1 / 7
Rockford Fosgate Punch P1V2-5Punch P1 5.25” 3-Way Coaxial Speaker
Variants
The Punch P1 5.25" 3-way coaxial speaker is an all-in-one upgrade for standard factory car audio systems. It combines a larger motor, precision-tuned tweeter configurations, and durable materials to deliver clearer, punchier sound in doors or rear decks.
Highlights
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 5.25"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
- Nominal Impedance (Ohms)
- 4Ω
- Frequency Response (Hz)
- 56Hz - 25kHz
- Voice Coil Diameter (in/mm)
- 1" (25.4 mm)
- Crossover
- Tweeter High-Pass: 9kHz @ 6 dB/Octave
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 5.25"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
Highlights
Overview- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
Overview
The Punch P1 5.25" 3-way coaxial speaker is an all-in-one upgrade for standard factory car audio systems. It combines a larger motor, precision-tuned tweeter configurations, and durable materials to deliver clearer, punchier sound in doors or rear decks.
Best for
- Drivers who want a straightforward drop-in upgrade to single-cone factory speakers to gain improved high-frequency clar…
Key points
- Auto Fit Architecture: redesigned frame geometry, mounting holes and removable motor cover for seamless integration into modern factory locations.
- Precision-tuned tweeter configurations for improved clarity over single-cone OEM drivers.
- Larger motor and durable materials for higher output and long-term reliability.
- Factory Location Woofer Ring (F.L.W.R.) and mounting flanges to aid drop-in alignment.
- Technologies listed: CTA-2031, Klippel Verified, ICC Crossover, UV inhibitor materials, vibration resistance, COMSOL Multiphysics®, Tru-Sight™.
Fit and use
Designed as a simple, all-in-one upgrade for factory single-speaker locations such as door panels or rear decks. Vehicle-specific adapters and the redesigned frame help the speaker integrate into many modern mounting locations. Intended to replace single-cone drivers with a 3-way coaxial to add a dedicated tweeter for improved sound clarity.
What to know
This product is part of the P1 PUNCH series and is engineered to fit many factory locations using provided adapters and frame features. Kit information provided with the source lists: (2) 5.25" 4Ω coaxial speakers, (4) OEM adaptors, and installation hardware. Refer to manufacturer resources for details on fitment and…
Resources
Punch P1 5.25” 3-Way Coaxial Speaker https://rockfordfosgate.com/products/details/p1v2-5/ Punch Speakers | Overview (video) https://youtu.be/Nt3ZYm-8lEw 2025 Punch Speaker Twist-Lock - Advisory https://rockfordfosgate.z…
Highlights
Key features
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- Co-molded surround and cone body chemically bonded for high durability
- Fatigue and tear resistant linear Nomex® spider
- Ultra-flexible braded tinsel leads securely stitched to spider
- 15% glass-fiber reinforced PA66 injected molded composite basket
- Vented Kapton® voice coil former for excellent heat dissipation
- Overhung voice coil ensures consistent magnetic flux for less speaker distortion
- High strength Y35 ferrite motor structure (5mm larger over previous generation)
More info
Manufacturer details
The family of P1 PUNCH speakers were engineered to fit and built to put you in control. The vehicle-specific adapters and redesigned frame geometry ensures seamless integration and installation. A larger motor, precision-tuned tweeter configurations, and ultra-durable materials deliver relentless output and uncompromising reliability.
Auto Fit Architecture: Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter were all engineered to ensure seamless integration into today’s modern vehicles. Our Factory Location Woofer Ring (F.L.W.R.) and mounting flanges provide a flexible yet precise alignment for drop-in integration into most factory mounting locations.
Superior Flexibility: No matter the application, the PUNCH series offers exceptional flexibility for your build. Every detail has been carefully considered, from frame geometry to mounting holes and diameter all to ensure a seamless fit in most modern vehicles and to make installation as smooth and adaptable as possible.
Performance Driven: Powered by our advanced VAST 2.0™ technology, the PUNCH series delivers a 25% increase in cone area, resulting in maximum output and deeper, more impactful bass. The Tru-Sight™ tweeter ensures precise high-frequency alignment, so every note comes through with clarity and accuracy. Rated at 75W RMS and 150W peak, PUNCH speakers deliver the output you demand, loud, clean, and relentless.
