1 / 8
Variants
Delivers tight, punchy low end and impressive output for its size at a budget-friendly price; performs especially well in sealed enclosures and when paired with a capable amp.
Buyer confidence
89%Highlights
- 1 Year Warranty
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
- Rubberized ABS trim ring with optional grille
Key specs
Full specs- Magnet Weight (oz)
- 45 oz. (1.28 kg.)
- Subwoofer Type
- Standard
- Speaker Connector
- Dual 10 AWG compression
- Voice Coil Type
- Single Voice Coil
- Nominal Impedance
- 4-Ohm
- Size
- 10"
- Power Handling (Watts RMS)
- 250 Watts RMS 500 Watts Max
- Qms
- 3.00
Key specs
Full specs- Magnet Weight (oz)
- 45 oz. (1.28 kg.)
- Subwoofer Type
- Standard
- Speaker Connector
- Dual 10 AWG compression
- Voice Coil Type
- Single Voice Coil
Highlights
Overview- 1 Year Warranty
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
Review highlights
Based on customer reviews10" Punchy subwoofer that delivers deep bass and strong value
Delivers tight, punchy low end and impressive output for its size at a budget-friendly price; performs especially well in sealed enclosures and when paired with a capable amp.
What buyers praise
- Punchy, deep bass — hits hard for a 10"
- Great value for the price
What to watch for
- Gets best results when driven by a compatible amp with adequate power
Overview
The P1S4-10 is a 10" Punch subwoofer with a 4‑ohm single voice coil and 250 Watts RMS handling. It uses a Kevlar fiber‑reinforced paper cone and VAST cone geometry for increased surface area, and includes a soft‑touch ABS trim ring to accept a grille insert.
Best for
- Car audio listeners who want tight
- impactful low-frequency output from a compact 10" subwoofer suitable for sealed or vented enclosures.
Key points
- 10" driver diameter
- 4‑Ohm single voice coil (SVC)
- 250 Watts RMS power handling
- Kevlar fiber‑reinforced paper cone
- VAST technology increases cone surface area up to 25%
- Includes soft‑touch ABS trim ring to accommodate a grille insert
Fit and use
Designed for standard 10" subwoofer enclosures. Performs well in both sealed and vented cabinets; enclosure design and tuning will affect output and low‑end extension. Use an amplifier matched to the subwoofer’s 4‑ohm impedance and power rating for reliable performance.
What to know
Match amplifier power and impedance to the subwoofer’s 4‑ohm SVC and 250W RMS rating. Enclosure type and volume materially influence bass character and output. The included ABS trim ring accepts a grille insert but other grille or mounting hardware compatibility depends on your enclosure and vehicle — consult enclosur…
Highlights
Key features
- 1 Year Warranty
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
- Rubberized ABS trim ring with optional grille
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Linear spider with embedded 16 AWG tinsel leads
- Extended pole piece and bumped vented backplate
- Custom 10-AWG nickel plated push terminals
- Protective PVC textured magnet cover
- Klippel Verified
- Anodized Aluminum Voice Coil Former
- FlexFit Basket - Subwoofer
More info
Manufacturer details
Rockford Fosgate P1 10” is the first in a family of famous “Punch” subwoofers. The P1S4-10 features a 4-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring.
Additional details
Rockford Fosgate P1 10" are the first in a family of world famous subwoofers called "The Punch". During their inception in the 1980's, they quickly became "The Woofer of Choice" for fanatic car audio systems, with a continued tradition today. Kevlar fiber reinforced paper cones deliver bass impact you can feel, and our VAST technology increases surface cone area up to 25%. Best in standard sealed and vented enclosures. Includes soft touch ABS trim ring.
