The Rockford Fosgate Punch Marine 1,000 Watt Class-bd 5-Channel Amplifier delivers strong, clear performance for speakers and a sub with marine-capable cooling and straightforward connections, though some buyers reported early failures and a few installation/power considerations.
Buyer confidence
79%Highlights
- Marine grade two part epoxy coating on circuit boards
- 2/4 channel input switch
- Muted turn on
- High level input capable with Auto Turn-On circuit
Key specs
Full specs- Number of Channels
- 5
- Total Power (Sum of Rated Power)
- 1000 Watts
- Rated Power (RMS Continuous Power)
- 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm N/A + 500 Watts @ 1-Ohm
- Dynamic Power (PVC/PowerCube®)
- 115 Watts x 4 + 299 Watts x 1 @ 4-Ohms 0° Res 190 Watts x 4 + 540 Watts x 1 @ 2-Ohms 0° Res N/A + 863 Watts x 1 @ 1-Ohm 0° Res
- Bridgeable
- Yes (front/rear channels)
- Frequency Response
- Front/Rear: 20Hz - 20kHz +/-3dB Sub: 20Hz - 500Hz +/-3dB
- Input Sensitivity
- 150 mV - 12 V
- Circuit Topology Class
- Class A/B + Class BD (Sub)
Key specs
Full specs- Number of Channels
- 5
- Total Power (Sum of Rated Power)
- 1000 Watts
- Rated Power (RMS Continuous Power)
- 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm N/A + 500 Watts @ 1-Ohm
- Dynamic Power (PVC/PowerCube®)
- 115 Watts x 4 + 299 Watts x 1 @ 4-Ohms 0° Res 190 Watts x 4 + 540 Watts x 1 @ 2-Ohms 0° Res N/A + 863 Watts x 1 @ 1-Ohm 0° Res
Highlights
Overview- Marine grade two part epoxy coating on circuit boards
- 2/4 channel input switch
- Muted turn on
Review highlights
Based on customer reviewsPowerful marine 5-channel amp with clear sound and reliable cooling
The Rockford Fosgate Punch Marine 1,000 Watt Class-bd 5-Channel Amplifier delivers strong, clear performance for speakers and a sub with marine-capable cooling and straightforward connections, though some buyers reported early failures and a few installation/power considerations.
What buyers praise
- High output for speakers and a sub — reviewers note punchy bass and plenty of power
- Clear vocals and highs for balanced sound
What to watch for
- A few units arrived DOA or developed faults after about a year — reliability reports are mixed
Overview
The PM1000X5 is a 1,000 Watt full-range 5-channel amplifier designed for marine and motorsport use. It combines Class-A/B operation on the front/rear channels with a Class-BD subwoofer channel and a conformal-coated PCB for increased resistance to harsh environments.
Best for
- Full-system installs (front, rear and subwoofer)
- Boats and motorsport applications
- Setups that need efficient power delivery with reduced electrical load
Key points
- 1,000 Watt 5-channel amplifier
- Class-A/B technology on front and rear channels
- Class-BD design for the dedicated subwoofer channel
- Conformal-coated printed circuit board for marine/motorsport durability
- Ultra-efficient design to limit draw on charging/ electrical systems
- Tri-stage protection covering thermal, over-current and short-circuit conditions
Fit and use
Use the front channels for dash or front speakers, the rear channels for back speakers, and the fifth channel for a subwoofer. The amplifier is sized to power an entire system without excessive drain when configured appropriately.
What to know
The unit is built for marine and motorsport environments with a conformal-coated PCB and Element Ready designation. It features tri-stage protection for thermal, over-current and short conditions. For proper configuration, gain setting guidance, safety information and detailed specifications, refer to the manufacturer…
Key features
- Marine grade two part epoxy coating on circuit boards
- 2/4 channel input switch
- Muted turn on
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- Stealth top mounted control panel
- Over current protection
- Short circuit protection
- On-board Punch EQ with +18dB boost @ 45Hz
- 2-Year Warranty
- 12dB/octave Butterworth crossover
Technologies

C.L.E.A.N. Technology
Time and sophisticated test equipment have been replaced, with Rockford’s integrated level setting technology

CTA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your

CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives

Class-BD
Rockford Fosgate bd topology is a revolutionary patented design (#6,097,249), integrating a technology that is

Element Ready™ | Amps
All components are protected against harsh outdoor elements like Dust, UV, Temperature, Water, Corrosion &
TRANS•ana
An award winning studio quality circuit borrowed from the pro audio company Hafler. TRANS-ana is a sound quality
Balanced Differential Inputs
Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts
DSM
DSM - An industry-leading manufacturing process, DSM utilizes high-speed robotics, high-quality 1% tight-tolerance

MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life
Showing the main technologies for this product.
Specs
Specifications
| Number of Channels | 5 |
| Total Power (Sum of Rated Power) | 1000 Watts |
| Rated Power (RMS Continuous Power) | 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm N/A + 500 Watts @ 1-Ohm |
| Dynamic Power (PVC/PowerCube®) | 115 Watts x 4 + 299 Watts x 1 @ 4-Ohms 0° Res 190 Watts x 4 + 540 Watts x 1 @ 2-Ohms 0° Res N/A + 863 Watts x 1 @ 1-Ohm 0° Res |
| Bridgeable | Yes (front/rear channels) |
| Frequency Response | Front/Rear: 20Hz - 20kHz +/-3dB Sub: 20Hz - 500Hz +/-3dB |
| Input Sensitivity | 150 mV - 12 V |
| Circuit Topology Class | Class A/B + Class BD (Sub) |
| Efficiency (average) | Front/Rear: 66% @ 4-Ohm Sub Channel: 80% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise) | <1.0% |
| Signal Input | Input Switch: Hi/Low level input Input Switch: 2/4 channel input Hi/Low Level: 3 RCA Pair Sub: front/sub input switch |
| Signal Output | - |
| Tone Controls | Sub: 0dB to +18dB @ 45Hz |
| Crossover Controls | Front: 50Hz - 250Hz High-Pass @ 12dB/Octave Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave Sub: 50Hz - 250Hz Low-Pass Sub: 28Hz infrasonic filter @ 12dB/Octave |
| Remote Controls | Optional Punch Level Control (PLC2) Ready |
| Visual Indicators | Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
| Power Wire Gauge | 4 AWG |
| Power Input Connector | Block |
| Speaker Wire Gauge | 12 AWG |
| Speaker Output Connector | Block |
| Cooling | Convection |
| Operating Voltage | 9 - 16 VDC |
| Recommended Fuse (not included) | 150 A |
| Average Current Draw (13.8V Music) | 75 A |
| Max. Current Draw (13.8V Sinewave) | 150 A |
| Suggested Alternator | 100 A |
| Dimensions (H x W x D) | 2.38 x 7.76 x 15.03 (in) 6.05 x 19.71 x 38.18 (cm) |
| Shipping Weight | 15.3 Lbs. (6.93 Kg.) |
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Installation resources
Wiring diagrams
Accessories

RFK1D Dual Amp 1/0 AWG Dual Amp Wiring Kit
$829.99

RFK4X 4 AWG Complete Installation Kit
$319.99

RFK4I 4 AWG Power & Signal Installation Kit
$349.99

RFK4 4 AWG Power Installation Kit
$239.99

PLC2 Remote Punch Level Control
$79.99

RFI2SW Speaker Line To Male RCA Adapter
$29.99

RFDB4 4 AWG Positive/Negative Battery Terminal
$49.99
Similar products












