1 / 6

Rockford Fosgate Punch P300-10Punch Single 10" 300 Watt Amplified Subwoofer

4.9379 reviewsSee all reviews

Delivers punchy low end and good value in a small all‑in‑one package that fits many vehicles; installation and the remote gain behavior can require extra attention for some factory systems.

Buyer confidence

98%

Highlights

  • 1 Year Warranty
  • Constructed with 5/8" MDF
  • Detachable Power/Ground connector
  • Proprietary high output woofer

Key specs

Full specs
Nominal Impedance (ea)
Crossover Controls
Variable 35Hz to 150Hz 12dB/Octave Butterworth
Power Handling (Watts RMS)
300 Watts RMS
Heat Sink Type
Extruded Aluminum
Power Wire Gauge
8 AWG
Integrated Amplifier
300 Watts RMS
Frequency Response
25 Hz to 200 Hz
Woofer Quantity
1

Key specs

Full specs
Nominal Impedance (ea)
Crossover Controls
Variable 35Hz to 150Hz 12dB/Octave Butterworth
Power Handling (Watts RMS)
300 Watts RMS
Heat Sink Type
Extruded Aluminum

Highlights

Overview
  • 1 Year Warranty
  • Constructed with 5/8" MDF
  • Detachable Power/Ground connector

Review highlights

Based on customer reviews

Compact 10" sub with surprisingly strong, car‑filling bass

Delivers punchy low end and good value in a small all‑in‑one package that fits many vehicles; installation and the remote gain behavior can require extra attention for some factory systems.

379 reviews4.9/5 averageUpdated Mar 14, 2026

What buyers praise

  • Punchy, vehicle‑filling bass from a compact 10" package
  • All‑in‑one powered design (driver, enclosure and amp) simplifies setup

What to watch for

  • Remote bass knob functions as the master gain and can override the amp’s onboard gain—tune with that in mind
Overview

The Rockford Fosgate P300-10 combines a 10" Punch subwoofer and a built-in 300 watt amplifier in a compact sealed enclosure for a space-saving, all-in-one bass solution.

Best for

  • Adding low-end to factory audio systems
  • Installations where space is limited (trunk or cargo area)
  • Buyers who want an integrated amp + subwoofer package

Key points

  • 10" Punch subwoofer in a custom sealed enclosure
  • Integrated 300 watt amplifier (internal to enclosure)
  • Durable exterior designed to resist scrapes and bumps
  • CEA-2031 and CEA-2006 compliant; Klippel Verified

Fit and use

The unit is a powered loaded enclosure that requires power, ground and an audio signal from the source to operate. It is intended as a self-contained bass solution rather than a separate amp and subwoofer pair.

What to know

This product is compliant with CEA-2031 and CEA-2006 standards and is Klippel Verified. Powered loaded enclosures can have specific turn-on and wiring considerations; consult the manufacturer's advisory and owner's manual for details before installation.

Highlights

Key features

  • 1 Year Warranty
  • Constructed with 5/8" MDF
  • Detachable Power/Ground connector
  • Proprietary high output woofer
  • Large AWG input terminals
  • Remote bass level control included
  • High-efficiency, low current design
  • Thermal and over/under voltage protection
  • Intelligent auto turn on/off function
  • Adjustable 12db/Octave low pass crossover
  • Built-in adjustable bass boost EQ
  • Separate low level and speaker level inputs
More info

Manufacturer details

The P300-10 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 10” subwoofer in a sealed enclosure powered by an internal 300 watt amplifier.

Additional details

If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.

Technologies
CEA-2031

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has

CEA-2006 Compliant

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your

Klippel Verified

Klippel Verified

To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be

Specs

Specifications

22
Nominal Impedance (ea)
Crossover ControlsVariable 35Hz to 150Hz 12dB/Octave Butterworth
Power Handling (Watts RMS)300 Watts RMS
Heat Sink TypeExtruded Aluminum
Power Wire Gauge8 AWG
Integrated Amplifier300 Watts RMS
Frequency Response25 Hz to 200 Hz
Woofer Quantity1
Enclosure TypeAmplified
Woofer Size10"
Woofer SeriesProprietary
Shipping Weight23.8 Lbs. (10.79 kg)
Speaker Connectorn/a
DimensionsBox (H x W x D)Wedge (H x W x D1 x D2)13.3 x 18 x D1 8.9 - D2 5.9 (in) 33.7 x 45.72 x D1 22.6 - D2 14.98 (cm)
Enclosure Material5/8" MDF (Medium Density Fiberboard)
Tone ControlsGain & Bass Boost
Signal InputLow-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs
Power Input ConnectorQuick Disconnect Replacement Part: 1130-59232-01
CoolingConvection
Visual IndicatorsPowerProtect
Remote ControlIncluded
Circuit Topology ClassClass-D
Reviews (0)

No average rating yet

0 reviews

No written reviews are live yet. Signed-in customers can submit one below.

Own this product?

Share installation notes, sound quality feedback, and fitment tips. Customer reviews are saved in the same database and go live after moderation.

Checking account status...

No written reviews are live for this item yet.

Support

Return Authorization

If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.



Popular Questions

No FAQs available

Accessories