1 / 6
Delivers very loud, deep and clear low-end when driven with adequate amplification — ideal for bass-first vehicle builds.
Buyer confidence
87%Highlights
- Proprietary high-flow, low-noise port
- Constructed with 5/8" MDF
- 1 Year Warranty
- High current binding posts
Key specs
Full specs- Nominal Impedance (ea)
- 1-Ohm Internally wired to create a 1-Ohm amplifier load
- Power Handling (Watts RMS)
- 800 Watts RMS 1600 Watts Max
- Enclosure Type
- Vented
- Enclosure Material
- 5/8" MDF (Medium Density Fiberboard)
- Woofer Quantity
- 2
- Woofer Size
- 12"
- Woofer Series
- Punch P2 (P2D4-12)
- Speaker Connector
- Up to 10 AWG compression terminals
Key specs
Full specs- Nominal Impedance (ea)
- 1-Ohm Internally wired to create a 1-Ohm amplifier load
- Power Handling (Watts RMS)
- 800 Watts RMS 1600 Watts Max
- Enclosure Type
- Vented
- Enclosure Material
- 5/8" MDF (Medium Density Fiberboard)
Highlights
Overview- Proprietary high-flow, low-noise port
- Constructed with 5/8" MDF
- 1 Year Warranty
Review highlights
Based on customer reviewsPunchy, earth‑shaking bass from a compact dual‑12 enclosure
Delivers very loud, deep and clear low-end when driven with adequate amplification — ideal for bass-first vehicle builds.
What buyers praise
- Very loud, pounding low-frequency output
- Deep, clear bass reproduction across low-to-mid bass
What to watch for
- Produces strong vibration—interior trim or mirrors may need securing
Overview
A factory-loaded dual 12" vented enclosure tuned for Punch P2 woofers, rated 800 W RMS when wired to a 1-Ohm load.
Best for
- Adding low-frequency output without building a custom enclosure
- Systems that need up to 800 W RMS power handling
- Applications where a vented dual-12 solution is preferred
Key points
- Dual 12" Punch P2 drivers in a vented (ported) loaded enclosure
- 800 Watts RMS total power handling when wired to a 1-Ohm load
- Constructed from 5/8" MDF and covered in high-density carpet
- Quick-release compression terminals for speaker connections
- Enclosure tuned by computer-aided design for consistent performance
- Verified technologies: Klippel Verified, CEA-2031
Fit and use
Delivered as a loaded (pre-populated) vented enclosure. The assembly is wired to present a 1-Ohm load to the amplifier; confirm vehicle space and orientation before purchase to ensure fit.
What to know
Rated for 800 W RMS when wired to a 1-Ohm load—ensure your amplifier and wiring are appropriate for that load and power level. The enclosure is built from 5/8" MDF and carpet-covered for a durable finish. Quick-release terminals simplify making connections. Measure available vehicle space and verify clearance before i…
Highlights
Key features
- Proprietary high-flow, low-noise port
- Constructed with 5/8" MDF
- 1 Year Warranty
- High current binding posts
- Klippel Verified
- CEA-2031
More info
Manufacturer details
The P2-2X12 is a dual P2 12” vented enclosure with 800 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.
Additional details
The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available seperately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P2 Loaded Enclosures feature similar tonal performance as P1 models, but with more power handling capacity.
Technologies
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has
Specs
Specifications
10
| Nominal Impedance (ea) | 1-Ohm Internally wired to create a 1-Ohm amplifier load |
| Power Handling (Watts RMS) | 800 Watts RMS 1600 Watts Max |
| Enclosure Type | Vented |
| Enclosure Material | 5/8" MDF (Medium Density Fiberboard) |
| Woofer Quantity | 2 |
| Woofer Size | 12" |
| Woofer Series | Punch P2 (P2D4-12) |
| Speaker Connector | Up to 10 AWG compression terminals |
| DimensionsBox (H x W x D)Wedge (H x W x D1 x D2) | 15.125" x 33.875" x 15.75" (38.4cm x 86cm x 40cm) |
| Shipping Weight | 77.35 Lbs. (35.08 kg) |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Similar products
Compare nearby options
Rockford Fosgate•Punch
P3-1X12 Punch Single P3 12" Loaded Enclosure
5.059 reviews
$649.99CAD
$769.99
In stock
Rockford Fosgate•Punch
P3-2X12 Punch Dual P3 12" Loaded Enclosure
$1099.99CAD
$1299.99
In stock
Rockford Fosgate•Punch
P2-1X12 Punch Single P2 12" Loaded Enclosure
$499.99CAD
$589.99
In stock
Rockford Fosgate•Punch
P3S-1X12 Punch Single P3S 12" Shallow Loaded Enclosure
4.76 reviews
$569.99CAD
$679.99
In stock
Rockford Fosgate•Power
T1S-1X12 Power Single 12” T1 Slim Sealed Loaded Enclosure
$1209.99CAD
$1429.99
Backorder
Rockford Fosgate•Power
T1S1-12 Power 12" T1 Slim Single 1-Ohm Subwoofer
5.07 reviews
$849.99CAD
$999.99
In stock