Discontinued

Punch Series • 700W RMS

The Punch P700-1bd is a mono amplifier capable of 700 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers.

Punch Series • 800W RMS

With four channels of serious PUNCH power, the P8004 is a great amplifier for high-powered coaxials/components or bridge the rear channels to drive a 2-ohm DVC subwoofer. A capacitor is recommended.

Punch Series • 850W RMS

With four channels of serious PUNCH power, the P850.4 is a great amplifier for high-powered coaxial or component speakers

Punch Series • 850W RMS

Punch 850 Watt 2-channel amplifier with black anodized aluminum sheet metal designed for 2Ω stereo and/or 4Ω bridged/mono loads. • This model replaced by P500-2

8" subwoofer grille with cast aluminum ring, mesh screen and polished "Diamond-R" logo on bottom. Designed to fit Punch P1 & P2 subwoofers. Simply remove existing trim ring and secure 4 screws through existing subwoofer frame. Includes mounting hardware. One (1) grille per package.

Punch Series • 75W RMS

The Punch PBR300X4 is a 300 Watt full-range 4-channel car audio amplifier designed for compact systems. This efficient amp packs a Punch in truck, sub-compact, electric, and hybrid vehicles without sucking a lot of juice from your electrical system.

Punch Series • 150W RMS • 4 Ohm

If you're looking for clean hard-hitting bass but don't want to break the bank, the PL1-112 is your subwoofer

Punch Series • 150W RMS • 4 Ohm

A great looking compact enclosure that won't leave you strapped for cash

Punch Series • 300W RMS • Dual 8 Ohm

Tuned by our good friends at Q Logic using a proprietary low-noise port design, the PL1-210 surely offers a lot of BANG for the buck

Punch Series • 300W RMS • Dual 8 Ohm

For big Rockford Fosgate bass on a budget, it's tough to beat the PL1-212

Punch Series • 200W RMS • 4 Ohm

If you want to maximize your slam to size ratio - look to the PL2-110

Punch Series • 400W RMS • Dual 8 Ohm

A simple subwoofer solution for many different install situations, the PL2-210 is certainly no slouch when it comes to output

Punch Series • 200W RMS • 4 Ohm

Sleek design, quality components and killer Rockford Fosgate bass - perhaps the ultimate combination

Punch Series • 400W RMS • Dual 8 Ohm

The PL2-212 is proof that you don't need a ton of power to achieve great low frequency output

Replacement wired remote level control for 1st generation Prime series amps.

Punch Series • 60W RMS

The PM100X1 is a 100 Watt dynamic power mono amp using DC and AC voltages present on existing radio speaker outputs. This design allows connection to a speaker wire without running a B+ cable. It also presents a safe load to the radio amp circuit to eliminate excessive wear and tear on the radio, making it ideal for OEM and aftermarket radio integration. The conformal coated PCB allows for mobile, motorsport and marine applications. PM100X1K "KIT" ships with 2 pcs. NOTE: This product now being sold as the PM100X1K 2-piece kit

Punch Series • 250W RMS • 4 Ohm

The PM210S4 is a white 10" subwoofer designed for marine watercraft or powersports applications. It features a stainless steel sport grille and is UV and moisture resistant. Can be used in sealed, vented or infinite baffle installations. • This model replaced by the M2D2-10S

Punch Series • 250W RMS • 4 Ohm

The PM210SB is a black 10” subwoofer designed for marine watercraft or powersports applications. It features a stainless steel sport grille and is UV and moisture resistant. Can be used in sealed, vented or infinite baffle installations.

Punch Series • 250W RMS • 4 Ohm

The PM210SX is a white 10” subwoofer designed for marine watercraft or powersports applications. It features a color matched luxury grille and is UV and moisture resistant. Can be used in sealed, vented or infinite baffle installations.

Punch Series • 300W RMS • 4 Ohm

The PM212S4 is a white 12” subwoofer designed for marine watercraft or powersports applications. It features a stainless steel sport grille and is UV and moisture resistant. Can be used in sealed, vented or infinite baffle installations.

Punch Series • 300W RMS • 4 Ohm

The PM212SX is a black 12” subwoofer designed for marine watercraft or powersports applications. It features a stainless steel sport grille and is UV and moisture resistant. Can be used in sealed, vented or infinite baffle installations.

Punch Series • 75W RMS • 4 Ohm

The PM262 is a Punch 6" 2-way component system with a coaxially mounted tweeter featuring marine grade weather proofing technologies. Supplied in all white with a stainless steel sport grille. • This model replaced by the m1-6

Punch Series • 75W RMS • 4 Ohm

The PM262B is a Punch 6" 2-way component system with a coaxially mounted tweeter featuring marine grade weather proofing technologies. Supplied in all black with a stainless steel sport grille. • This model replaced by the m1-6

Punch Series • 75W RMS • 4 Ohm

The PM262X is a Punch 6" 2-way component system with a coaxially mounted tweeter featuring marine grade weather proofing technologies. Supplied in all white with a matching luxury grille.