1 / 5

Rockford Fosgate Prime R2SD4-12Prime 12" R2S 4-Ohm DVC Shallow Subwoofer

Variants

12" 4Ω DVC12" 4Ω DVC2 variants

The Rockford Fosgate Prime R2SD4-12 is a 12" shallow subwoofer designed for installations with limited mounting depth. It delivers 250 Watts RMS and uses a 4‑Ohm dual voice coil for versatile wiring options.

Highlights

  • 1 Year Warranty
  • StampCast basket with integrated spider venting
  • Mica reinforced polypropylene cone
  • Integrated PVC trim ring

Key specs

Full specs
Nominal Impedance
Dual 4-Ohm
Shipping Weight
12.013 Lbs. (5.44 kg.)
Speaker Connector
Dual 12 AWG compression
Voice Coil Diameter
2" (50 mm)
Power Handling (Watts RMS)
250 Watts RMS 500 Watts Max
Size
12"
Mounting Depth
3.602 in. (91 mm)
SPL (dB @ 1w/1m)
85

Key specs

Full specs
Nominal Impedance
Dual 4-Ohm
Shipping Weight
12.013 Lbs. (5.44 kg.)
Speaker Connector
Dual 12 AWG compression
Voice Coil Diameter
2" (50 mm)

Highlights

Overview
  • 1 Year Warranty
  • StampCast basket with integrated spider venting
  • Mica reinforced polypropylene cone
Overview

The Rockford Fosgate Prime R2SD4-12 is a 12" shallow subwoofer designed for installations with limited mounting depth. It delivers 250 Watts RMS and uses a 4‑Ohm dual voice coil for versatile wiring options.

Best for

  • Installations with limited mounting depth
  • Systems that use sealed enclosures
  • Setups needing flexible wiring options via a dual voice coil

Key points

  • 12" shallow driver that reduces required mounting depth via an elevated motor structure
  • 250 Watts RMS power handling
  • 4‑Ohm dual voice coil (DVC) for multiple wiring configurations
  • Mica-injected polypropylene cone for controlled low-frequency response
  • Stamp-cast basket with spider venting to help keep the motor cool
  • Optimized for sealed enclosure performance

Fit and use

Fits tight spaces where a standard-depth subwoofer won't. Use sealed enclosures for which the driver is optimized. The dual voice coil allows series/parallel wiring choices to match amplifier impedance and system needs.

What to know

Rated for 250 Watts RMS — match amplifier power and impedance to the subwoofer's ratings. Dual voice coil wiring changes overall impedance; verify compatibility with the amplifier before wiring. Shallow profile eases installation in constrained locations but does not change the need for an appropriate enclosure volume…

Highlights

Key features

  • 1 Year Warranty
  • StampCast basket with integrated spider venting
  • Mica reinforced polypropylene cone
  • Integrated PVC trim ring
  • Shallow Motor Assembly
  • Optimized for sealed enclosures
  • Linear spider with embedded 16 AWG tinsel leads
  • Anodized aluminum voice coil former
  • 12 AWG compression terminals
  • Stitched Tinsel Leads
  • Klippel Verified
  • Anodized Aluminum Voice Coil Former
More info

Manufacturer details

When you have no space for bass, our Prime R2SD4-12 shallow subwoofer will satisfy your need. This 12” subwoofer handles 250 Watts RMS and the 4-Ohm Dual Voice Coil design lets you to wire them in various configurations.

Additional details

When you have no space for bass, our R2 12" shallow subwoofer can help satisfy your need for low frequency music. These drivers can fit in tight spaces due to an elevated motor structure that reduces speaker depth. Mica injected polypropylene cones make sure bass notes are clean and accurate. Stamp-cast baskets feature spider venting typically reserved for traditional depth mounted models to keep the motor cool! These shallow subwoofers are optimized for sealed enclosures.

Technologies
Stitched Tinsel Leads

Stitched Tinsel Leads

Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and

Klippel Verified

Klippel Verified

To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be

Anodized Aluminum Voice Coil Former

Anodized Aluminum Voice Coil Former

Two things generally happen when voice coils heat-up. They can generate heat close to the melt-down temp of their

CEA-2031

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has

Specs

Specifications

24
Nominal ImpedanceDual 4-Ohm
Shipping Weight12.013 Lbs. (5.44 kg.)
Speaker ConnectorDual 12 AWG compression
Voice Coil Diameter2" (50 mm)
Power Handling (Watts RMS)250 Watts RMS 500 Watts Max
Size12"
Mounting Depth3.602 in. (91 mm)
SPL (dB @ 1w/1m)85
Fs (Hz)30.3
Cutout Diameter11.25 in. (285 mm)
Xmax (mm)10
Xmax (mm)10
Qts0.65
Qes0.72
Qms7.00
Magnet Weight (oz)51 oz. (1.45 kg.)
Vas (Liters)65.4
Woofer Displacement0.039 cu. ft. (1.1 Liters)
Re (Ohms)6.80
Le (mH)4.2
Subwoofer TypeShallow
Voice Coil TypeDual Voice Coil
Sealed Box Volume (Vb)0.9 cu. ft. (25.4 Liters)
Vented Box Volume (Vb)1.79 cu. ft. (50.6 Liters)
Reviews (0)

No average rating yet

0 reviews

No written reviews are live yet. Signed-in customers can submit one below.

Own this product?

Share installation notes, sound quality feedback, and fitment tips. Customer reviews are saved in the same database and go live after moderation.

Checking account status...

No written reviews are live for this item yet.

Installation resources

Wiring diagrams

9
Wiring Diagram #1

Wiring Diagram #1

Source: Rockford Fosgate

Wiring Diagram #2

Wiring Diagram #2

Source: Rockford Fosgate

Wiring Diagram #3

Wiring Diagram #3

Source: Rockford Fosgate

Wiring Diagram #4

Wiring Diagram #4

Source: Rockford Fosgate

Wiring Diagram #5

Wiring Diagram #5

Source: Rockford Fosgate

Wiring Diagram #6

Wiring Diagram #6

Source: Rockford Fosgate

Wiring Diagram #7

Wiring Diagram #7

Source: Rockford Fosgate

Wiring Diagram #8

Wiring Diagram #8

Source: Rockford Fosgate

Wiring Diagram #9

Wiring Diagram #9

Source: Rockford Fosgate

Box Advisor
Sealed Enclosure diagram

Sealed Enclosure

Recommended volume
0.9 cu ft
Volume range
0.75 cu ft to 1.25 cu ft
Dimensions
20 in W x 16.75 in H x 7 in D
F3
44.1 Hz
Qtc
1.06
Port / ID
48 in
Subwoofer size
50 in
Impedance
4 ohm
Power handling (RMS)
250 W
Vented Enclosure diagram

Vented Enclosure

Recommended volume
1.79 cu ft
Volume range
1.5 cu ft to 2 cu ft
Dimensions
20.5 in W x 16.5 in H x 13 in D
F3
34.4 Hz
Tuning (Fb)
40 Hz
Port / ID
50 in
Subwoofer size
50 in
Impedance
4 ohm
Power handling (RMS)
250 W
Open official Box Advisor
Support

Knowledge Base Articles

  • No Knowledge Base articles

Show all Knowledge Base topics

Ask Our Experts

Return Authorization

If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.



Popular Questions

No FAQs available

Accessories