’s Element ReadyTM products are built to stand up to water, dirt, mud and UV rays, making sure your speakers stand the test of time.
Plug-and-Play Design: No drilling, no cutting and designed to work right out of the box. Simple installation ensures less time in the garage and more time out riding.
RF3 (Rockford Factory Fit and Finish): Designed and engineered to match and compliment the factory fit and finish of your vehicle. These components are purpose built to the exact specifications to ensure the best-in-class fitment and look.
Compatibility Chart: Please review below tab for fitment before purchasing. Not compatible with Maverick R.
Additional details
MAX BASS PERFORMANCE
Purpose Built exclusively for select Can-Am® X3 MAX models, this dual rear subwoofer kit provides next level bass performance, an Element Ready™ design, and simple installation. The kit is designed as an upgrade for select aftermarket Rockford Fosgate Can-Am Stage-3/4/5/6 systems. It features two Element Ready™ 10" loaded subwoofer enclosures and 1,000 watt, next-generation IPX6 Element Ready™ amplifier. Includes all necessary wiring harnesses and hardware. Fits 4-seat models only, not 2-seat. See COMPATIBILITY chart to verify system requirements and fitment before purchasing.
Technologies

Maximum Bass Performance
With 1,000 watts of output, the Element Ready™ amplifier and dual subwoofers deliver that next level of off-road

Plug & Play
This product is designed for rapid installation using pre-configured wiring harnesses and quick connect terminals.

Rockford Factory Fit & Finish
Designed and engineered to compliment the factory fit and finish of your vehicle. These components are

