1 / 12
Rockford Fosgate logo
Power#T1D410

Rockford Fosgate Power T1D410Power 10" T1 4-Ohm DVC Subwoofer

5.06 reviewsSee all reviews

Variants

10" 4Ω DVC10" 4Ω DVC2 variants

Reviewers consistently praise the Rockford Fosgate Power 10" T1 DVC sub for deep, precise, low‑distortion bass that performs well in smaller enclosures and at a range of power levels.

Buyer confidence

88%

Highlights

  • 1 Year Warranty
  • Proprietary 8 AWG insulated allmetal input spring terminal connection
  • Optimized and matched magnetic and complicance geometry
  • Anodized aluminum heat sinking dust cap

Key specs

Full specs
Power Handling (Watts RMS)
600 Watts RMS 1200 Watts Max
Nominal Impedance
Dual 4-Ohm
Magnet Weight (oz)
100 oz. (2.84 kg)
Size
10"
Voice Coil Diameter
3" (75.4mm)
SPL (dB @ 1w/1m)
83
Fs (Hz)
36
Woofer Displacement
0.078 cu. ft. (2.2 Liters)

Key specs

Full specs
Power Handling (Watts RMS)
600 Watts RMS 1200 Watts Max
Nominal Impedance
Dual 4-Ohm
Magnet Weight (oz)
100 oz. (2.84 kg)
Size
10"

Highlights

Overview
  • 1 Year Warranty
  • Proprietary 8 AWG insulated allmetal input spring terminal connection
  • Optimized and matched magnetic and complicance geometry

Review highlights

Based on customer reviews

Rockford Fosgate Power 10\" T1 4-Ohm DVC Subwoofer — praised for deep, tight, low‑distortion bass

Reviewers consistently praise the Rockford Fosgate Power 10" T1 DVC sub for deep, precise, low‑distortion bass that performs well in smaller enclosures and at a range of power levels.

6 reviews5.0/5 averageUpdated Mar 15, 2026

What buyers praise

  • Deep, tight, and precise bass across music genres
  • Low distortion even at high output

What to watch for

  • Many reviewers note one sub is sufficient for sonic quality; adding multiple units can be more than needed unless pursuing competition‑level output
Overview

The Rockford Fosgate Power T1D410 is a 10" dual 4‑Ohm DVC subwoofer rated at 600 Watts RMS. It uses VAST cone technology and a FlexFit basket to increase effective cone area and simplify installations while maintaining high power handling.

Best for

  • Car audio setups needing a compact 10" sub with high RMS handling
  • Installations that benefit from dual 4‑Ohm voice coil wiring flexibility
  • Systems where increased cone surface (VAST) is desired for stronger low-frequency output

Key points

  • Size: 10-inch subwoofer
  • Power handling: 600 Watts RMS
  • Voice coils: Dual 4‑Ohm (DVC)
  • Includes grille with integral trim ring
  • VAST Surround increases cone surface area (up to 25%)
  • FlexFit basket for flexible mounting options

Fit and use

Match the subwoofer to an amplifier that can safely drive 600 Watts RMS and is compatible with the impedance presented by wiring the dual 4‑Ohm voice coils. Confirm your enclosure type and vehicle mounting space before purchase; the FlexFit basket provides installation flexibility but dimensions should be checked against available clearance.

What to know

This model emphasizes compact footprint with technologies that increase effective cone area. Verify amplifier power and impedance compatibility, check mounting depth and clearance in your vehicle, and select an enclosure appropriate for subwoofer use. The product is Klippel Verified and follows CEA-2031 measurement re…

Highlights

Key features

  • 1 Year Warranty
  • Proprietary 8 AWG insulated allmetal input spring terminal connection
  • Optimized and matched magnetic and complicance geometry
  • Anodized aluminum heat sinking dust cap
  • Kevlar fiber reinforced paper cone
  • Anodized aluminum voice coil former / copper clad aluminum wire
  • Periodic-stitched fatigue resistant tinsel lead wire
  • Optimized pole piece and spider venting
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Rigid die-cast aluminum basket
  • Symmetrical dual progressive roll tear resistant poly-cotton spiders
  • Stitched Tinsel Leads
More info

Manufacturer details

Innovative technologies allow the T1D410 subwoofer to perform like a larger woofer over the previous model. The T1 10” features dual 4-Ohm voice coils, 600 Watts RMS power handling, and includes a grille with integral trim ring.

