Enclosures

Punch Series • 300W RMS • 20 Ohm

The Punch P300-8P is an "all in one" solution for dropping Bass in any factory or aftermarket system. This model features an 8" high output woofer with a 300-watt internal amplifier in a slim design enclosure that's great for truck and small car applications. The enclosure features quick release input and power connectors for easy removal when extra space is required.

Was $529.99

Mille Series • 500W RMS • 2 Ohm

MPBX 300 S2 ultra-shallow sealed enclosure is specifically optimized to deliver all the MPS 300 S2 subwoofer performances. The enclosure structure features incomparable robustness thanks to 15 mm (0.59 in.) wood thickness. Internal sound-absorbing material virtually increases the box's volume and reduces acoustic resonances. Panel-to-panel internal bracing with solid corners minimizes resonances and round corners ease the placement. 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting, through supplied feet with Hook-and-loop inserts, to increase the low-frequency extension, and Up-Firing installation to obtain more punch and definition. SSP (Sub Smart Plug) features both Plug-&-Play terminal block and traditional push terminals providing bulletproof connection and quick release.

Was $1119.99

Punch Series • 500W RMS • 2 Ohm

The P1-2X12 is a dual P1 12” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Was $849.99

Mille Series • 500W RMS • 2 Ohm

MPBX 250 S2 ultra-shallow sealed enclosure is specifically optimized to deliver all the MPS 250 S2 subwoofer performances. The enclosure structure features incomparable robustness thanks to 15 mm (0.59 in.) wood thickness. Internal sound-absorbing material virtually increases the box's volume and reduces acoustic resonances. Panel-to-panel internal bracing with solid corners minimizes resonances and round corners ease the placement. 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting, through supplied feet with Hook-and-loop inserts, to increase the low-frequency extension, and Up-Firing installation to obtain more punch and definition. SSP (Sub Smart Plug) features both Plug-&-Play terminal block and traditional push terminals providing bulletproof connection and quick release.

Was $969.99

Prime Series • 500W RMS • 2 Ohm

More bass, powerful performance. The all-in-one R2 loaded enclosures feature powerful bass output, high quality construction, and easy drop-in installation.

Was $619.99

Punch Series • 1200W RMS • 1 Ohm

The P3-2X12 is a dual P3 12” vented enclosure with 1200 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Was $1299.99

Dieci Series • 220W RMS • 0.4 Ohm

High performance in a compact stylish design Watch the product video The DBA 201 active subwoofer box features a double passive radiator enclosure made with solid MDF and optimized with FEM simulation to ensure superior performance, maximizing the subwoofer output. The massive magnet of the 8-in. driver provides optimal control during the highest cone excursion. Extra full set of controls to fine-tune the in-car performance The built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping. Auto turn-on and standby mode The built-in audio sense circuit allows the DBA 201 to turn on and timeout to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available.

Was $539.99

Punch Series • 300W RMS • 20 Ohm

The Punch P300-12T is an "all in one" solution for dropping Bass in any factory or aftermarket system. This model features a 12" high output woofer with a 300-watt internal amplifier in a slim design enclosure that's great for universal truck applications. The enclosure features quick release input and power connectors for easy removal when extra space is required.

Was $709.99

Punch Series • 300W RMS

The P300-10 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 10” subwoofer in a sealed enclosure powered by an internal 300 watt amplifier.

Was $649.99

Dieci Series • 220W RMS • 0.4 Ohm

High performance in a super flat design Watch the product video The DBA 201 F flat active subwoofer enclosure optimized with FEM simulation ensures superior performance, maximizing the subwoofer output with a super flat size. The massive magnet of the 8 in. driver provides optimal control during the highest cone excursion. Extra full set of controls to fine-tune the in-car performance The built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 F to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 F and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping. Auto turn-on and standby mode The built-in audio sense circuit allows the DBA 201 F to turn on and timeout to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available.

Was $559.99

Punch Series • 400W RMS • 1 Ohm

The P2-1X12 is a single P2 12” vented enclosure with 400 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Was $589.99

Punch Series • 600W RMS • 1 Ohm

The P3-1X12 is a single P3 12” vented enclosure with 600 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Was $769.99

Punch Series • 300W RMS • 1 Ohm

The P3S-1X10 is a single 10” Punch Shallow subwoofer rated at 300 Watts RMS loaded in a sealed enclosure. This subwoofer enclosure is internally wired to a 1-Ohm load and features 5/8” MDF and 10 AWG quick-release input terminals.

