Audison

#AP6.5OHM2

AP6.5OHM2AP6.5OHM2 Amplifier

2 impedance, to fully exploit the 65 W power per channel at 2 of the AP8.9 bit amplifier. 75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range.

Highlights

  • 2 impedance, to fully exploit the 65 W power per channel at 2 of the AP8.9 bit amplifier.
  • 75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range.
  • 25 mm mobile voice coil to maximize efficiency achieving 95 dB.
  • 10 mm winding height mobile voice coil to increase maximum linear excursion up to 2,8 mm and minimize distortion, even at high listening levels.

Key specs

Full specs
Nominal diameter
165 mm (6.5 in)
Impedance
2 Ohm
Power Handling - Peak
210 W
Power Handling - Continuous
70 W
Sensitivity
95 dB
Frequency Response
60 ÷ 5k Hz
Voice Coil Ø
25 mm
Magnet size D x d x h
85 x 32 x 15 mm

Key specs

Full specs
Nominal diameter
165 mm (6.5 in)
Impedance
2 Ohm
Power Handling - Peak
210 W
Power Handling - Continuous
70 W

Highlights

Overview
  • 2 impedance, to fully exploit the 65 W power per channel at 2 of the AP8.9 bit amplifier.
  • 75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range.
  • 25 mm mobile voice coil to maximize efficiency achieving 95 dB.
Overview
  • 2 impedance, to fully exploit the 65 W power per channel at 2 of the AP8.9 bit amplifier.
  • 75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range.
  • 25 mm mobile voice coil to maximize efficiency achieving 95 dB.
  • 10 mm winding height mobile voice coil to increase maximum linear excursion up to 2,8 mm and minimize distortion, even at high listening levels.
  • Water-repellent treated paper cone, featuring profile developed with FEM simulation technology and optimized with the Klippel Scan Vibrometer.
  • Reduced mounting depth, providing ease of installation in OEM placements.
  • TPU (Thermoplastic Polyurethane) surround, featuring the exclusive “Triple Wave” shallow profile, for maximum excursion linearity.
  • Compact basket, protected by abrasion-resistant and scratch-proof coating. Damping epoxy glue provides perfect coupling with the motor system.
  • High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature resistant plastic cover, protecting it against accidental short circuits.
  • Developed with the KLIPPEL suite.
  • AP 6.5 ohm2 woofer has been developed with 2 ohm nominal impedance with the purpose of exploiting all the power made available by the AP8.9 bit amplifier capable of 65W into a 2 ohm load. To maximize the woofer efficiency achieving 95 dB, a 25 mm diameter 10 mm winding height coil, so a more lightweight coil, has been employed, at the same time also providing a linear excursion 2.8 mm higher than the one of AP 6.5 (4 ohm), therefore ensuring high SPL values with minimum distortion even at high listening levels. To extend the woofer’s frequency range down to low frequencies up to 50 Hz a 75 Hz resonance frequency has been chosen, achieving excellent low frequency output even without the use of a subwoofer.
Highlights

Key features

  • 2 impedance, to fully exploit the 65 W power per channel at 2 of the AP8.9 bit amplifier.
  • 75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range.
  • 25 mm mobile voice coil to maximize efficiency achieving 95 dB.
  • 10 mm winding height mobile voice coil to increase maximum linear excursion up to 2,8 mm and minimize distortion, even at high listening levels.
  • Water-repellent treated paper cone, featuring profile developed with FEM simulation technology and optimized with the Klippel Scan Vibrometer.
  • Reduced mounting depth, providing ease of installation in OEM placements.
  • TPU (Thermoplastic Polyurethane) surround, featuring the exclusive “Triple Wave” shallow profile, for maximum excursion linearity.
  • Compact basket, protected by abrasion-resistant and scratch-proof coating. Damping epoxy glue provides perfect coupling with the motor system.
  • High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature resistant plastic cover, protecting it against accidental short circuits.
  • Developed with the KLIPPEL suite.
Specs

Technical Specs

10
Nominal diameter165 mm (6.5 in)
Impedance2 Ohm
Power Handling - Peak210 W
Power Handling - Continuous70 W
Sensitivity95 dB
Frequency Response60 ÷ 5k Hz
Voice Coil Ø25 mm
Magnet size D x d x h85 x 32 x 15 mm
Xmax2.8 mm (0.11 in)
Driver Displacement Volume95 l (3.355 ft)

Electric-acoustic Specs

10
Re2.1 Ohm
Fs75 Hz
Le0.15 mH
Vas8.5 l (0.3 ft)
Mms10.5 g (0.37 oz)
Cms0.4 mm/N
BL3.8 T•m
Qts0.63
Qes0,73
Qms4.8

General

1
Weight0.78 kg

Dimensions

4
Dimension A165 mm (6.5 in)
Dimension B141 mm (5.55 in)
Dimension C77.3 mm (3.04 in)
Dimension D58.5 mm (2.3 in)
Reviews (0)

No average rating yet

0 reviews

No written reviews are live yet. Signed-in customers can submit one below.

Own this product?

Share installation notes, sound quality feedback, and fitment tips. Customer reviews are saved in the same database and go live after moderation.

Checking account status...

No written reviews are live for this item yet.

Support