1 / 9
Rockford Fosgate T1S1-10Power 10" T1 Slim Single 1-Ohm Subwoofer
Variants
10" 1Ω SVC
The Power T1S1-10 is a slimline 10" subwoofer designed for spaces where traditional sized woofers will not fit. Features a single 1-ohm voice coil for simplified wiring configurations. Sold individually (1 each).
Highlights
- 1 Year Warranty
- Dual Nomex progressive spiders with stitched tinsel leads
- Diecast aluminum frame with integrated heat sink fins
- Custom 10 AWG slot loaded brass push spring terminals with corrosion resistant tin plating
Key specs
Full specs- Size
- 10"
- Fs (Hz)
- 42
- Subwoofer Type
- Shallow
- Sd (cm2)
- 356
- Le (mH)
- 0.28
- Nominal Impedance
- 1Ω
- Re (Ohms)
- 0.9
- Vas (Liters)
- 13.1
Key specs
Full specs- Size
- 10"
- Fs (Hz)
- 42
- Subwoofer Type
- Shallow
- Sd (cm2)
- 356
Highlights
Overview- 1 Year Warranty
- Dual Nomex progressive spiders with stitched tinsel leads
- Diecast aluminum frame with integrated heat sink fins
Overview
The Power T1S1-10 is a slimline 10" subwoofer designed for spaces where traditional sized woofers will not fit. Features a single 1-ohm voice coil for simplified wiring configurations. Sold individually (1 each).
Dual Spiders – The voice coil carrier features a asymmetric aligned 2-spider design to deliver enhanced bass response. Each spider works together to handle a range of low-end notes, ensuring you never miss any bass hits in your music.
Perfect Fit – Available in multiple options, including sealed and ported options, these subwoofers make it easy to find the perfect fit for any installation, no matter the space.
Highlights
Key features
- 1 Year Warranty
- Dual Nomex progressive spiders with stitched tinsel leads
- Diecast aluminum frame with integrated heat sink fins
- Custom 10 AWG slot loaded brass push spring terminals with corrosion resistant tin plating
- Dual wound 2.5" CCA voice coil with interior/exterior windings
- Optimized for sealed enclosures
- Vented pole piece
- High temp, high energy Neodymium motor structure
- Injection molded foam surround with VAST™
- Optional protective grille insert available
- Linear Carbon Fiber/PMI/Glass Fiber cone with aluminum dustcap
- Detachable die cast aluminum trim ring
More info
Need bass but don't have a lot of space? How about more power handling than your average shallow subwoofer? Well, the T1 "Slimline" subwoofers are not your average shallow, in fact, they have been painstakingly designed to near exact performance characteristics of traditional sized Power T1 subwoofers you're already familiar with.
We're calling these "slim" subwoofers because they don't take a lot of depth and offer bass response similar to a traditional sized model. How can this be true? Well, let's just say the Wizards-of-Fos engineered an ingenious slotted voice coil assembly that exhibits long excursion travel. Don't worry, you don't need to understand how it works, you just have to listen to how awesome they sound!
Technologies
Patent: 9,008,348
SYMS
The unique motor structure design allows full excursion capabilities of the woofers voice coil while allowing ...
FlexFit Basket - Subwoofer
The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized
Patent: Patent Pending
VAST Surround - Subs
Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and
Anodized Aluminum Voice Coil Former
Two things generally happen when voice coils heat-up. They can generate heat close to the melt-down temp of their
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
Inductive Damping Heat Sink
Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has
Patent: 9,025,809
EVCC
Our EVCC (Encapsulated Voice Coil Coupling) technology connects to the woofers voice coil from both the ...
Specs
Specifications
25
| Size | 10" |
| Fs (Hz) | 42 |
| Subwoofer Type | Shallow |
| Sd (cm2) | 356 |
| Le (mH) | 0.28 |
| Nominal Impedance | 1Ω |
| Re (Ohms) | 0.9 |
| Vas (Liters) | 13.1 |
| Qms | 9.43 |
| Qes | 1.05 |
| Qts | 0.95 |
| SPL (dB @ 1w/1m) | 82 |
| Voice Coil Type | Single Voice Coil |
| SPL (dB @ 2.8v/1m) | 85 |
| Power Handling (Watts RMS) | 500 Watts RMS 1000 Watts Max |
| Xmax (mm) | 15 |
| Speaker Connector | 10 AWG slot loaded |
| Mounting Depth | 3.01 in. (76.5 mm) |
| Magnet Weight (oz) | 15.1 oz. (0.43 Kg) |
| Cutout Diameter | 9.13 in. (232 mm) |
| Voice Coil Diameter | 2.28" (58 mm) |
| Shipping Weight | 9.6 Lbs. (4.3 Kg.) |
| Woofer Displacement | 0.028 cu. ft. (0.82 Liters) |
| Sealed Box Volume (Vb) | 0.8 cu. ft. (22.6 Liters) |
| Vented Box Volume (Vb) | 1.5 cu. ft. (42.4 Liters) |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Installation resources
Wiring diagrams
7
Wiring Diagram #1
Source: Rockford Fosgate
Wiring Diagram #2
Source: Rockford Fosgate
Wiring Diagram #3
Source: Rockford Fosgate
Wiring Diagram #4
Source: Rockford Fosgate
Wiring Diagram #5
Source: Rockford Fosgate
Wiring Diagram #6
Source: Rockford Fosgate
Wiring Diagram #7
Source: Rockford Fosgate
Box Advisor
Sealed Enclosure
- Recommended volume
- 0.8 cu ft
- Volume range
- 0.5 cu ft to 1 cu ft
- Dimensions
- 18 in W x 12 in H x 9.5 in D
- F3
- 40.3 Hz
- Qtc
- 1.1
- Port / ID
- 17 in
- Subwoofer size
- 17 in
- Impedance
- 8 ohm
- Power handling (RMS)
- 500 W
Vented Enclosure
- Recommended volume
- 1.5 cu ft
- Volume range
- 1.25 cu ft to 1.75 cu ft
- Dimensions
- 20 in W x 12 in H x 15 in D
- F3
- 30 Hz
- Tuning (Fb)
- 40 Hz
- Port / ID
- 17 in
- Subwoofer size
- 17 in
- Impedance
- 8 ohm
- Power handling (RMS)
- 500 W
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
