P2V2-65HOPunch P2 6.5” 2-Way High-Output Convertible Speakers
Variants
The Rockford Fosgate P2V2-65HO is for shoppers who want more flexibility than a basic 6.5-inch coaxial replacement.
Highlights
- I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
- 2Ω High Output (HO) version for direct OEM replacement
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
Key specs
Full specs- Speaker Type
- Convertible
- Midrange Size (Nominal Diameter)
- 6.5"
- Tweeter Size (Nominal Diameter)
- 3/4" (19mm)
- Piezo Size (Nominal Diameter)
- —
- Nominal Impedance (Ohms)
- 2Ω
- Frequency Response (Hz)
- 49Hz - 25kHz
- Voice Coil Diameter (in/mm)
- 1.25" (32.5 mm)
- Crossover
- Tweeter High-Pass: 9kHz @ 6dB/octave (internal) Tweeter High-Pass: 9kHz @ 12dB/octave (external) Tweeter Attenuation: 0dB or -3dB (external)
Key specs
Full specs- Speaker Type
- Convertible
- Midrange Size (Nominal Diameter)
- 6.5"
- Tweeter Size (Nominal Diameter)
- 3/4" (19mm)
- Piezo Size (Nominal Diameter)
- —
Highlights
Overview- I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
- 2Ω High Output (HO) version for direct OEM replacement
- Updated mounting flanges for direct fitment in new vehicles
Overview
The Rockford Fosgate P2V2-65HO is for shoppers who want more flexibility than a basic 6.5-inch coaxial replacement. The convertible Punch P2 design can be configured for coaxial-style installs or a separated component-style layout, making it useful for vehicles with factory tweeter locations or custom front-stage plans.
Best for
- Factory speaker upgrades where a 6.5-inch high-output speaker is the right size.
- Vehicles that may use either a coaxial install or separate tweeter placement.
- Systems where a 2-ohm speaker choice and amplifier or radio compatibility need to be checked.
Key points
- 6.5-inch Punch P2 high-output convertible speaker system.
- Can be configured as a coaxial or component-style setup.
- 2-ohm nominal impedance for higher-output OEM replacement planning.
- Rated at 75 watts RMS and 150 watts peak.
- Frequency response is listed at 49 Hz to 25 kHz, with 2.5-inch mounting depth when using the motor cover.
Fit and use
Check factory speaker size, tweeter location, mounting depth, grille clearance, and amplifier compatibility before ordering. The 2-ohm design can be useful in some factory replacement scenarios, but it should still be matched to the equipment powering the speakers.
What to know
This is the better fit when install flexibility matters. If you only need a simple drop-in speaker pair, compare simpler coaxial options; if you want stronger front-stage control, the convertible layout is the reason to look here.
Key features
- I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
- 2Ω High Output (HO) version for direct OEM replacement
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- 15% glass-fiber reinforced PA66 injected molded composite basket
- Co-molded surround and cone body chemically bonded for high durability
- Ultra-flexible braded tinsel leads securely stitched to spider
- Fatigue and tear resistant linear Nomex® spider
- Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
- Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
Technologies

CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has

Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be

ICC Crossover
The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier

UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in

Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.

COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to

Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter

Point Source Alignment
The low-profile tweeter position improves high-frequency dispersion by aligning both voice coils more precisely.

I.L.M. (Interchangeable Locking Mechanism)
The Interchangeable Locking Mechanism gives installers full control over tweeter placement by allowing the speaker
Showing the main technologies for this product.
Specs
Specifications
| Speaker Type | Convertible |
| Midrange Size (Nominal Diameter) | 6.5" |
| Tweeter Size (Nominal Diameter) | 3/4" (19mm) |
| Piezo Size (Nominal Diameter) | — |
| Nominal Impedance (Ohms) | 2Ω |
| Frequency Response (Hz) | 49Hz - 25kHz |
| Voice Coil Diameter (in/mm) | 1.25" (32.5 mm) |
| Crossover | Tweeter High-Pass: 9kHz @ 6dB/octave (internal) Tweeter High-Pass: 9kHz @ 12dB/octave (external) Tweeter Attenuation: 0dB or -3dB (external) |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Fs (Hz) | 65 Hz |
| Sensitivity (dB @ 1W/1M) | 88 dB |
| Sensitivity (2.83V/1M) | 91 dB |
| Cutout Diameter | 5.42" (137.6 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | — |
| Front-Loading Depth (Twist-Lock Adaptor) | — |
| Mounting Depth (With Motor Cover) | 2.5" (63.5 mm) |
| Min. Mounting Depth (No Motor Cover) | 2.26" (57.3 mm) |
| Front Side Clearance | 0.43" (11 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 3/4" 2Ω Tweeters (2) 6.5" 2Ω Speakers (1) 6.5" Speaker Cut-Out Template (4) Self-Tapping Phillips #4x16mm (Tweeter) (8) Self-Tapping Phillips #8x32mm (Speaker) (4) Self-Tapping Phillips #8x20mm (Crossover) (2) Woofer Phase Plugs (2) Flush-Mount Tweeter Cups (2) Surface-Mounting Tweeter Cups (1) Tweeter Removal Tool (2) HO Passive Crossover Network (Tweeter) (2) 18” Crossover Wiring Extensions (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Crimp Spade Conn. (.187”) (3) 18 AWG (+) Female Crimp Spade Conn. (.250”) (4) 18 AWG Crimp Butt Connectors (6) Zip Ties 4.8 mm x 350 mm |
| Mounting Hardware | Yes |
| Shipping Weight | 7 Lbs. (3.18 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 3/4" 2Ω Tweeters |
| 2 | — | 6.5" 2Ω Speakers |
| 1 | — | 6.5" Speaker Cut-Out Template |
| 4 | — | Self-Tapping Phillips #4x16mm (Tweeter) |
| 8 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 4 | — | Self-Tapping Phillips #8x20mm (Crossover) |
| 2 | — | Woofer Phase Plugs |
| 2 | — | Flush-Mount Tweeter Cups |
| 2 | — | Surface-Mounting Tweeter Cups |
| 1 | — | Tweeter Removal Tool |
| 2 | — | HO Passive Crossover Network (Tweeter) |
| 2 | — | 18” Crossover Wiring Extensions |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 4 | — | 18 AWG Crimp Butt Connectors |
| 6 | — | Zip Ties 4.8 mm x 350 mm |
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Similar products

















