Accessories

The PMX-BTUR is a universal Bluetooth® remote control designed for use with any audio system that utilizes a mobile device (phone) as a source having Bluetooth® connectivity. Adjust Volume, Track, Play, and Pause on Android® or Apple® mobile devices. The Bluetooth® 4.0 Smart Ready receiver quickly and easily pairs with your mobile device using an easy one-button pairing control. Also compatible directly with the PMX-1 source unit. Can be used for hand-held or steering wheel applications using included bezel and Velcro strap. Designed for Mobile, Marine, Motorsport and Motorcycle applications.

Was $259.99

The PMX-USBP is a universal port for SXS and Marine applications that extend the USB input on Rockford Fosgate source units. It features a hinged cover to protect against water and dust intrusion. The USB input port can be used to charge your mobile device, play audio from your mobile device or USB jump drive, and update firmware on your source unit (functionality based upon supported features of source unit.)

Was $99.99

The RFBTRCA is a universal Bluetooth receiver for wireless audio streaming and features RCA outputs for easy connection to an audio system.

Was $129.99

Purpose built exclusively for the Polaris® and Can-Am® X3 models.

Was $159.99

The PMX-ANT is an amplified antenna for use with Rockford Fosgate PMX source units to boost radio signals in distant areas.

Was $149.99

Purpose built exclusively for Polaris® RZR models, this backup camera mounts in the existing factory location.

Was $159.99

The PMXYC Y-adaptor allows installation of two remote controls with one source unit.

Was $99.99

The PMX25C is a 25-foot extension cable for the PMX-1R or PMX-0R.

Was $129.99

Prime Series

The new 2nd generation 10" subwoofer enclosure is Color Optix™ Ready for systems utilizing M1 and M2 series subwoofers. The newer roto-molded composite blend is lighter in weight and designed to directly fit select RANGER model vehicles. New Vented design produces louder output over previous Gen-1 model. Includes vent cap to create sealed enclosure for tighter response or when submerging your UTV. Subwoofer enclosure fits under the front or rear passenger seat where the 5-gallon bucket emboss is located. Designed for use with M1/M2 series 10" woofers. Kit includes all needed hardware for the installation.Refer to our COMPATIBILITY chart to verify fitment before purchasing.

Was $899.99

Rear speaker harness for adding PM2652W-MB or RM1652W-MB. NOTE: Speakers also require PM-CL3B bracket kit.

Was $149.99

Purpose built exclusively for Can-Am® Maverick X3 models, this backup camera mounts in the existing factory location.

Was $159.99

The PM-CL3B is a black marine grade cast aluminum clamp designed for use with the Polaris RANGER and GENERAL along with the PM2652W-MB and RM1652W-MB enclosed speakers.

Was $529.99

The PMX16C is a 16-foot extension cable for the PMX-1R or PMX-0R.

Was $109.99

The PMX50C is a 50-foot extension cable for the PMX-1R or PMX-0R.

Was $219.99

Prime Series

Front subwoofer enclosure for select Rockford Fosgate 10" subwoofers with mounting bracket.

Was $889.99

Amp wiring harness for select Polaris GENERAL™ models.

Was $429.99

Rear speaker harness, when adding PM2652W-MB or RM1652W-MB. Requires RFRNGR-K8 complete wire kit for installation. Mini wake speakers require PM-CL3B bracket.

Was $149.99

Purpose built exclusively for Polaris® Ranger models, this backup camera mounts in the factory location.

Was $179.99

Audio interface designed for use with Polaris® vehicles equipped with Ride Command®. Allows Polaris® Ride Command® to function as your source unit. Uses Rockford Fosgate engineered circuitry to eliminate turn-on pop common with all Ride Command® units and noise in UTVs equipped with DYNAMIX suspension caused by switching between Firm, Sport, and Comfort modes. Compatible with all Polaris® RZR®, GENERAL™, and RANGER® models equipped with Ride Command®

Was $309.99

500W RMS • 2 Ohm

Purpose built exclusively for the Can-Am® MAVERICK X3 MAX, this rear subwoofer kit provides next level bass performance, an Element Ready™ design, and simple installation.

Was $3419.99

This updated amplifier bracket is designed for 2023 and newer Polaris Ranger XP 1000 and Ranger Crew XP 1000 models, across all trim levels. This bracket relocates the under-hood factory equipped RIDE COMMAND+ module, making way for easy installation of the amplifier. Built to optimize space under the hood while maintaining functionality and durability, this bracket is the must-have for 2023 and newer compatible models. Amplifier and RGB controller are not included as they come packaged with the RNGR18-STGx and RNGR18RC-STGx audio kits. Element Ready™: Purpose built for the off-road environment, Rockford’s Element Ready™ products are built to stand up to water, dirt, mud and UV rays, making sure all your audio components perform regardless of the conditions. Compatibility: Please review below chart for fitment before purchasing.

Audio interface designed for use with Polaris® vehicles equipped with Ride Command®. Allows Polaris® Ride Command® to function as your source unit. Uses Rockford Fosgate engineered circuitry to eliminate turn-on pop common with all Ride Command® units and noise in UTVs equipped with DYNAMIX suspension caused by switching between Firm, Sport, and Comfort modes. Compatible with all Polaris® RZR®, GENERAL™, and RANGER® models equipped with Ride Command®

Was $299.99

Amp kit mounting plate for select RANGER® models.

Was $429.99

Rear speaker harness for select YXZ® models.

Was $129.99