1 / 6
Rockford Fosgate Punch P1-2X10Punch Dual P1 10" Loaded Enclosure
The Punch Dual P1 10" Loaded Enclosure is a vented, factory-tuned dual 10" subwoofer enclosure rated for 500 Watts RMS when wired to a 2‑Ohm load. It uses 5/8" MDF construction, high-density carpet covering and quick-release compression terminals for connections.
Highlights
- Proprietary high-flow, low-noise port
- Constructed with 5/8" MDF
- 1 Year Warranty
- High current binding posts
Key specs
Full specs- Nominal Impedance (ea)
- 2-Ohm Internally wired to create a 2-Ohm amplifier load
- Power Handling (Watts RMS)
- 500 Watts RMS 1000 Watts Max
- Enclosure Material
- 5/8" MDF (Medium Density Fiberboard)
- Woofer Quantity
- 2
- Woofer Series
- Punch P1 (P1S4-10)
- DimensionsBox (H x W x D)Wedge (H x W x D1 x D2)
- 13.125" x 31.125" x 15.125" (33.3cm x 79.1cm x 38.4cm)
- Woofer Size
- 10"
- Enclosure Type
- Vented
Key specs
Full specs- Nominal Impedance (ea)
- 2-Ohm Internally wired to create a 2-Ohm amplifier load
- Power Handling (Watts RMS)
- 500 Watts RMS 1000 Watts Max
- Enclosure Material
- 5/8" MDF (Medium Density Fiberboard)
- Woofer Quantity
- 2
Highlights
Overview- Proprietary high-flow, low-noise port
- Constructed with 5/8" MDF
- 1 Year Warranty
Overview
The Punch Dual P1 10" Loaded Enclosure is a vented, factory-tuned dual 10" subwoofer enclosure rated for 500 Watts RMS when wired to a 2‑Ohm load. It uses 5/8" MDF construction, high-density carpet covering and quick-release compression terminals for connections.
Best for
- Adding low-frequency bass quickly with a drop-in loaded enclosure
- Installations where lighter-weight enclosures are preferable for moving in and out of a vehicle
- Systems matched to a 2‑Ohm nominal load and up to 500W RMS power handling
Key points
- Dual P1 10" vented loaded enclosure
- 500 Watts RMS power handling (wired to a 2‑Ohm load)
- Constructed from 5/8" MDF and covered in high-density carpet
- Quick-release compression terminals for speaker connections
- Tuned using computer-aided design; tonal performance similar to P2 and P3 models but lighter
- Technologies: Klippel Verified, CEA-2031
Fit and use
This is a factory-loaded enclosure intended as a drop-in solution to add low-frequency output to a vehicle audio system. It is tuned for the included Punch woofers and rated for a 2‑Ohm load at up to 500W RMS. Confirm physical space in your vehicle and amplifier matching before purchasing.
What to know
The enclosure is built with 5/8" MDF and finished in high-density carpet; it features quick-release compression terminals for easier wiring. Detailed external dimensions, weight, and full specification sheets are not included here—refer to the product reference for complete specs and compatibility information.
Highlights
Key features
- Proprietary high-flow, low-noise port
- Constructed with 5/8" MDF
- 1 Year Warranty
- High current binding posts
- Klippel Verified
- CEA-2031
More info
Manufacturer details
The P1-2X10 is a dual P1 10” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.
Additional details
The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2 & P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.
Technologies
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has
Specs
Specifications
10
| Nominal Impedance (ea) | 2-Ohm Internally wired to create a 2-Ohm amplifier load |
| Power Handling (Watts RMS) | 500 Watts RMS 1000 Watts Max |
| Enclosure Material | 5/8" MDF (Medium Density Fiberboard) |
| Woofer Quantity | 2 |
| Woofer Series | Punch P1 (P1S4-10) |
| DimensionsBox (H x W x D)Wedge (H x W x D1 x D2) | 13.125" x 31.125" x 15.125" (33.3cm x 79.1cm x 38.4cm) |
| Woofer Size | 10" |
| Enclosure Type | Vented |
| Speaker Connector | Up to 10 AWG compression terminals |
| Shipping Weight | 63.9 Lbs. (28.98 kg) |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Similar products
Compare nearby options
Rockford Fosgate•Prime
R2-2X10 Prime Dual R2 10" Sealed Loaded Enclosure
4.621 reviews
$459.99CAD
$549.99
In stock
Rockford Fosgate•Prime
R2S-1X10 Prime 10" R2S Shallow Loaded Enclosure
4.766 reviews
$329.99CAD
$389.99
In stock
Rockford Fosgate•Power
T1S2-10P Power 10" T1 Slim 2Ω SVC Subwoofer for Ported Enclosures
$739.99CAD
$879.99
In stock
Rockford Fosgate•Power
T1S2-10S Power 10" T1 Slim 2Ω SVC Subwoofer for Sealed Enclosures
$739.99CAD
$879.99
In stock
Rockford Fosgate•Power
T1D210 Power 10" T1 2-Ohm DVC Subwoofer
5.06 reviews
$689.99CAD
$809.99
In stock
Rockford Fosgate•Punch
P3D2-10 Punch 10" P3 2-Ohm DVC Subwoofer
5.043 reviews
$349.99CAD
$419.99
In stock
Rockford Fosgate•Punch
P3SD2-10 Punch 10" P3S Shallow 2-Ohm DVC Subwoofer
4.849 reviews
$329.99CAD
$389.99
In stock
Cerwin Vega
XED10V2 XED Series 10” SVC Subwoofer (4Ω)
$135.99CAD
In stock