1 / 5
Rockford Fosgate Power T1S2-10PPower 10" T1 Slim 2Ω SVC Subwoofer for Ported Enclosures
Variants
The re-engineered T1 Slim series delivers tactile bass and improved responsiveness in a shallow profile. The Power T1S2-10P is the 10" ported ('P') model with a single 2Ω voice coil, designed for tight installations. Sold individually.
Highlights
- Supercritical synthetic organic polymer surround
- Linear Carbon Fiber/PMI/Glass Fiber cone with aluminum dustcap
- Co-molded surround and cone body chemically bonded for high durability
- Symmetrical ultra-flexible braided flat tinsel leads resistant to fatigue
Key specs
Full specs- Size
- 10"
- Subwoofer Type
- Shallow
- Frequency Response
- 28 - 250 Hz
- Nominal Impedance
- 2-Ohm
- Fs (Hz)
- 43.5
- Qes
- 1.17
- Qms
- 9.21
- Qts
- 1.04
Key specs
Full specs- Size
- 10"
- Subwoofer Type
- Shallow
- Frequency Response
- 28 - 250 Hz
- Nominal Impedance
- 2-Ohm
Highlights
Overview- Supercritical synthetic organic polymer surround
- Linear Carbon Fiber/PMI/Glass Fiber cone with aluminum dustcap
- Co-molded surround and cone body chemically bonded for high durability
Overview
The re-engineered T1 Slim series delivers tactile bass and improved responsiveness in a shallow profile. The Power T1S2-10P is the 10" ported ('P') model with a single 2Ω voice coil, designed for tight installations. Sold individually.
Best for
- Compact or shallow installation spaces
- Small ported enclosures
- Open-air/convertible setups where ported performance is desired
- Listeners who want strong low-frequency impact from a slim subwoofer
Key points
- Slim 10" profile engineered for limited-depth installations
- Single 2Ω single voice coil (SVC) configuration
- Re-engineered suspension and surround using Nano Cell Direct Injection (NCDI) and bonded co-molded surround for durability and efficient bass extension
- VCCF (Voice Coil Composite Former) with pure copper voice coil for improved heat dissipation and reduced motor distortion
- Asymmetric aligned dual-spider design to maintain coil alignment and excursion control
- Enhanced thermal management via inductive damping and heat-sink measures
Fit and use
Designed for small ported enclosures and shallow mounting locations. The 'P' designation indicates the ported model; enclosure tuning and volume will affect low-frequency response. The subwoofer is sold individually (1 each).
What to know
Sold individually. This is the ported-version slim 10" subwoofer with a single 2Ω voice coil—sealed variants are offered separately. It uses composite voice coil materials and improved thermal design to maintain performance during extended use. For intended performance, use an appropriately designed and tuned ported e…
Highlights
Key features
- Supercritical synthetic organic polymer surround
- Linear Carbon Fiber/PMI/Glass Fiber cone with aluminum dustcap
- Co-molded surround and cone body chemically bonded for high durability
- Symmetrical ultra-flexible braided flat tinsel leads resistant to fatigue
- Dual Nomex progressive spiders with stitched tinsel leads
- Dual wound single 2.5" pure copper voice coil with interior and exterior coils
- 1 Year Warranty
- Diecast aluminum frame with integrated heat sink fins
- Custom 10 AWG slot loaded brass push spring terminals with corrosion resistant tin plating
- Detachable die cast aluminum trim ring
- Optional protective grille insert available
- Optimized for compact ported enclosures
More info
Manufacturer details
The re-engineered T1 Slim subwoofer series delivers next-level reliability and tactile bass performance, offering improved responsiveness and exceptional thermal management. Available in both sealed and ported options, these subwoofers are designed for the tightest installations, while still providing all the bass you demand. Sold individually (1 each).
Sound of Surround – Utilizing Nano Cell Direct injection and a bonded co-molded surround, the T1 series subwoofers ensures maximum reliability and high efficiency low end bass extension.
VCCF (Voice Coil Composite Former) – The voice coil is the heart of any speaker, and ours is crafted from a specialized composite material rigorously tested to withstand extreme heat and low thermal conditions, ensuring no-quit power and minimal motor distortion.
Dual Spiders – The voice coil carrier features a asymmetric aligned 2-spider design to deliver enhanced bass response. Each spider works together to handle a range of low-end notes, ensuring you never miss any bass hits in your music.
Perfect Fit – Available in multiple options, including sealed and ported options, these subwoofers make it easy to find the perfect fit for any installation, no matter the space.
Additional details
MAX BASS, SLIM SPACE
This Gen-2 version of Rockford Fosgate’s "T1 Slim" subwoofer is designed to deliver big bass in a compact, shallow design. It’s been re-engineered with more mass to fit in smaller enclosures and includes upgrades like a new surround and better heat management. The “P” (ported) version is designed for ported enclosures and work best in open-air environments (convertible).
