Variants
Reviewers say this Rockford Fosgate Punch 10" P2 sub delivers tight, loud bass and is easy to install — it’s a high-output, tuneable 10" that performs well in both sealed and vented setups when paired with the right amplifier.
Buyer confidence
87%Highlights
- 1 Year Warranty
- Kevlar fiber reinforced paper cone
- Diamond cut cast aluminum trim ring with optional grille
- StampCast basket with integrated spider venting
Key specs
Full specs- Power Handling (Watts RMS)
- 300 Watts RMS 600 Watts Max
- Qms
- 7.00
- Size
- 10"
- Nominal Impedance
- Dual 2-Ohm
- Mounting Depth
- 5.92 in. (150.4 mm)
- Voice Coil Diameter
- 2.25" (57.15 mm)
- SPL (dB @ 1w/1m)
- 84
- Woofer Displacement
- 0.060 cu. ft. (1.7 Liters)
Key specs
Full specs- Power Handling (Watts RMS)
- 300 Watts RMS 600 Watts Max
- Qms
- 7.00
- Size
- 10"
- Nominal Impedance
- Dual 2-Ohm
Highlights
Overview- 1 Year Warranty
- Kevlar fiber reinforced paper cone
- Diamond cut cast aluminum trim ring with optional grille
Review highlights
Based on customer reviewsRockford Fosgate Punch 10" P2 2-Ohm DVC Subwoofer — compact, punchy bass
Reviewers say this Rockford Fosgate Punch 10" P2 sub delivers tight, loud bass and is easy to install — it’s a high-output, tuneable 10" that performs well in both sealed and vented setups when paired with the right amplifier.
What buyers praise
- Punchy, tight bass response and good frequency control
- High output for a 10" — bangs hard and rattles appropriately
What to watch for
- Per reviewers, it performs best when paired with a capable amplifier and correct wiring/impedance planning
Overview
The Punch P2D2-10 is a 10-inch car and truck subwoofer engineered for impactful bass. It combines a Dual 2‑Ohm voice coil with 300 Watts RMS handling and Rockford Fosgate’s VAST surround design.
Best for
- Car and truck audio systems requiring a compact 10" subwoofer with strong output and proven cone technology.
Key points
- 10-inch subwoofer designed for cars and trucks
- 300 Watts RMS power handling
- Dual 2-Ohm voice coil (DVC)
- Kevlar fiber reinforced paper cone
- VAST surround increases effective cone area up to 25%
- Diamond-cut cast aluminum trim ring (accommodates optional grille insert)
Fit and use
Performs best in standard sealed and vented enclosures. Meant for installation in vehicle audio systems; the included cast aluminum trim ring can accept an optional grille insert. Refer to enclosure and amp specifications to match power and mounting requirements.
What to know
Rated at 300 Watts RMS and equipped with a Dual 2‑Ohm voice coil. VAST surround increases cone surface area for more acoustic output. Product is Klippel Verified and meets CEA-2031 standards. A diamond-cut cast aluminum trim ring is included; an optional grille insert is available separately.
Key features
- 1 Year Warranty
- Kevlar fiber reinforced paper cone
- Diamond cut cast aluminum trim ring with optional grille
- StampCast basket with integrated spider venting
- Custom 10-AWG nickel plated push terminals
- Protective PVC textured magnet cover
- Extended pole piece and bumped vented backplate
- Dual linear spider with embedded 16 AWG tinsel leads
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Stitched Tinsel Leads
- CEA-2031
- VAST Surround - Subs
More info
Manufacturer details
The Rockford Fosgate P2 10 inch subwoofer for cars and trucks continues “The PUNCH” tradition. The P2D2-10 sub features a Dual 2-Ohm voice coil (DVC), 300 Watts RMS power handling, and can accommodate a grille insert using the included cast aluminum trim ring. The P2D2 10 inch subwoofer also includes:
Additional details
Looking for more options? Check out all of our subwoofers.
Technologies
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and

CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has

VAST Surround - Subs
Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective

FlexFit Basket - Subwoofer
The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized
Anodized Aluminum Voice Coil Former
Two things generally happen when voice coils heat-up. They can generate heat close to the melt-down temp of their

Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
Specs
Specifications
| Power Handling (Watts RMS) | 300 Watts RMS 600 Watts Max |
| Qms | 7.00 |
| Size | 10" |
| Nominal Impedance | Dual 2-Ohm |
| Mounting Depth | 5.92 in. (150.4 mm) |
| Voice Coil Diameter | 2.25" (57.15 mm) |
| SPL (dB @ 1w/1m) | 84 |
| Woofer Displacement | 0.060 cu. ft. (1.7 Liters) |
| Le (mH) | 3.32 |
| Qes | 0.54 |
| Vas (Liters) | 35.4 |
| Xmax (mm) | 11 |
| Fs (Hz) | 29 |
| Shipping Weight | 13.6 Lbs. (6.16 kg) |
| Speaker Connector | Dual 10 AWG compression |
| Magnet Weight (oz) | 66.4 oz. (1.88 kg.) |
| Qts | 0.50 |
| Cutout Diameter | 9.13 in. (232 mm) |
| Sd (cm2) | 360 |
| Re (Ohms) | 3.20 |
| Subwoofer Type | Standard |
| Voice Coil Type | Dual Voice Coil |
| Sealed Box Volume (Vb) | 0.59 cu. ft. (16.7 Liters) |
| Vented Box Volume (Vb) | 1.4 cu. ft. (39.6 Liters) |
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Installation resources
Wiring diagrams
Box Advisor

Sealed Enclosure
- Recommended volume
- 0.59 cu ft
- Volume range
- 0.5 cu ft to 0.85 cu ft
- Dimensions
- 14 in W x 12 in H x 9.25 in D
- F3
- 46.8 Hz
- Qtc
- 0.82
- Port / ID
- 57 in
- Subwoofer size
- 59 in
- Impedance
- 3 ohm
- Power handling (RMS)
- 300 W

Vented Enclosure
- Recommended volume
- 1.4 cu ft
- Volume range
- 1.25 cu ft to 1.75 cu ft
- Dimensions
- 20 in W x 12 in H x 14 in D
- F3
- 32.9 Hz
- Tuning (Fb)
- 40 Hz
- Port / ID
- 59 in
- Subwoofer size
- 59 in
- Impedance
- 3 ohm
- Power handling (RMS)
- 300 W
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Similar products





