Was $629.99

Punch Series • 500W RMS • 2 Ohm

The P1-2X10 is a dual P1 10” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Was $749.99

Punch Series • 400W RMS • 1 Ohm

The P3S-1X12 is a single 12” Punch Shallow subwoofer rated at 400 Watts RMS loaded in a sealed enclosure. This subwoofer enclosure is internally wired to a 1-Ohm load and features 5/8” MDF and 10 AWG quick-release input terminals.

Was $679.99

Prime Series • 200W RMS • 2 Ohm

The R2S-1X10 is a single 10” shallow enclosure with 200 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Was $389.99

180W RMS

The all-new NANOBOXX delivers powerful, under-seat bass in tight spaces—now built to handle even the harshest environments. With an IP66 rating, it’s fully protected against water, dust, and debris. Sealed connectors and a weather-resistant control panel make it perfect for Jeeps, powersports, and any adventure-ready setup. Whether you’re off-roading or cruising in the rain, NANOBOXX brings big bass without compromise. One listen is all it takes to hear why it’s the best slim bass solution out there.

Was $579.95

Punch Series • 250W RMS • 4 Ohm

The P1-1X10 is a single P1 10” vented enclosure with 250 Watts RMS power handling wired to a 4-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Was $449.99

1500W RMS

MOJO Pro Subwoofers are the ultimate powerhouse, delivering unrelenting old-school Memphis bass in a premium loaded enclosure. Featuring dual 12” subs in a front-ported design with a massive port, this enclosure unleashes earth-shaking sound that transforms any vehicle into a party on wheels. Wrapped in durable carpet and highlighted with bold Memphis custom embroidery, MOJO Pro enclosures combine legendary performance with eye-catching style.

Was $1349.95

300W RMS

Street Reference SRX12SA bass systems are an all-in-one bass package designed to easily bring big bass to any vehicle. This single 12″ enclosure features a sleek, modern front facade with integrated RGB LED lighting, giving the box a custom look at an unbeatable price. The SRX12SA is powered by an integrated 300-watt amplifier mounted directly into the enclosure, driving the 12″ SRX subwoofer to deliver impressive bass performance in a simple, hassle-free package. The system also includes an RGB switcher with 7 preset colors or the option to pair with an MXRRGBBTC LED controller, unlocking unlimited color possibilities for a fully personalized setup. Designed for maximum output, this enclosure features a large front vent for enhanced bass response and includes a convenient bass knob for easy control. The SRX12SA is the ultimate one-stop solution for anyone looking to add powerful, customizable bass to their vehicle.

Was $499.95

1400W RMS

This high performance truck enclosure was designed specifically to fit perfectly behind the seat in most single cab trucks. This is also an amazing solution to add big bass in a jeep or other vehicle that requires a thin profile enclosure. This ported dual 6.5″ MOJO Mini enclosure was designed for high output and performance.

Was $1009.95

Prime Series • 250W RMS • 2 Ohm

The R2S-1X12 is a single 12” shallow enclosure with 250 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Was $439.99

300W RMS

Power Reference Loaded Enclosures were designed to maximize the performance of your Power Reference subwoofers. Each box was engineered by our technicians at Memphis to the exact T/S parameters of Power Reference subwoofers. These pre-loaded enclosures feature a ported design, 2-tone carpet and an embroidered Memphis logo.

Was $609.95

1800W RMS

Bring the massive output of dual 8″ MOJO Mini subwoofers to your Ram crew cab truck. These direct fit OEM vehicle specific enclosures were designed to fit perfectly in all 2019 & newer Ram Crew Cab trucks (does not fit Mega or Classic Cab versions). This loaded enclosure is perfect for anyone looking for a vehicle specific box that is already loaded with subwoofers. No need for custom fabrication, these boxes fit perfectly and were tuned specifically for maximum performance in your Ram crew cab truck. Adding subwoofers to your Ram truck has never been easier with MOJO mini direct fit Ram enclosures.

Was $1739.95