The voice coil now uses pure copper wire for better conductivity, paired with a new composite former to dissipate heat and reduce distortion. The suspension utilizes a new polymer surround, made using an advanced NCDI (Nano Cell Direct Injection) process to enhance efficiency and durability without risking dry-rot.
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
IDHS™ Inductive Damping Heat Sink
Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and
Patent: 9,025,809
EVCC
Our EVCC (Encapsulated Voice Coil Coupling) technology connects to the woofers voice coil from both the ...
Patent: Patent Pending
VAST Surround - Subs
Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective
FlexFit Basket - Subwoofer
The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
Patent: 9,008,348
SYMS
The unique motor structure design allows full excursion capabilities of the woofers voice coil while allowing ...
NCDI Surround
This improved surround uses a supercritical synthetic organic polymer created through an NDCI (Nano-Cell Direct
Showing the main technologies for this product.
Specs
Specifications
26
| Size | 10" |
| Subwoofer Type | Shallow |
| Frequency Response | 28 - 250 Hz |
| Nominal Impedance | 2-Ohm |
| Fs (Hz) | 43.5 |
| Qes | 1.17 |
| Qms | 9.21 |
| Qts | 1.04 |
| Vas (Liters) | 13.1 |
| Sd (cm2) | 356 |
| Re (Ohms) | 1.6 |
| Le (mH) | 0.42 |
| Voice Coil Type | Single Voice Coil |
| Power Handling (Watts RMS) | 500 Watts RMS 1000 Watts Max |
| Xmax (mm) | 15 |
| SPL (dB @ 1w/1m) | 83 |
| Speaker Connector | 10 AWG slot loaded |
| Mounting Depth | 3.01 in. (76.5 mm) |
| Cutout Diameter | 9.13 in. (232 mm) |
| Magnet Weight (oz) | 15.1 oz. (0.43 Kg) |
| Voice Coil Diameter | 2.5" (63.5mm) |
| Vented Box Volume (Vb) | 1.0 - 1.50 cu.ft. (28.3 - 42.5 Liters) |
| In The Box | (1) 1125-73494-01 Bit Driver, 40mm 5.0mm (4) 1125-80626-01 4mm Hex, M5x43mm (8) 1125-80626-01 4mm Hex, M5x43mm Self Tap |
| Shipping Weight | 11 Lbs. (4.99 Kg.) |
| Woofer Displacement | 0.028 cu. ft. (0.82 Liters) |
| Sealed Box Volume (Vb) | Not Recommended |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Installation resources
Wiring diagrams
7
Wiring Diagram #1
Source: Rockford Fosgate
Wiring Diagram #2
Source: Rockford Fosgate
Wiring Diagram #3
Source: Rockford Fosgate
Wiring Diagram #4
Source: Rockford Fosgate
Wiring Diagram #5
Source: Rockford Fosgate
Wiring Diagram #6
Source: Rockford Fosgate
Wiring Diagram #7
Source: Rockford Fosgate
Box Advisor
Diagram unavailable
Vented Enclosure
- Recommended volume
- 1.25 cu ft
- Volume range
- 1 cu ft to 1.5 cu ft
- Dimensions
- 32 in W x 14 in H x 7.75 in D
- F3
- 38 Hz
- Tuning (Fb)
- 40 Hz
- Port / ID
- 113 in
- Subwoofer size
- 118 in
- Impedance
- 5 ohm
- Power handling (RMS)
- 500 W
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Videos
T1 Slim Launch
Announcing the re-engineered T1 Slim subwoofer series that delivers next-level reliability and tactile bass performance, offering improved responsiveness and exceptional thermal management.
Similar products
Compare nearby options
Rockford Fosgate•Power
T1D210 Power 10" T1 2-Ohm DVC Subwoofer
5.06 reviews
$689.99CAD
$809.99
In stock
Rockford Fosgate•Punch
P1S2-10 Punch 10" P1 2-Ohm SVC Subwoofer
4.732 reviews
$169.99CAD
$199.99
In stock
Rockford Fosgate•Punch
P3D2-10 Punch 10" P3 2-Ohm DVC Subwoofer
5.043 reviews
$349.99CAD
$419.99
In stock
Rockford Fosgate•Punch
P3SD2-10 Punch 10" P3S Shallow 2-Ohm DVC Subwoofer
4.849 reviews
$329.99CAD
$389.99
In stock
Rockford Fosgate•Punch
P2D2-10 Punch 10" P2 2-Ohm DVC Subwoofer
4.936 reviews
$259.99CAD
$309.99
In stock
Rockford Fosgate•Prime
R2SD2-10 Prime 10" R2S 2-Ohm DVC Shallow Subwoofer
5.01 review
$199.99CAD
$239.99
In stock
Rockford Fosgate•Prime
R2D2-10 Prime 10" R2 2-Ohm DVC Subwoofer
4.770 reviews
$149.99CAD
$179.99
In stock
Cerwin Vega
XED10V2 XED Series 10” SVC Subwoofer (4Ω)
$135.99CAD
In stock