1 / 8
Variants
Delivers tight, clean low-end from a shallow 10" package that fits limited spaces and offers strong performance for the price; a number of buyers reported early failures, so longevity appears variable.
Buyer confidence
82%Highlights
- 1 Year Warranty
- M-Roll Santoprene™ surround
- Anodized aluminum cone and dustcap
- Shallow Motor Assembly
Key specs
Full specs- Magnet Weight (kg) NOT USED
- 1.32 oz. (47 kg.)
- Sd (cm2)
- 333
- Nominal Impedance
- Dual 4-Ohm
- Speaker Connector
- Dual 10 AWG Compression
- Size
- 10"
- Magnet Weight (oz)
- 47 oz. (1.32 Kg)
- Voice Coil Diameter
- 2.5" (65.5 mm)
- SPL (dB @ 1w/1m)
- 83
Key specs
Full specs- Magnet Weight (kg) NOT USED
- 1.32 oz. (47 kg.)
- Sd (cm2)
- 333
- Nominal Impedance
- Dual 4-Ohm
- Speaker Connector
- Dual 10 AWG Compression
Highlights
Overview- 1 Year Warranty
- M-Roll Santoprene™ surround
- Anodized aluminum cone and dustcap
Review highlights
Based on customer reviewsRockford Fosgate Punch 10" P3S Shallow 4-Ohm DVC Subwoofer — shallow, punchy bass with good value but some reliability reports
Delivers tight, clean low-end from a shallow 10" package that fits limited spaces and offers strong performance for the price; a number of buyers reported early failures, so longevity appears variable.
What buyers praise
- Shallow design fits tight spaces (under-seat and many OEM enclosures)
- Tight, punchy, and clean bass—works especially well in sealed boxes
What to watch for
- May need minor enclosure tweaks for secure mounting (longer screws, foam strips, or small notches)
Overview
The Rockford Fosgate Punch P3S 10" shallow-mount subwoofer (P3SD4-10) provides low-frequency output where enclosure depth is limited. It features a 10" shallow driver, Dual 4‑Ohm voice coils for wiring flexibility, and a 300 Watts RMS power rating.
Best for
- Vehicles or locations with limited mounting depth
- Applications needing a compact subwoofer with adjustable wiring options
- Systems where matching a shallow sub to an appropriately rated amplifier is preferred
Key points
- 10" shallow-mount subwoofer design
- Dual 4‑Ohm voice coils (DVC) for wiring flexibility
- 300 Watts RMS power handling
- Technologies: CEA-2031, FlexFit Basket, Anodized Aluminum Voice Coil Former, Stitched Tinsel Leads, VAST Surround, Klippel Verified
Fit and use
Designed for installations where a standard-depth subwoofer won't fit. The dual 4‑ohm voice coils provide common wiring options to match typical amplifier loads. Use in sealed or ported enclosures sized for shallow drivers or in custom shallow enclosures; verify available mounting depth before purchase.
What to know
This subwoofer is optimized for limited-depth installations but still requires an amplifier that can provide appropriate RMS power. Match amplifier RMS output to the subwoofer’s 300 Watts RMS rating and confirm enclosure space and mounting dimensions. Professional installation or consultation is recommended if you are…
Highlights
Key features
- 1 Year Warranty
- M-Roll Santoprene™ surround
- Anodized aluminum cone and dustcap
- Shallow Motor Assembly
- StampCast basket with integrated spider venting
- Optimized for both sealed and vented enclosures
- Dual linear spider with embedded 16 AWG tinsel leads
- Diamond cut cast aluminum trim ring with optional grille
- CEA-2031
- FlexFit Basket - Subwoofer
- Anodized Aluminum Voice Coil Former
- Stitched Tinsel Leads
More info
Manufacturer details
Rockford Fosgate P3S 10" shallow mount subwoofer delivers “Punch” even when depth is limited. The P3SD4-10 features Dual 4-Ohm voice coils for wiring flexibility and 300 Watts RMS power handling.
Additional details
The Rockford Fosgate P3S 10" shallow mount subwoofer delivers Punch, even in depth limited situations. Rockford Fosgate understands all vehicles are not the same, because some cannot accommodate deep subwoofers. In the past, that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allow configurations for every application. Shallow woofers are specifically designed for spaces where a traditional woofer cannot be used.