Additional details

The Power Series T1D410 Dual 4-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D410 performs like a much larger woofer over the previous model. The new FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the T1D410 is here!

Technologies
Stitched Tinsel Leads

Stitched Tinsel Leads

Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and

VAST Surround - Subs
Patent: Patent Pending

VAST Surround - Subs

Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective

CEA-2031

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has

SWIFT™ Terminals

SWIFT™ Terminals

Removing and inverting the center plug allows the voice coils to quickly be configured in a Series or Parallel

Inductive Damping Heat Sink

Inductive Damping Heat Sink

Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back

Anodized Aluminum Voice Coil Former

Anodized Aluminum Voice Coil Former

Two things generally happen when voice coils heat-up. They can generate heat close to the melt-down temp of their

Klippel Verified

Klippel Verified

To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be

FlexFit Basket - Subwoofer

FlexFit Basket - Subwoofer

The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized

Specs

Specifications

24
Power Handling (Watts RMS)600 Watts RMS 1200 Watts Max
Nominal ImpedanceDual 4-Ohm
Magnet Weight (oz)100 oz. (2.84 kg)
Size10"
Voice Coil Diameter3" (75.4mm)
SPL (dB @ 1w/1m)83
Fs (Hz)36
Woofer Displacement0.078 cu. ft. (2.2 Liters)
Qes0.73
Cutout Diameter9.0625 in. (230 mm)
Qts0.65
Speaker ConnectorCompression Terminal
Mounting Depth6.375 in. (161.9 mm)
Speaker ConnectorCompression Terminal
Qms5.70
Shipping Weight25.7 Lbs. (11.65 Kg.)
Vas (Liters)15.7
Xmax (mm)16
Re (Ohms)6.50
Le (mH)2.5
Subwoofer TypeStandard
Voice Coil TypeDual Voice Coil
Sealed Box Volume (Vb)0.75 cu. ft. (21.2 Liters)
Vented Box Volume (Vb)1.5 cu. ft. (42.4 Liters)
Reviews (0)

No average rating yet

0 reviews

No written reviews are live yet. Signed-in customers can submit one below.

Own this product?

Share installation notes, sound quality feedback, and fitment tips. Customer reviews are saved in the same database and go live after moderation.

Checking account status...

No written reviews are live for this item yet.

Installation resources

Wiring diagrams

9
Wiring Diagram #1

Wiring Diagram #1

Source: Rockford Fosgate

Wiring Diagram #2

Wiring Diagram #2

Source: Rockford Fosgate

Wiring Diagram #3

Wiring Diagram #3

Source: Rockford Fosgate

Wiring Diagram #4

Wiring Diagram #4

Source: Rockford Fosgate

Wiring Diagram #5

Wiring Diagram #5

Source: Rockford Fosgate

Wiring Diagram #6

Wiring Diagram #6

Source: Rockford Fosgate

Wiring Diagram #7

Wiring Diagram #7

Source: Rockford Fosgate

Wiring Diagram #8

Wiring Diagram #8

Source: Rockford Fosgate

Wiring Diagram #9

Wiring Diagram #9

Source: Rockford Fosgate

Box Advisor
Sealed Enclosure diagram

Sealed Enclosure

Recommended volume
0.75 cu ft
Volume range
0.5 cu ft to 1 cu ft
Dimensions
16.75 in W x 14 in H x 9 in D
F3
42.8 Hz
Qtc
0.87
Port / ID
36 in
Subwoofer size
38 in
Impedance
4 ohm
Power handling (RMS)
600 W
Vented Enclosure diagram

Vented Enclosure

Recommended volume
1.5 cu ft
Volume range
1.25 cu ft to 1.75 cu ft
Dimensions
20.25 in W x 15.5 in H x 12.5 in D
F3
30.8 Hz
Tuning (Fb)
40.1 Hz
Port / ID
38 in
Subwoofer size
38 in
Impedance
4 ohm
Power handling (RMS)
600 W
Open official Box Advisor
Support

Knowledge Base Articles

  • No Knowledge Base articles

Show all Knowledge Base topics

Ask Our Experts

Return Authorization

If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.



Popular Questions

No FAQs available

Accessories