Built to Last: Every component. Every material. Chosen for strength. Built for the long haul. From reinforced carbon fiber baskets to Santoprene™ surrounds and Nomex® spiders, every part of the PUNCH speaker is engineered to be a workhorse. No matter how hard you drive them, the class-leading construction delivers relentless performance that lasts.
Punch Speakers | Launch
Punch Speakers | Overview
Punch Speakers | Comparison
Punch Speakers | First Look
Additional details
Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.
Kit Includes:
• (2) 5.25" 4Ω Coaxial Speakers
• (4) OEM Adaptors
• Installation Hardware
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
ICC Crossover
The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
Tru-Sight™
Tru-Sight™ tweeter ensures precise high-frequency alignment, so every note comes through with clarity and
F.L.W.R.
Our Factory Location Woofer Ring (F.L.W.R.) and mounting flanges provide a flexible yet precise alignment for
Showing the main technologies for this product.
Specs
Specifications
23
| Speaker Type | Coaxial |
| Midrange Size (Nominal Diameter) | 5.25" |
| Tweeter Size (Nominal Diameter) | 3/4” (19 mm) Inverted Dome |
| Piezo Size (Nominal Diameter) | 3/8” (9 mm) Co-Witnessed Convex |
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) | 56Hz - 25kHz |
| Voice Coil Diameter (in/mm) | 1" (25.4 mm) |
| Crossover | Tweeter High-Pass: 9kHz @ 6 dB/Octave |
| Fs (Hz) | 75 Hz |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Sensitivity (dB @ 1W/1M) | 86 dB |
| Sensitivity (2.83V/1M) | 89 dB |
| Cutout Diameter | 4.37" (111 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | 2.33" (59.2 mm) |
| Front-Loading Depth (Twist-Lock Adaptor) | 2.60" (66 mm) |
| Mounting Depth (With Motor Cover) | — |
| Min. Mounting Depth (No Motor Cover) | 2.31" (58.6 mm) |
| Front Side Clearance | 0.44" (11.1 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 5.25” 4Ω 3-Way Coaxial Speakers (1) 5.25” Speaker Cutout Template (2) 5.25” 4-Tab Twist-Lock Adaptors (2) 5.25” to 4x6” Adaptors (2) 5.25” 3-Tab Wide Adaptors (2) 5.25” 3-Tab Wide Adaptors (8) Self-Tapping Phillips #8x32mm (Speaker) (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Crimp Spade Conn. (.187”) (3) 18 AWG (+) Female Crimp Spade Conn. (.250”) (4) 18 AWG Crimp Butt Connectors |
| Mounting Hardware | Yes |
| Shipping Weight | 5 Lbs. (2.27 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 5.25” 4Ω 3-Way Coaxial Speakers |
| 1 | — | 5.25” Speaker Cutout Template |
| 2 | — | 5.25” 4-Tab Twist-Lock Adaptors |
| 2 | — | 5.25” to 4x6” Adaptors |
| 2 | — | 5.25” 3-Tab Wide Adaptors |
| 2 | — | 5.25” 3-Tab Wide Adaptors |
| 8 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 4 | — | 18 AWG Crimp Butt Connectors |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Knowledge Base Articles
- 2025 Punch Speaker Twist-Lock - Advisory
- 2025 Surface & Flush Mount Speaker Grilles - Owner's Manual
- 2025 Punch P1V2/P2V2/P3V2 Speakers - Owner's Manual
Show all Knowledge Base topics
Ask Our Experts
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Videos
Product Launch
This is the future of sound. The PUNCH speakers were engineered to fit and built to perform. Step in or step aside. PUNCH is back.
Similar products
Compare nearby options
Rockford Fosgate•Punch
P152 Punch 5.25" 2-Way Full Range Speaker (pr)
4.681 reviews
$159.99CAD
$189.99
In stock
Rockford Fosgate•Prime
R1525X2 Prime 5.25" 2-Way Full-Range Speaker (pr)
4.51121 reviews
$109.99CAD
$129.99
In stock
Rockford Fosgate
R152-S Rockford Fosgate
4.4178 reviews
$129.99CAD
$159.99
In stock
Cerwin Vega
XED525C XED Series 5.25" 2-Way Component Speaker Set
$103.99CAD
In stock
Rockford Fosgate
P152-S Rockford Fosgate
$269.99CAD
$319.99
Backorder