Technologies
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has
FlexFit Basket - Subwoofer
The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized
Anodized Aluminum Voice Coil Former
Two things generally happen when voice coils heat-up. They can generate heat close to the melt-down temp of their
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and
Patent: Patent Pending
VAST Surround - Subs
Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
Specs
Specifications
25
| Magnet Weight (kg) NOT USED | 1.32 oz. (47 kg.) |
| Sd (cm2) | 333 |
| Nominal Impedance | Dual 4-Ohm |
| Speaker Connector | Dual 10 AWG Compression |
| Size | 10" |
| Magnet Weight (oz) | 47 oz. (1.32 Kg) |
| Voice Coil Diameter | 2.5" (65.5 mm) |
| SPL (dB @ 1w/1m) | 83 |
| Cutout Diameter | 9.06 in. (230.0 mm) |
| Woofer Displacement | 0.074 cu. ft. (2.1 Liters) |
| Fs (Hz) | 42 |
| Qms | 6.00 |
| Vas (Liters) | 14.3 |
| Shipping Weight | 11.9 Lbs. (5.39 kg.) |
| Mounting Depth | 3.50 in. (89.0 mm) |
| Qts | 0.78 |
| Qes | 0.90 |
| Xmax (mm) | 8.1 |
| Power Handling (Watts RMS) | 300 Watts RMS 600 Watts Max |
| Re (Ohms) | 6.80 |
| Le (mH) | 4.3 |
| Subwoofer Type | Shallow |
| Voice Coil Type | Dual Voice Coil |
| Sealed Box Volume (Vb) | 0.5 cu. ft. (14.1 Liters) |
| Vented Box Volume (Vb) | 1.0 cu. ft. (28.3 Liters) |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Installation resources
Wiring diagrams
9
Wiring Diagram #1
Source: Rockford Fosgate
Wiring Diagram #2
Source: Rockford Fosgate
Wiring Diagram #3
Source: Rockford Fosgate
Wiring Diagram #4
Source: Rockford Fosgate
Wiring Diagram #5
Source: Rockford Fosgate
Wiring Diagram #6
Source: Rockford Fosgate
Wiring Diagram #7
Source: Rockford Fosgate
Wiring Diagram #8
Source: Rockford Fosgate
Wiring Diagram #9
Source: Rockford Fosgate
Box Advisor
Sealed Enclosure
- Recommended volume
- 0.5 cu ft
- Volume range
- 0.4 cu ft to 1 cu ft
- Dimensions
- 20 in W x 13.5 in H x 5.5 in D
- F3
- 46.9 Hz
- Qtc
- 0.9
- Port / ID
- 14 in
- Subwoofer size
- 14 in
- Impedance
- 4 ohm
- Power handling (RMS)
- 300 W
Vented Enclosure
- Recommended volume
- 1 cu ft
- Volume range
- 0.75 cu ft to 1.25 cu ft
- Dimensions
- 24 in W x 15.5 in H x 7 in D
- F3
- 36 Hz
- Tuning (Fb)
- 47.5 Hz
- Port / ID
- 14 in
- Subwoofer size
- 14 in
- Impedance
- 4 ohm
- Power handling (RMS)
- 300 W
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Similar products
Compare nearby options
Rockford Fosgate•Punch
P3D4-10 Punch 10" P3 4-Ohm DVC Subwoofer
4.878 reviews
$349.99CAD
$419.99
In stock
Rockford Fosgate•Punch
P2D4-10 Punch 10" P2 4-Ohm DVC Subwoofer
4.947 reviews
$259.99CAD
$309.99
In stock
Rockford Fosgate•Prime
R2D4-10 Prime 10" R2 4-Ohm DVC Subwoofer
4.961 reviews
$149.99CAD
$179.99
In stock
Rockford Fosgate•Prime
R2SD4-10 Prime 10" R2S 4-Ohm DVC Shallow Subwoofer
$199.99CAD
$239.99
In stock
Rockford Fosgate•Power
T1D410 Power 10" T1 4-Ohm DVC Subwoofer
5.06 reviews
$689.99CAD
$809.99
In stock
Rockford Fosgate•Punch
P1S4-10 Punch 10" P1 4-Ohm SVC Subwoofer
4.952 reviews
$169.99CAD
$199.99
In stock
Rockford Fosgate•Punch
P1-1X10 Punch Single P1 10" Loaded Enclosure
$379.99CAD
$449.99
In stock