1 / 6
P1V2-68Punch P1 6"x8” 3-Way Coaxial Speaker
Variants
The Rockford Fosgate P1V2-68 gives 6x8-inch factory speaker locations a more complete full-range upgrade while keeping the buying decision focused on fit, output, and everyday listening quality.
Highlights
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 6"x8"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
- Nominal Impedance (Ohms)
- 4Ω
- Frequency Response (Hz)
- 45Hz - 25kHz
- Voice Coil Diameter (in/mm)
- 1" (25.4 mm)
- Crossover
- Tweeter High-Pass: 9kHz @ 6 dB/Octave
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 6"x8"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
Highlights
Overview- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
Overview
The Rockford Fosgate P1V2-68 gives 6x8-inch factory speaker locations a more complete full-range upgrade while keeping the buying decision focused on fit, output, and everyday listening quality. It is a practical choice when you want a Punch-series coaxial speaker with dedicated high-frequency output, stronger midrange presence, and a frame design intended for easier vehicle integration.
Best for
- Replacing tired factory 6x8 speakers with a fuller 3-way coaxial design.
- Car audio upgrades where fit and mounting flexibility are part of the buying decision.
- Drivers who want more clarity and punch while keeping a familiar speaker location.
Key points
- 6x8-inch Punch P1 coaxial speaker for car audio applications.
- 3-way layout adds dedicated high-frequency detail compared with basic factory drivers.
- Designed around Rockford Fosgate fitment-focused frame geometry.
- Built for shoppers comparing speaker size, mounting needs, and everyday listening quality.
Fit and use
Use this as a factory-location speaker upgrade after confirming your vehicle opening, mounting depth, and connector needs. It is best evaluated against your vehicle fitment and the amplifier or radio power you plan to use.
What to know
Confirm vehicle compatibility before ordering, especially if your factory system uses premium audio, unusual brackets, or shallow mounting space. If fitment is uncertain, compare the speaker against your vehicle and system before purchase.
Highlights
Key features
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- Co-molded surround and cone body chemically bonded for high durability
- Fatigue and tear resistant linear Nomex® spider
- Ultra-flexible braded tinsel leads securely stitched to spider
- 15% glass-fiber reinforced PA66 injected molded composite basket
- Vented Kapton® voice coil former for excellent heat dissipation
- Overhung voice coil ensures consistent magnetic flux for less speaker distortion
- High strength Y35 ferrite motor structure (5mm larger over previous generation)
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
ICC Crossover
The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
Tru-Sight™
Tru-Sight™ tweeter ensures precise high-frequency alignment, so every note comes through with clarity and
VAST 2.0™
The Vertical Attach Surround Technique delivers a 25% increase in cone area, resulting in maximum output and
Showing the main technologies for this product.
Specs
Specifications
23
| Speaker Type | Coaxial |
| Midrange Size (Nominal Diameter) | 6"x8" |
| Tweeter Size (Nominal Diameter) | 3/4” (19 mm) Inverted Dome |
| Piezo Size (Nominal Diameter) | 3/8” (9 mm) Co-Witnessed Convex |
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) | 45Hz - 25kHz |
| Voice Coil Diameter (in/mm) | 1" (25.4 mm) |
| Crossover | Tweeter High-Pass: 9kHz @ 6 dB/Octave |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Fs (Hz) | 60 Hz |
| Sensitivity (dB @ 1W/1M) | 88 dB |
| Sensitivity (2.83V/1M) | 91 dB |
| Cutout Diameter | 7.19" x 5.18" (182.5 mm x 131.5 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | — |
| Front-Loading Depth (Twist-Lock Adaptor) | — |
| Mounting Depth (With Motor Cover) | 2.61" (66.4 mm) |
| Min. Mounting Depth (No Motor Cover) | 2.37" (60.3 mm) |
| Front Side Clearance | 0.43" (11 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 6”x8” 4Ω 3-Way Coaxial Speakers (1) 6”x8” Speaker Cutout Template (8) Self-Tapping Phillips #8x32mm (Speaker) (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Crimp Spade Conn. (.187”) (3) 18 AWG (+) Female Crimp Spade Conn. (.250”) (4) 18 AWG Crimp Butt Connectors |
| Mounting Hardware | Yes |
| Shipping Weight | 5 Lbs. (2.27 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 6”x8” 4Ω 3-Way Coaxial Speakers |
| 1 | — | 6”x8” Speaker Cutout Template |
| 8 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 4 | — | 18 AWG Crimp Butt Connectors |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Similar products
Compare nearby options
Rockford Fosgate•Punch
P1683 Punch 6"x8" 3-Way Full Range Speaker (pr)
4.7429 reviews
$159.99CAD
$189.99
In stock
Rockford Fosgate•Power
T1682 Power 6"x8" 2-Way Full-Range Speaker (pr)
4.715 reviews
$219.99CAD
$259.99
In stock
Rockford Fosgate•Prime
R168X2 Prime 6"x8" 2-Way Full-Range Speaker (pr)
4.7272 reviews
$139.99CAD
$169.99
In stock
Rockford Fosgate•Punch
P2V2-68 Punch P2 6"x8” 2-Way Convertible Speakers
$599.99CAD
$709.99
In stock
Rockford Fosgate•Punch
P2V2-68HO Punch P2 6"x8” 2-Way High-Output Convertible Speakers
$599.99CAD
$709.99
In stock