Discontinued

Punch Series • 500W RMS • 1 Ohm

The P3-1X10 is a single P3 10” vented enclosure with 500 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Punch Series • 1000W RMS • 1 Ohm

The P3-2X10 is a dual P3 10” vented enclosure with 1000 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

Punch Series • 300W RMS

The Punch P300-1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300-1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.

Punch Series • 300W RMS

If space is limited in your vehicle but you don’t want to sacrifice performance, the P3001 is the amplifier for you. Small enough to fit nearly any install with the power to add some PUNCH to your subwoofers!

Punch Series • 300W RMS

The Punch P300-2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300-2 amplifier is great with full-range or component systems or can be bridged for use with 1 or 2 subwoofers.

Punch Series • 300W RMS

Rockford Fosgate's P3002 is a very capable amplifier for a variety of install situations. A superb choice whether you’re looking to power coaxials, components or a four-ohm SVC subwoofer.

Punch Series • 400W RMS • Dual 2 Ohm

(2004-2006) 10" Punch P3 2Ω dual voice coil subwoofer rated to handle 400 Watts RMS. The 1st generation subwoofer to utilize the P3 family name.• Model replaced by P3D210

Punch Series • 400W RMS • Dual 4 Ohm

(2004-2006) 10" Punch P3 4Ω dual voice coil subwoofer rated to handle 400 Watts RMS. The 1st generation subwoofer to utilize the P3 family name.• Model replaced by P3D410

Punch Series • 500W RMS • Dual 2 Ohm

(2004-2006) 12" Punch P3 2Ω dual voice coil subwoofer rated to handle 500 Watts RMS. The 1st generation subwoofer to utilize the P3 family name.• Model replaced by P3D212

10" subwoofer grille with cast aluminum ring, mesh screen and polished "Diamond-R" logo on bottom

12" subwoofer grille with cast aluminum ring, mesh screen and polished "Diamond-R" logo on bottom

Punch Series • 500W RMS • Dual 4 Ohm

(2004-2006) 12" Punch P3 4Ω dual voice coil subwoofer rated to handle 500 Watts RMS. The 1st generation subwoofer to utilize the P3 family name.• Model replaced by P3D412

Punch Series • 500W RMS • Dual 2 Ohm

(2004-2006) 15" Punch P3 2Ω dual voice coil subwoofer rated to handle 500 Watts RMS. The 1st generation subwoofer to utilize the P3 family name.• Model replaced by P3D215

15" subwoofer grille with cast aluminum ring, mesh screen and polished "Diamond-R" logo on bottom

Punch Series • 500W RMS • Dual 4 Ohm

(2004-2006) 15" Punch P3 4Ω dual voice coil subwoofer rated to handle 500 Watts RMS. The 1st generation subwoofer to utilize the P3 family name.• Model replaced by P3D415

Punch Series • 325W RMS

If space is limited in your vehicle but you don't want to sacrifice performance, the P325.1 is the amplifier for you. Its small footprint allows it to go where other amplifiers can't, and gives you the PUNCH you're looking for.

Punch Series • 250W RMS • Dual 2 Ohm

(2004-2006) 8" Punch P3 2Ω dual voice coil subwoofer rated to handle 250 Watts RMS. The 1st generation subwoofer to utilize the P3 family name.• No replacement model available :-(

Punch Series • 325W RMS

Rockford Fosgate's P325.2 is a very capable amplifier for a variety of applications, and its small size is easy to integrate into virtually any vehicle. A superb choice whether you're looking to power coaxials, components, or a 4-ohm SVC subwoofer.

Punch Series • 250W RMS • Dual 4 Ohm

(2004-2006) 8" Punch P3 4Ω dual voice coil subwoofer rated to handle 250 Watts RMS. The 1st generation subwoofer to utilize the P3 family name.• No replacement model available :-(

Punch Series • 400W RMS • 4 Ohm

A great looking compact enclosure that will not leave you strapped for cash

Punch Series • 1000W RMS • 4 Ohm

A great looking compact enclosure that will not leave you strapped for cash

Punch Series • 500W RMS • 4 Ohm

A great looking compact enclosure that will not leave you strapped for cash

Punch Series • 800W RMS • 4 Ohm

A great looking compact enclosure that will not leave you strapped for cash

Punch Series • 300W RMS • 4 Ohm

The P3L-S10 is a single 10” shallow enclosure with 300 Watts RMS power handling wired to a 4-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.