1 / 14
Rockford Fosgate Punch P2V2-675Punch P2 6.75” 2-Way Convertible Speakers
Variants
The Punch P2 6.75" 2-way convertible speakers are a flexible upgrade intended for owners who want a higher-performance, vehicle-friendly replacement. They can be used as coaxial drop-ins or converted to a 2-way component configuration for separate tweeter placement.
Highlights
- I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
- Upgradable to a 3-Way Component by adding the P3V2-25 midrange speaker
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- Updated mounting flanges for direct fitment in new vehicles
Key specs
Full specs- Speaker Type
- Convertible
- Midrange Size (Nominal Diameter)
- 6.75"
- Tweeter Size (Nominal Diameter)
- 3/4" (19mm)
- Piezo Size (Nominal Diameter)
- —
- Nominal Impedance (Ohms)
- 4Ω
- Frequency Response (Hz)
- 49Hz - 25kHz
- Voice Coil Diameter (in/mm)
- 1.25" (32.5 mm)
- Crossover
- Tweeter High-Pass: 9kHz @ 6dB/octave (internal) Tweeter High-Pass: 9kHz @ 12dB/octave (external) Tweeter Attenuation: 0dB or -3dB (external)
Key specs
Full specs- Speaker Type
- Convertible
- Midrange Size (Nominal Diameter)
- 6.75"
- Tweeter Size (Nominal Diameter)
- 3/4" (19mm)
- Piezo Size (Nominal Diameter)
- —
Overview
The Punch P2 6.75" 2-way convertible speakers are a flexible upgrade intended for owners who want a higher-performance, vehicle-friendly replacement. They can be used as coaxial drop-ins or converted to a 2-way component configuration for separate tweeter placement.
Best for
- Upgrading factory speakers to improve clarity and output
- Installers and DIYers who need a convertible coaxial/component option
- Setups that require a 6.75" speaker diameter with flexible mounting alignment
Key points
- Convertible design: usable as coaxial or converted to a 2-way component system
- Internal and external crossover options to match system needs
- Auto Fit Architecture: redesigned frame, mounting holes, removable motor cover and factory location mounting flanges for flexible, precise alignment
- Larger motor and precision-tuned tweeter configuration for increased output
- Constructed with ultra-durable materials and validated with technologies such as CTA-2031 and Klippel verification
Fit and use
The speakers can be installed as a coaxial for a fast drop-in where a single speaker location exists, or used as part of a 2-way component system with separate tweeters mounted in A-pillars, dash locations, or other mid/high placements. Factory location mounting flanges are provided to aid alignment during integration into modern vehicle openings.
What to know
Kit contents listed by the manufacturer include two 6.75" 4Ω convertible speakers, two 3/4" 4Ω tweeters, two crossovers, one tweeter removal tool, and installation hardware. Detailed electrical and performance specifications are available from the manufacturer's product resources.
Highlights
Key features
- I.L.M. (Interchangeable Locking Mechanism) allows configuration as a coaxial or component system
- Upgradable to a 3-Way Component by adding the P3V2-25 midrange speaker
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- Updated mounting flanges for direct fitment in new vehicles
- Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
- Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- Includes woofer phase plug when tweeter relocated to separate tweeter cup
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- Co-molded surround and cone body chemically bonded for high durability
- Ultra-flexible braded tinsel leads securely stitched to spider
- Fatigue and tear resistant linear Nomex® spider
More info
Manufacturer details
The family of P2 PUNCH speakers were engineered to fit and built to put you in control. With a versatile convertible design, these speakers can be configured as either component or coaxial systems to suit your setup. The internal/external crossovers and redesigned frame geometry ensures seamless integration and installation. A larger motor, precision-tuned tweeter configuration, and ultra-durable materials deliver relentless output and uncompromising reliability.
Auto Fit Architecture: Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter were all engineered to ensure seamless integration into today’s modern vehicles. Our factory location mounting flanges provide a flexible yet precise alignment for drop-in integration into most factory mounting locations.
Superior Flexibility: With a versatile convertible design, these speakers can be configured as either component or coaxial systems to suit your setup. The Interchangeable Locking Mechanism (I.L.M.) lets you lock and unlock the tweeter from the wired mounting cup with zero hassle. This flexible design allows you to take even more control over your install layout and tweeter location. All engineered to ensure a seamless fit in most modern vehicles and to make installation as smooth and adaptable as possible.
Performance Driven: Powered by our advanced VAST 2.0™ technology, the PUNCH series delivers a 25% increase in cone area, resulting in maximum output and deeper, more impactful bass. The inverted dome tweeter ensures a precise high-frequency range, so every note comes through with clarity and accuracy. Rated at 75W RMS and 150W peak, PUNCH speakers deliver the output you demand, loud, clean, and relentless.
Built to Last: Every component. Every material. Chosen for strength. Built for the long haul. From reinforced polymer baskets to Santoprene™ surrounds and Nomex® spiders, every part of the PUNCH speaker is engineered to be a workhorse. No matter how hard you drive them, the class-leading construction delivers relentless performance that lasts.
Punch Speakers | Launch
Punch Speakers | Overview
Punch Speakers | Comparison
Punch Speakers | First Look
Additional details
Engineered to Fit. Built to Perform.
