1 / 6
P1V2-675Punch P1 6.75” 3-Way Coaxial Speaker
Variants
The Punch P1 6.75” is a 3-way coaxial car speaker engineered to integrate into factory mounting locations while delivering clearer highs and more punch than single-cone drivers.
Highlights
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 6.75"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
- Nominal Impedance (Ohms)
- 4Ω
- Frequency Response (Hz)
- 49Hz - 25kHz
- Voice Coil Diameter (in/mm)
- 1" (25.4 mm)
- Crossover
- Tweeter High-Pass: 9kHz @ 6 dB/Octave
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 6.75"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
Highlights
Overview- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
Overview
The Punch P1 6.75” is a 3-way coaxial car speaker engineered to integrate into factory mounting locations while delivering clearer highs and more punch than single-cone drivers.
Best for
- Basic OEM systems needing a single-speaker upgrade
- Door or rear deck speaker locations
- Users who want improved clarity and punch without a full custom setup
Key points
- 3-way coaxial design with precision-tuned tweeter for improved clarity
- Auto Fit Architecture with redesigned frame geometry for drop-in integration
- Larger motor and ultra-durable materials for higher output and reliability
- Klippel Verified and CTA-2031 compliant design
- Features ICC crossover, Tru-Sight™, UV-inhibitor materials and vibration resistance
Fit and use
Everything was engineered to fit modern vehicles: redesigned frame, mounting holes, removable motor cover, and Factory Location Woofer Ring (F.L.W.R.) plus mounting flanges provide flexible, precise alignment for drop-in integration into most factory speaker locations. Intended as an all-in-one upgrade for single-speaker OEM positions such as doors or rear decks.
What to know
This product is a 6.75" 3-way coaxial speaker specified at 4 Ω. Designed as an OEM-style upgrade to replace factory single-cone drivers and add a dedicated tweeter for better high-frequency detail and punch. Includes features focused on durability and consistent performance in vehicle environments. Verify vehicle spea…
Highlights
Key features
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- Co-molded surround and cone body chemically bonded for high durability
- Fatigue and tear resistant linear Nomex® spider
- Ultra-flexible braded tinsel leads securely stitched to spider
- 15% glass-fiber reinforced PA66 injected molded composite basket
- Vented Kapton® voice coil former for excellent heat dissipation
- Overhung voice coil ensures consistent magnetic flux for less speaker distortion
- High strength Y35 ferrite motor structure (5mm larger over previous generation)
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
ICC Crossover
The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
Tru-Sight™
Tru-Sight™ tweeter ensures precise high-frequency alignment, so every note comes through with clarity and
VAST 2.0™
The Vertical Attach Surround Technique delivers a 25% increase in cone area, resulting in maximum output and
Showing the main technologies for this product.
Specs
Specifications
23
| Speaker Type | Coaxial |
| Midrange Size (Nominal Diameter) | 6.75" |
| Tweeter Size (Nominal Diameter) | 3/4” (19 mm) Inverted Dome |
| Piezo Size (Nominal Diameter) | 3/8” (9 mm) Co-Witnessed Convex |
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) | 49Hz - 25kHz |
| Voice Coil Diameter (in/mm) | 1" (25.4 mm) |
| Crossover | Tweeter High-Pass: 9kHz @ 6 dB/Octave |
| Fs (Hz) | 65 Hz |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Sensitivity (dB @ 1W/1M) | 88 dB |
| Sensitivity (2.83V/1M) | 91 dB |
| Cutout Diameter | 5.67" (144 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | — |
| Front-Loading Depth (Twist-Lock Adaptor) | — |
| Mounting Depth (With Motor Cover) | 2.48" (62.9 mm) |
| Min. Mounting Depth (No Motor Cover) | 2.24" (56.8 mm) |
| Front Side Clearance | 0.51" (12.9 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 6.75” 4Ω 3-Way Coaxial Speakers (1) 6.75” Speaker Cutout Template (8) Self-Tapping Phillips #8x32mm (Speaker) (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Crimp Spade Conn. (.187”) (3) 18 AWG (+) Female Crimp Spade Conn. (.250”) (4) 18 AWG Crimp Butt Connectors |
| Mounting Hardware | Yes |
| Shipping Weight | 5 Lbs. (2.27 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 6.75” 4Ω 3-Way Coaxial Speakers |
| 1 | — | 6.75” Speaker Cutout Template |
| 8 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 4 | — | 18 AWG Crimp Butt Connectors |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Similar products
Compare nearby options
Rockford Fosgate•Punch
P1675-S Speaker
$259.99CAD
$309.99
Backorder
Rockford Fosgate•Prime
R1675X2 Prime 6.75" 2-Way Full-Range Speaker (pr)
4.5654 reviews
$109.99CAD
$129.99
In stock
Rockford Fosgate•Punch
P1675 Punch 6.75" 3-Way Full-Range Speaker (pr)
4.6267 reviews
$0.00CAD
Backorder
Rockford Fosgate•Power
T1675 Power 6.75" 2-Way Full-Range Speaker (pr)
4.954 reviews
$0.00CAD
Backorder
Rockford Fosgate
T1675-S Speaker
4.780 reviews
$449.99CAD
$529.99
In stock
Rockford Fosgate•Prime
R1675-S Speaker
4.5244 reviews
$129.99CAD
$159.99
In stock
Rockford Fosgate•Punch
P2V2-675 Punch P2 6.75” 2-Way Convertible Speakers
$599.99CAD
$709.99
In stock