Technologies
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
Anodized Aluminum Voice Coil Former
Two things generally happen when voice coils heat-up. They can generate heat close to the melt-down temp of their
FlexFit Basket - Subwoofer
The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has
Specs
Specifications
25
| Magnet Weight (oz) | 45 oz. (1.28 kg.) |
| Subwoofer Type | Standard |
| Speaker Connector | Dual 10 AWG compression |
| Voice Coil Type | Single Voice Coil |
| Nominal Impedance | 4-Ohm |
| Size | 10" |
| Power Handling (Watts RMS) | 250 Watts RMS 500 Watts Max |
| Qms | 3.00 |
| Qes | 0.61 |
| Qts | 0.52 |
| Fs (Hz) | 30 |
| Voice Coil Diameter | 2.0" (51.6 mm) |
| Sd (cm2) | 370 |
| Vas (Liters) | 40 |
| Re (Ohms) | 3.6 |
| SPL (dB @ 1w/1m) | 85 |
| Mounting Depth | 5.33 in. (135.4 mm) |
| SPL (dB @ 2.8v/1m) | 88 |
| Le (mH) | 2.81 |
| Xmax (mm) | 9.0 |
| Cutout Diameter | 9.14 in. (232 mm) |
| Woofer Displacement | 0.056 cu. ft. (1.6 Liters) |
| Shipping Weight | 10.9 Lbs. (4.94 kg) |
| Sealed Box Volume (Vb) | 0.59 cu. ft. (16.7 Liters) |
| Vented Box Volume (Vb) | 1.4 cu. ft. (39.6 Liters) |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Installation resources
Wiring diagrams
6
Wiring Diagram #1
Source: Rockford Fosgate
Wiring Diagram #2
Source: Rockford Fosgate
Wiring Diagram #3
Source: Rockford Fosgate
Wiring Diagram #4
Source: Rockford Fosgate
Wiring Diagram #5
Source: Rockford Fosgate
Wiring Diagram #6
Source: Rockford Fosgate
Box Advisor
Sealed Enclosure
- Recommended volume
- 0.59 cu ft
- Volume range
- 0.5 cu ft to 0.85 cu ft
- Dimensions
- 14 in W x 12 in H x 9.25 in D
- F3
- 48.9 Hz
- Qtc
- 0.87
- Port / ID
- 50 in
- Subwoofer size
- 52 in
- Impedance
- 1 ohm
- Power handling (RMS)
- 250 W
Vented Enclosure
- Recommended volume
- 1.4 cu ft
- Volume range
- 1.25 cu ft to 1.65 cu ft
- Dimensions
- 20 in W x 12 in H x 14 in D
- F3
- 32 Hz
- Tuning (Fb)
- 37.3 Hz
- Port / ID
- 52 in
- Subwoofer size
- 52 in
- Impedance
- 1 ohm
- Power handling (RMS)
- 250 W
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Similar products
Compare nearby options
Rockford Fosgate•Prime
R2D4-10 Prime 10" R2 4-Ohm DVC Subwoofer
4.961 reviews
$149.99CAD
$179.99
In stock
Rockford Fosgate•Prime
R2SD4-10 Prime 10" R2S 4-Ohm DVC Shallow Subwoofer
$199.99CAD
$239.99
In stock
Rockford Fosgate•Punch
P2D4-10 Punch 10" P2 4-Ohm DVC Subwoofer
4.947 reviews
$259.99CAD
$309.99
In stock
Rockford Fosgate•Punch
P3D4-10 Punch 10" P3 4-Ohm DVC Subwoofer
4.878 reviews
$349.99CAD
$419.99
In stock
Rockford Fosgate•Punch
P3SD4-10 Punch 10" P3S Shallow 4-Ohm DVC Subwoofer
4.633 reviews
$329.99CAD
$389.99
In stock
Rockford Fosgate•Power
T1D410 Power 10" T1 4-Ohm DVC Subwoofer
5.06 reviews
$689.99CAD
$809.99
In stock
Rockford Fosgate•Punch
P1-1X10 Punch Single P1 10" Loaded Enclosure
$379.99CAD
$449.99
In stock