The P2 PUNCH speakers are flexible upgrades for OEM systems with optional tweeters or for custom upgrades. The P2 convertibles offer true versatility by using them as a coaxial on vehicles equipped with one speaker for a fast drop-in, or a 2-way component on vehicles equipped with a separate tweeter/midrange – like those found in an A-pillar or dash – for enhanced staging and imaging.
Kit Includes:
• (2) 3/4" 4Ω Tweeters
• (2) 6.75" 4Ω Convertible Speakers
• (2) Crossovers
• (1) Tweeter Removal Tool
• Installation Hardware
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
ICC Crossover
The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
Point Source Alignment
The low-profile tweeter position improves high-frequency dispersion by aligning both voice coils more precisely.
I.L.M. (Interchangeable Locking Mechanism)
The Interchangeable Locking Mechanism gives installers full control over tweeter placement by allowing the speaker
Showing the main technologies for this product.
Specs
Specifications
23
| Speaker Type | Convertible |
| Midrange Size (Nominal Diameter) | 6.75" |
| Tweeter Size (Nominal Diameter) | 3/4" (19mm) |
| Piezo Size (Nominal Diameter) | — |
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) | 49Hz - 25kHz |
| Voice Coil Diameter (in/mm) | 1.25" (32.5 mm) |
| Crossover | Tweeter High-Pass: 9kHz @ 6dB/octave (internal) Tweeter High-Pass: 9kHz @ 12dB/octave (external) Tweeter Attenuation: 0dB or -3dB (external) |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Fs (Hz) | 65 Hz |
| Sensitivity (dB @ 1W/1M) | 88 dB |
| Sensitivity (2.83V/1M) | 91 dB |
| Cutout Diameter | 5.51" (140 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | — |
| Front-Loading Depth (Twist-Lock Adaptor) | — |
| Mounting Depth (With Motor Cover) | 2.48" (62.9 mm) |
| Min. Mounting Depth (No Motor Cover) | 2.22" (56.5 mm) |
| Front Side Clearance | 0.43" (11 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 3/4" 4Ω Tweeters (2) 6.75" 4Ω Speakers (1) 6.75" Speaker Cut-Out Template (4) Self-Tapping Phillips #4x16mm (Tweeter) (8) Self-Tapping Phillips #8x32mm (Speaker) (4) Self-Tapping Phillips #8x20mm (Crossover) (2) Woofer Phase Plugs (2) Flush-Mount Tweeter Cups (2) Surface-Mounting Tweeter Cups (1) Tweeter Removal Tool (2) Passive Crossover Network (Tweeter) (2) 18” Crossover Wiring Extensions (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Crimp Spade Conn. (.187”) (3) 18 AWG (+) Female Crimp Spade Conn. (.250”) (4) 18 AWG Crimp Butt Connectors (6) Zip Ties 4.8 mm x 350 mm |
| Mounting Hardware | Yes |
| Shipping Weight | 7 Lbs. (3.18 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 3/4" 4Ω Tweeters |
| 2 | — | 6.75" 4Ω Speakers |
| 1 | — | 6.75" Speaker Cut-Out Template |
| 4 | — | Self-Tapping Phillips #4x16mm (Tweeter) |
| 8 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 4 | — | Self-Tapping Phillips #8x20mm (Crossover) |
| 2 | — | Woofer Phase Plugs |
| 2 | — | Flush-Mount Tweeter Cups |
| 2 | — | Surface-Mounting Tweeter Cups |
| 1 | — | Tweeter Removal Tool |
| 2 | — | Passive Crossover Network (Tweeter) |
| 2 | — | 18” Crossover Wiring Extensions |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 4 | — | 18 AWG Crimp Butt Connectors |
| 6 | — | Zip Ties 4.8 mm x 350 mm |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Knowledge Base Articles
- 2025 Surface & Flush Mount Speaker Grilles - Owner's Manual
- 2025 Punch P1V2/P2V2/P3V2 Speakers - Owner's Manual
Show all Knowledge Base topics
Ask Our Experts
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Videos
Product Launch
This is the future of sound. The PUNCH speakers were engineered to fit and built to perform. Step in or step aside. PUNCH is back.
Similar products
Compare nearby options
Rockford Fosgate•Punch
P1675-S Rockford Fosgate
$259.99CAD
$309.99
In stock
Rockford Fosgate•Prime
R1675-S Rockford Fosgate
4.5244 reviews
$129.99CAD
$159.99
In stock
Rockford Fosgate
T1675-S Rockford Fosgate
4.780 reviews
$449.99CAD
$529.99
In stock
Rockford Fosgate•Punch
P1675 Punch 6.75" 3-Way Full-Range Speaker (pr)
4.6267 reviews
$159.99CAD
$189.99
In stock
Rockford Fosgate•Prime
R1675X2 Prime 6.75" 2-Way Full-Range Speaker (pr)
4.5654 reviews
$109.99CAD
$129.99
In stock
Rockford Fosgate•Power
T1675 Power 6.75" 2-Way Full-Range Speaker (pr)
4.954 reviews
$219.99CAD
$259.99
In stock
Rockford Fosgate•Punch
P1V2-675 Punch P1 6.75” 3-Way Coaxial Speaker
$0.00CAD
Backorder