The review excerpts provided mostly describe Rockford Fosgate Punch 15" subwoofers, not the 1" tweeter kit. Those excerpts praise very deep, loud, and punchy bass and good value, but include a few reports of unit failures under heavy power. The comments may not reflect this tweeter kit's performance.
Buyer confidence
79%Highlights
- Butyl midrange rubber surround
- Recessed tweeter mount uses standard 1-3/4" hole saw
- Sold in pairs (2 each)
- 1 Year Warranty
Key specs
Full specs- Speaker Type
- Tweeter
- Nominal Impedance (Ohms)
- 4-Ohm
- Tweeter Size (Nominal Diameter)
- 1.0" (25.4 mm)
- Midrange Size (Nominal Diameter)
- —
- Midrange Mounting Diameter
- —
- Tweeter Mounting Depth
- 0.50" (13 mm)
- Midrange Mounting Depth
- —
- Power Handling (RMS)
- 60 Watts RMS 120 Watts Max
Key specs
Full specs- Speaker Type
- Tweeter
- Nominal Impedance (Ohms)
- 4-Ohm
- Tweeter Size (Nominal Diameter)
- 1.0" (25.4 mm)
- Midrange Size (Nominal Diameter)
- —
Highlights
Overview- Butyl midrange rubber surround
- Recessed tweeter mount uses standard 1-3/4" hole saw
- Sold in pairs (2 each)
Review highlights
Based on customer reviewsPunch 1" Series Tweeter Kit (pr) — supplied reviews appear to reference Punch 15" subs
The review excerpts provided mostly describe Rockford Fosgate Punch 15" subwoofers, not the 1" tweeter kit. Those excerpts praise very deep, loud, and punchy bass and good value, but include a few reports of unit failures under heavy power. The comments may not reflect this tweeter kit's performance.
What buyers praise
- Reviewers report very deep, chest‑thumping bass
- Consistently described as loud and punchy even with modest amplification
What to watch for
- Most excerpts reference a 15" subwoofer rather than the 1" tweeter kit — these reviews may not reflect the tweeter kit’s behavior or fit
Overview
A 1" PEI dome tweeter kit from Rockford Fosgate, the P1T-S is rated 60 Watts RMS and includes high-pass crossovers, mounting hardware and three bezels for multiple mounting options.
Best for
- Car audio enthusiasts upgrading factory tweeters
- Custom installs that need flexible mounting (flush, surface, angled)
- Systems requiring outboard high-pass crossovers
Key points
- 1" (25 mm) PEI dome tweeter for clear high-frequency response
- Rated 60 Watts RMS power handling
- Includes high-pass crossovers (outboard)
- Three bezels for flush, surface and angled mounting configurations
- Includes mounting hardware; sold as a pair
- Technologies: DDC™ Tweeter Mounting, CTA-2031, Klippel Verified
Fit and use
Sold in pairs and intended as component tweeters for vehicle audio systems. Choose one of the three bezels for flush, surface or angled mounting. Use the supplied high-pass crossovers to integrate the tweeters with the rest of the system and to protect them from low-frequency content.
What to know
This is a tweeter kit (high-frequency driver) and requires wiring and integration with a compatible audio system. Confirm your system's power handling and crossover settings before installation. The kit includes bezels and mounting hardware but does not specify vehicle-specific fitment.
Key features
- Butyl midrange rubber surround
- Recessed tweeter mount uses standard 1-3/4" hole saw
- Sold in pairs (2 each)
- 1 Year Warranty
- DDC™ Tweeter Mounting
- CTA-2031
- Klippel Verified
More info
Manufacturer details
The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware and three bezels for flush, surface and angle configurations. Sold in pairs (2 each).
Additional details
Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool looking outboard crossover, and 3 mounting bezels to accomodate various installations.
Technologies

DDC™ Tweeter Mounting
Every aspect of our new DDC™ Tweeter design has been completely re-engineered to allow for maximum ease of

CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has

Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
Specs
Specifications
| Speaker Type | Tweeter |
| Nominal Impedance (Ohms) | 4-Ohm |
| Tweeter Size (Nominal Diameter) | 1.0" (25.4 mm) |
| Midrange Size (Nominal Diameter) | — |
| Midrange Mounting Diameter | — |
| Tweeter Mounting Depth | 0.50" (13 mm) |
| Midrange Mounting Depth | — |
| Power Handling (RMS) | 60 Watts RMS 120 Watts Max |
| Crossover | High-Pass (HP): 3.5KHz @ 12dB/octave Butterworth |
| Frequency Response (Hz) | 3.5kHz - 22kHz |
| Sensitivity (dB @ 1W/1M) | 90 |
| Grille/Trim Ring Included | Yes |
| Mounting Hardware | Yes |
| Shipping Weight | 1.2 Lbs. (0.54 kg.) |
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Similar products