Element Ready™ | Motorsports
All components are protected against harsh outdoor elements like Dust, UV, Temperature, Water, Corrosion &
Specs
Specifications
| Woofer Quantity | 2 |
| Woofer Size | 10" |
| Woofer Series | M2D2-10IB |
| Nominal Impedance (ea) | 2Ω (4Ω each enclosure wired in parallel to create a 2Ω amp load) |
| Frequency Response | 20 Hz – 750 Hz |
| Sensitivity | 90.3 dB |
| Power Handling (Watts RMS) | 500 Watts RMS 1,000 Watts Peak |
| Crossover Type | Infrasonic: 30 Hz @ 12dB/Octave |
| Enclosure Type | Sealed |
| Enclosure Material | Roto-molded HDPE |
| Speaker Connector | 2-pin Deutsch™/Amphenol™ |
| In The Box | (1) M5-1000X1 amplifier (2) 10" pre-loaded subwoofer enclosures (4) Enclosure mounting brackets (4) Spacer washers (12) Bracket and enclosure mounting screws (4) Amp mounting screws (1) Amp plate mounting push clip (1) Amp Bracket (6) Zip ties (1) Enclosure speaker harness (1) Amp power and input signal harness |
| DimensionsBox (H x W x D)Wedge (H x W x D1 x D2) | 19.97” x 18.82” x 8.06” (each enclosure)(608 cm x 573 cm x 245 cm) |
| Shipping Weight | 50 Lbs (22.67 Kg) |
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Compatibility
| YEAR | GENERATION | MODEL | DESCRIPTION |
|---|---|---|---|
| 2021—current | Gen-3 | X317-STG3 | PMX-2, 800 Watt, Front Color Optix™ Speaker and Subwoofer Kit for Select X3 Models |
| 2021—current | Gen-3 | X317-STG4 | PMX-2, 800 Watt, Front Color Optix™ Speaker, Subwoofer & Rear Speaker Kit for Select X3 Models |
| 2021—current | Gen-3 | X317-STG5 | PMX-3, 1500 Watt, Front Color Optix™ Speaker, Dual Subwoofer and Rear Speaker Kit for Select X3 Models |
| 2021—current | Gen-3 | X317-STG6 | PMX-3, 1500 Watt, Front Color Optix™ Speaker, Dual Subwoofer and Rear Horn Speaker Kit for Select X3 Models |
| 2019—2020 | Gen-2 | X317-STAGE3 | 400 watt stereo, front speaker, and subwoofer kit for 2017+ Maverick X3 models |
| 2019—2020 | Gen-2 | X317-STAGE4 | 400 watt stereo, front speaker, subwoofer, & rear speaker kit for 2017+ Maverick X3 models |
| 2019—2020 | Gen-2 | X317-STAGE5 | 1000 watt stereo, front speaker, subwoofer, & rear speaker kit for 2017+ Maverick X3 |
| 2017—2018 | Gen-1 | X3-STAGE3 | 400 watt stereo, front speaker, and subwoofer kit for 2017-2018 Maverick X3 models |
| 2017—2018 | Gen-1 | X3-STAGE4 | 400 watt stereo, front speaker, subwoofer, & rear speaker kit for 2017-2018 Maverick X3 models |
| 2017—2018 | Gen-1 | X3-STAGE5 | 1000 watt stereo, front speaker, subwoofer, & rear speaker kit for 2017-2018 Maverick X3 models |
YESModel IS compatible with kit |
NOModel NOT compatible with kit |
NOT AVAILABLEModel not produced this year |
|---|
| MAX MODELS | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|---|---|---|
| Maverick X3 MAX Turbo [64] | — | ✅ | ✅ | ✅ | — | — | — | — | — |
| Maverick X3 MAX Turbo R [64] | ✅ | ✅ | ✅ | — | — | — | — | — | — |
| Maverick X3 MAX ds Turbo [64] | — | — | — | — | ✅ | ✅ | ✅ | ✅ | ✅ |
| Maverick X3 MAX ds Turbo R [64] | — | — | — | ✅ | ✅ | — | — | — | — |
| Maverick X3 MAX ds Turbo RR [64] | — | — | — | — | — | ✅ | ✅ | ✅ | ✅ |
| Maverick X3 MAX rs Turbo [72] | — | — | — | — | — | — | — | ✅ | ✅ |
| Maverick X3 MAX rs Turbo R [72] | — | — | — | ✅ | ✅ | — | — | — | — |
| Maverick X3 MAX rs Tubro RR [72] | — | — | — | — | — | ✅ | ✅ | ✅ | ✅ |
YESMAVERICK X3 MAX4-Seat Model |
NOMAVERICK X32-Seat Model |
YESOEMBucket Seats |
NOAftermarketBench Seats |
|---|
| MAX X MODELS | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|---|---|---|
| Maverick X3 MAX X ds Turbo R [64] | ✅ | ✅ | ✅ 3 | — | — | — | — | — | — |
| Maverick X3 MAX X ds Turbo RR [64] | — | — | — | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ |
| Maverick X3 MAX X ds Turbo RR Smart-Shox [64] | — | — | — | — | — | — | — | — | ✅ |
| Maverick X3 MAX X rc Turbo RR [72] 2 | — | — | — | — | — | — | — | X 2 | X 2 |
| Maverick X3 MAX X mr Turbo RR [72] 1 | — | — | — | ✅ 1 | ✅ 1 | ✅ 1 | ✅ 1 | ✅ 1 | ✅ 1 |
| Maverick X3 MAX X rs Turbo R [72] | ✅ | ✅ | ✅ 3 | — | — | — | — | — | — |
| Maverick X3 MAX X rs Turbo RR [72] | — | — | — | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ |
| Maverick X3 MAX X rs Turbo RR Smart-Shox [72] | — | — | — | — | ✅ | ✅ | ✅ | ✅ | ✅ |
[] New Naming Convention — started in 2022 — featuring 64" and 72" width models. Older models denote [width] in name to clarify make/model/year progression.
1
Snorkel prevents stages with rear moto-cans from being installed inside roll-cage, must be installed outside roll-cage.
2
Intrusion Bar introduced in 2018, causes (FSE) front speaker clearance issue.
3
Smart-Lok™ introduced in 2018, requires 2nd (RFX317-FSE) or 3rd generation (X317-FSE) front speaker panels.
Videos
X317MAX-RSS | Installation
The installation tutorial covers the aftermarket Rockford Fosgate X317MAX-RSS rear subwoofer solution for select 2017+ Can-Am® MAVERICK X3 MAX models. Verify compatibility before purchase.
Similar products








