Accessories

Anyone with a Polaris factory Ride command head unit in their side-by-side who wants to add aftermarket speakers needs to check out the RCDRCA adapter by Memphis. This piece creates outputs from your factory Polaris Ride Command audio system allowing you to add additional amplifiers to expand your audio system while manitaining the factory Ride Command head unit.

Was $29.95

The CANAMX3AMPBK provides a secure mounting location for an amplifier in your CanAm X3. These brackets are designed for use with all X3 models and bolt to factory mounting locations. This single bracket accommodates a variety of Memphis product with specific mounting locations for MX400.4 and MX800.4 amplifiers as well as a mounting location for Memphis SMC2A hideaway radio unit.

Was $69.95

This updated amplifier bracket is designed for 2023 and newer Polaris Ranger XP 1000 and Ranger Crew XP 1000 models, across all trim levels. This bracket relocates the under-hood factory equipped RIDE COMMAND+ module, making way for easy installation of the amplifier. Built to optimize space under the hood while maintaining functionality and durability, this bracket is the must-have for 2023 and newer compatible models. Amplifier and RGB controller are not included as they come packaged with the RNGR18-STGx and RNGR18RC-STGx audio kits. Element Ready™: Purpose built for the off-road environment, Rockford’s Element Ready™ products are built to stand up to water, dirt, mud and UV rays, making sure all your audio components perform regardless of the conditions. Compatibility: Please review below chart for fitment before purchasing.

Audio interface designed for use with Polaris® vehicles equipped with Ride Command®. Allows Polaris® Ride Command® to function as your source unit. Uses Rockford Fosgate engineered circuitry to eliminate turn-on pop common with all Ride Command® units and noise in UTVs equipped with DYNAMIX suspension caused by switching between Firm, Sport, and Comfort modes. Compatible with all Polaris® RZR®, GENERAL™, and RANGER® models equipped with Ride Command®

Was $299.99

Amp kit mounting plate for select RANGER® models.

Was $429.99

Rear speaker harness for select YXZ® models.

Was $129.99

Punch Series

The PM-CL1B is a black marine grade cast aluminum wakeboard tower speaker clamp designed for use with the PM282W-B, PM282HW-B and the PM2652W-B

Was $209.99

The TLNAMPBK provides a secure mounting location for an amplifier in your Honda Talon. These brackets are designed for use with all Honda Talon models and bolt to factory mounting locations. This single bracket accommodates a variety of Memphis product with specific mounting locations for MX400.4 and MX800.4 amplifiers as well as a mounting location for Memphis SMC2A hideaway radio unit.

Was $69.95

2nd generation Ride Command adaptor harness for RZR Pro XP models with Ride Command. Allows users to connect additional audio accessories to their ride command system.

Was $89.95

The KRXKIT was designed for use in 2020-2022 Kawasaki Teryx KRX machines. This kit allows you to add speakers and amplifiers to your machine. The unit features an amp mounting plate that can accommodate several Memphis Audio products including: MX800.4 or MX400.4 amplifiers as well as an SMC2A hideaway radio. This speaker comes equipped with all the speaker connectors and wire harnesses allowing you to run speakers to locations in your Teryx. Speaker cut out templates are provided which makes it easy to cut locations for your speakers accurately. This kit allows for 4 speakers to be installed in your vehicle (MXA60L in the front, MXA62PS in the rear speakers sold separately). All wire harnesses and hardware required are included for the ultimate audio upgrade in your Kawasaki Teryx KRX.

Was $379.95

The KRXDK is a dash kit designed to fit in a 2020-2022 Kawasaki Teryx KRX dash to accommodate a Memphis SMC3 Radio (radio sold separately). This kit allows you to easily add a radio to your KRX in a factory location. The kit is made from brushed black aluminum which is strong and weather resistant. This comes with all screws and hardware required to mount your SMC3 radio in your 2020-2022 Kawasaki Teryx KRX. Use this dash kit and SMC3 in combination with the KRXKIT speaker installation kit (sold separately) to build the ultimate system in your vehicle.

Was $69.95

Replacement T bracket and swivel mount for "M" series and "PM" series standard sized enclosed speakers. Designed specifically for the PM-CL1 and PM-CL1B clamps. Sold as individual units. Hardware not included. See SPECIFICATIONS tab for compatibility chart.

Single replacement Element Ready™ grille for the 2018+ Polaris Ranger Stage 1 and 2017+ Can-Am Defender Stage 1 audio systems. Sold as individual units (not pairs). See COMPATIBILITY chart to verify fitment before purchasing.

Replacement pair of black clamps for M0 6.5” Element Ready™ moto-can speakers. See COMPATIBILITY chart to verify fitment before purchasing.

Single replacement black clamp for M0, M1, or M2 6.5” moto-can speakers. If both of your clamps are broken, you will need to buy 2 of these. See COMPATIBILITY chart to verify fitment before purchasing.

Replacement hole saw and grommets for RNGR18, Pro XP, Turbo R, and Pro R stage kits, subwoofer kit and Road King kits for Harley-Davidson®. See COMPATIBILITY chart to verify fitment before purchasing.

Replacement hardware accessory pack for compatible aftermarket Pro XP, Turbo R, and Pro R stage kits. See COMPATIBILITY chart to verify fitment before purchasing.

300W RMS • 4 Ohm

This single subwoofer is designed as a replacement only for existing Harley-Davidson and Can-Am subwoofer systems. This model is a derivative of the Marine M1D2-10B subwoofer that features all the marine grade protection, but without RGB illumination. It's designed for high performance bass output in small sealed enclosures and features a 2Ω dual voice coil, wired in series to create a 4Ω amplifier load. This item is sold as a single unit (not in pairs). Enclosure not included. Refer to our COMPATIBILITY chart to verify fitment before purchasing.

Replacement Ride Command Harness for RZR19PXP Kits. This all-in-one signal harness includes an active noise suppressor designed to eliminate turn-on/off pops while providing the same low level output as if a PMX source unit was installed.

Replacement main power harness for RZR19PXP and RZR19RCPXP stage kits. Provides power, ground, remote turn-on, signal routing, and speaker wires for STG4, STG5, and STG6 audio kits. Please refer to compatibility chart to verify fitment before purchasing.

Rear speaker harness adds rear moto-cans to select UTV audio kits. Requires RZR (RZR14), Can-Am (X317), or Ranger (RNGR18) amplifier installation kit. Refer to our COMPATIBILITY chart to verify fitment before purchasing. Please contact customer support for replacement parts for your audio kit.

Prime Series

Speaker enclosure for select Polaris® GENERAL models.

The RFGNRL-PMXDK dash kit is designed to add a Rockford Fosgate PMX-0, PMX-2 or PMX-3 digital marine source unit into select GENERAL™ models. This kit is custom molded to match the existing dash. Two insert panels are included in the kit; one for use with the PMX-0, and one for use the PMX-2 or PMX-3. All mounting hardware for the source unit and dash kit are provided.

Prime Series

Subwoofer enclosure for select Polaris® RANGER models.