Variants
Reviewers praise its tight, hard-hitting bass, strong build and long-term reliability — performs best with a proper enclosure and sensible power matching.
Buyer confidence
89%Highlights
- Rubberized over-mold for greater grip
- 1 Year Warranty
- Anodized aluminum cone and dustcap
- Diamond cut cast aluminum trim ring with optional grille
Key specs
Full specs- Power Handling (Watts RMS)
- 500 Watts RMS 1000 Watts Max
- Shipping Weight
- 17.3 Lbs. (7.8 kg)
- Nominal Impedance
- Dual 2-Ohm
- Sd (cm2)
- 360
- Speaker Connector
- Dual 10 AWG compression
- Size
- 10"
- Mounting Depth
- 6.18 in. (156.8 mm)
- Voice Coil Diameter
- 2.5" (65.5 mm)
Key specs
Full specs- Power Handling (Watts RMS)
- 500 Watts RMS 1000 Watts Max
- Shipping Weight
- 17.3 Lbs. (7.8 kg)
- Nominal Impedance
- Dual 2-Ohm
- Sd (cm2)
- 360
Highlights
Overview- Rubberized over-mold for greater grip
- 1 Year Warranty
- Anodized aluminum cone and dustcap
Review highlights
Based on customer reviewsPunchy, well-built 10" sub with clean, musical bass
Reviewers praise its tight, hard-hitting bass, strong build and long-term reliability — performs best with a proper enclosure and sensible power matching.
What buyers praise
- Hard-hitting, punchy bass
- Clean, musical sound and good SQ at varied levels
What to watch for
- Needs proper enclosure volume (reviewers cited ~1.15 cu ft sealed / ~1.4 cu ft ported guidance)
Overview
The P3D2-10 is a 10" Punch-series subwoofer from Rockford Fosgate offering 500 Watts RMS power handling, dual 2‑ohm voice coils, and enhancements for improved thermal and mechanical performance.
Best for
- Car audio systems that need a compact 10" sub with high power handling and flexible wiring options via dual 2‑ohm voice…
Key points
- 10" driver with Dual 2‑Ohm voice coils (DVC).
- 500 Watts RMS power handling.
- Anodized aluminum cone and dustcap with anodized aluminum voice coil former.
- VAST surround increases effective cone area for stronger output.
- FlexFit basket and hybrid stamp-cast basket for durable, low-resonance mounting.
- Spider venting for improved motor cooling.
Fit and use
Mounts in standard 10" subwoofer openings; the FlexFit basket helps with fitment variations. Dual 2‑ohm voice coils allow different wiring configurations to suit amplifier and system impedance requirements.
What to know
• Match the subwoofer's 500W RMS rating with an appropriately rated amplifier for optimal performance. • Klippel verification and CEA-2031 references indicate measured performance engineering; consult official specs for detailed parameters. • The product includes a cast aluminum trim ring to accept a grille insert as…
Key features
- Rubberized over-mold for greater grip
- 1 Year Warranty
- Anodized aluminum cone and dustcap
- Diamond cut cast aluminum trim ring with optional grille
- Custom 10-AWG nickel plated push terminals
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Protective PVC textured magnet cover
- Extended pole piece and bumped vented backplate
- StampCast basket with integrated spider venting
- Stitched Tinsel Leads
- CEA-2031
- VAST Surround - Subs
More info
Manufacturer details
The P3D2-10 is the best performing Rockford Fosgate Punch series subwoofer. The P3 10” features Dual 2-Ohm voice coils, 500 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.
Additional details
The P3D2-10 is Rockford Fosgate's best performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dustcaps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme installations. Best of all, a new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance.
Technologies
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and

CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has

VAST Surround - Subs
Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective

FlexFit Basket - Subwoofer
The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized
Anodized Aluminum Voice Coil Former
Two things generally happen when voice coils heat-up. They can generate heat close to the melt-down temp of their

Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
Specs
Specifications
| Power Handling (Watts RMS) | 500 Watts RMS 1000 Watts Max |
| Shipping Weight | 17.3 Lbs. (7.8 kg) |
| Nominal Impedance | Dual 2-Ohm |
| Sd (cm2) | 360 |
| Speaker Connector | Dual 10 AWG compression |
| Size | 10" |
| Mounting Depth | 6.18 in. (156.8 mm) |
| Voice Coil Diameter | 2.5" (65.5 mm) |
| Fs (Hz) | 26.6 |
| Woofer Displacement | 0.070 cu. ft. (2.0 Liters) |
| Qes | 0.54 |
| Qms | 6.00 |
| Vas (Liters) | 27.0 |
| Le (mH) | 4.5 |
| SPL (dB @ 1w/1m) | 82 |
| Qts | 0.49 |
| Cutout Diameter | 9.13 in. (232 mm) |
| Magnet Weight (oz) | 81 oz. (2.30 kg.) |
| Xmax (mm) | 15.2 |
| Re (Ohms) | 3.20 |
| Subwoofer Type | Standard |
| Voice Coil Type | Dual Voice Coil |
| Sealed Box Volume (Vb) | 0.59 cu. ft. (16.7 Liters) |
| Vented Box Volume (Vb) | 1.4 cu. ft. (39.6 Liters) |
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Installation resources
Wiring diagrams
Box Advisor

Sealed Enclosure
- Recommended volume
- 0.59 cu ft
- Volume range
- 0.5 cu ft to 0.75 cu ft
- Dimensions
- 14 in W x 12 in H x 9.25 in D
- F3
- 42.6 Hz
- Qtc
- 0.76
- Port / ID
- 63 in
- Subwoofer size
- 65 in
- Impedance
- 3 ohm
- Power handling (RMS)
- 500 W

Vented Enclosure
- Recommended volume
- 1.4 cu ft
- Volume range
- 1.25 cu ft to 1.75 cu ft
- Dimensions
- 20 in W x 12 in H x 14 in D
- F3
- 31.6 Hz
- Tuning (Fb)
- 40 Hz
- Port / ID
- 65 in
- Subwoofer size
- 65 in
- Impedance
- 3 ohm
- Power handling (RMS)
- 500 W
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Similar products





















