The PMX-8DH is a wired full-function display head designed for use with the PMX-8BB hide-away media receiver.
Buyer confidence
88%Highlights
- IPX6 Marine Grade for prevention of water intrusion
- American Society for Testing and Materials (ASTM): B117 Salt Fog Test Standard, D4329 UV Exposure of Plastics Test Standard
- Wet Bonded Faceplate: An epoxy layer between display and cover glass eliminates air gap to improve visual clarity and preventing dust build-up.
- 5" Full color Thin Film Transistor display
Key specs
Full specs- Speaker Impedance
- No
- Pandora® Internet Radio (Yes/No)
- Yes
- Power Output
- No
- USB Output Current
- 1A
- USB Version
- 2.0 (Firmware Updating Only)
- Bluetooth® (Yes/No)
- Yes 3.0+EDR, A2DP 1.3
- Display Size
- 5” Color TFT
- Device Type
- Digital-Media Display Head
Key specs
Full specs- Speaker Impedance
- No
- Pandora® Internet Radio (Yes/No)
- Yes
- Power Output
- No
- USB Output Current
- 1A
Highlights
Overview- IPX6 Marine Grade for prevention of water intrusion
- American Society for Testing and Materials (ASTM): B117 Salt Fog Test Standard, D4329 UV Exposure of Plastics Test Standard
- Wet Bonded Faceplate: An epoxy layer between display and cover glass eliminates air gap to improve visual clarity and preventing dust build-up.
Overview
The PMX-8DH is a wired full-function display head designed for use with the PMX-8BB hide-away media receiver. It features a 5" ultra-bright color TFT display that is optically wet bonded to the bezel and includes water-resistant controls and a conformal coated PCB for elemental protection.
Best for
- Owners of the PMX-8BB hide-away media receiver seeking a full-function wired display controller
- Marine installations that require a sunlight-readable display
- Systems needing a display with water-resistant controls and protection against dust or moisture
Key points
- 5" ultra-bright color TFT display for improved viewing in full sun
- Display is optically wet bonded to prevent dust and moisture penetration
- IPX6 rated for protection against powerful water sprays
- Water-resistant rotary encoder knob with white LED back-lit buttons
- Front panel illumination and sub controls for quick adjustments
- Composite video input for camera or video sources
Fit and use
Designed specifically to work with the PMX-8BB hide-away media receiver as its wired display controller. Connects using the multi-pin DIN connector and provides full access to the receiver’s capabilities, including composite video input and front panel control.
What to know
This is a wired display head controller that requires the PMX-8BB hide-away media receiver to operate. The screen’s optical wet bonding is intended to reduce dust and moisture penetration. The unit carries an IPX6 rating and includes a conformal coated PCB for added protection. Software updates and support resources a…
Key features
- IPX6 Marine Grade for prevention of water intrusion
- American Society for Testing and Materials (ASTM): B117 Salt Fog Test Standard, D4329 UV Exposure of Plastics Test Standard
- Wet Bonded Faceplate: An epoxy layer between display and cover glass eliminates air gap to improve visual clarity and preventing dust build-up.
- 5" Full color Thin Film Transistor display
- Water resistant rotary encoder volume control
- 2-Year Warranty
- Direct composite video input connection
- Two-piece mounting system to secure panel to mounting surface
- Front Panel Sub Control
- Epoxy coated circuit board for water resistance
- White LED button illumination
- Element Ready™ | Source Units
More info
Manufacturer details
The PMX-8DH, used with the PMX-8BB hide away media receiver is a wired display head controller giving you access to all the receivers capabilities. It features a 5" ultra bright color TFT display for optimum viewing even in full sun that is optically wet bonded to prevent any dust or moisture penetration. It is IPX6 rated and uses a water resistant rotary encoder knob with white LED button illumination. Additionally it features front panel illumination and sub controls, composite video input as well as a conformal coated PCB for elemental protection.
Additional details
Designed for use with the PMX-8BB, the PMX-8DH full function wired display head is the ultimate controller for your digital media system. The unit features a ultra bright 5" TFT display designed and chosen for its viewing ability even in full sunlight. The screen is optically wet bonded to the bezel to prevent any dust or moisture penetration ensuring it stays clean and clear.
Access to the Custom GUI interface is provided through the water resistant rotary encoder knob and white LED back-lit buttons allow you to easily adjust the illumination levels of the panel and provide instant sub level control at your fingertips. The display head also features a composite video input for video or camera systems and easy interconnection to the hide away unit with a multi-pin DIN connector.
The panel is IPX6 rated for water spray intrusion and features a conformal coated PCB circuit board protecting the vital electronics. We further validate the unit with 500 hours of testing under both the ASTM B117 and D4329 testing standards to make sure it will hold up under years of daily use exposed to the elements.
Technologies

Element Ready™ | Source Units
All components are protected against harsh outdoor elements like Dust, UV, Temperature, Water, Corrosion &

Pandora® Internet Radio
Pandora® (also known as Pandora Internet Radio) is a music streaming and automated music recommendation service.

CANbus
CAN (Controller Area Network) bus is a message-based protocol, designed originally for automotive applications,

Made for Android
This device supports the Google "Made for Android" protocol.

Built In Bluetooth®

USB Playback
This source unit supports playback from a USB device.

Made for iPod/iPhone
Made for iPod/iPhone certifies that this product has passed Apple certification for device compatibility.

SiriusXM-Ready®
This radio is ready to accept SiriusXM® satellite programming.
Specs
Specifications
| Speaker Impedance | No |
| Pandora® Internet Radio (Yes/No) | Yes |
| Power Output | No |
| USB Output Current | 1A |
| USB Version | 2.0 (Firmware Updating Only) |
| Bluetooth® (Yes/No) | Yes 3.0+EDR, A2DP 1.3 |
| Display Size | 5” Color TFT |
| Device Type | Digital-Media Display Head |
| SPEAKER OUTPUTS | N/A |
| Speaker Outputs (Yes/No) | No |
| Dimensions (HxWxD) | H5.1" x W8.3" x D0.8" (130mm x 211mm x 20mm) |
| MEDIA PLAYER Audio Format Compatibility | No |
| Operating Voltage | 10.5V - 16V |
| Multi-Zone/Multi-Source (Yes/No) | No |
| FEATURES | N/A |
| Steering Wheel Control Ready(Yes/No) | No |
| AUX Input (Yes/No) | No |
| Video Input | (1) Female RCA Jack |
| Apple®/Android™ Compatible (Yes/No) | No |
| GENERAL | N/A |
| Clock (Yes/No) | No |
| SiriusXM-Ready® (Yes/No) | Yes Requires SXV300 |
| USB Charging (Yes/No) | Yes |
| Included In The Box | (1) PMX-8DH display head (1) PMX10C |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 1 | PMX-8DH | display head |
| 1 | — | PMX10C |
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Compatibility
| MODEL | DESCRIPTION |
|---|---|
| PMX-8BB | Punch Marine Hide-Away AM/FM/WP Digital Media Receiver |
Accessories

PMX-8BB Punch Marine Hide-Away AM/FM/WB Multi-Zone Digital Media Receiver
$1059.99

PMX16C Punch Marine 16 Foot Extension Cable
$109.99

PMX25C Punch Marine 25 Foot Extension Cable
$129.99
Similar products








