1 / 8
P1V2-46Punch P1 4"x6” 3-Way Coaxial Speaker
Variants
The Rockford Fosgate Punch P1 4x6 3-way coaxial speaker is part of the P1 PUNCH family, engineered to fit modern vehicles while delivering clearer, punchier sound. Key design elements include Auto Fit Architecture, a larger motor, and precision-tuned tweeter configurations.
Highlights
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 4" x 6"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
- Nominal Impedance (Ohms)
- 4Ω
- Frequency Response (Hz)
- 64Hz - 25kHz
- Voice Coil Diameter (in/mm)
- 1" (25.4 mm)
- Crossover
- Tweeter High-Pass: 9kHz @ 6 dB/Octave Midrange Bass Blocker: 400Hz @ 6 dB/Octave (100µF)
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 4" x 6"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
Highlights
Overview- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
Overview
The Rockford Fosgate Punch P1 4x6 3-way coaxial speaker is part of the P1 PUNCH family, engineered to fit modern vehicles while delivering clearer, punchier sound. Key design elements include Auto Fit Architecture, a larger motor, and precision-tuned tweeter configurations.
Best for
- Basic OEM systems with single-speaker locations (doors or rear decks) where a drop-in 3-way coaxial upgrade replaces si…
Key points
- 3-way coaxial design to add a dedicated tweeter and midrange above typical single-cone factory drivers.
- Auto Fit Architecture: redesigned frame, mounting holes, removable motor cover, Factory Location Woofer Ring (F.L.W.R.) and mounting flanges for drop-in integration into many fact…
- Larger motor and precision-tuned tweeter configurations for increased output and improved high-frequency detail.
- Durable construction with UV-inhibitor materials and vibration-resistant design; Klippel Verified and CTA-2031 referenced testing technologies.
- Integrated ICC crossover and Tru-Sight product validation; engineering supported by COMSOL Multiphysics® modeling.
Fit and use
Designed as an all-in-one upgrade for standard factory systems. Intended for use in typical 4x6 speaker openings such as door or rear deck locations. Verify vehicle mounting depth and hole pattern and consult the owner's manual or product reference for compatibility details.
What to know
Confirm your vehicle’s 4x6 mounting location, depth clearance, and grille or trim compatibility before purchasing. Refer to the owner’s manual and product reference for exact dimensions and mounting details. Kit contents listed in manufacturer materials: (2) 4"x6" 4Ω coaxial speakers, (2) bass blockers, and installati…
Highlights
Key features
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- Co-molded surround and cone body chemically bonded for high durability
- Fatigue and tear resistant linear Nomex® spider
- Ultra-flexible braded tinsel leads securely stitched to spider
- 15% glass-fiber reinforced PA66 injected molded composite basket
- Vented Kapton® voice coil former for excellent heat dissipation
- Overhung voice coil ensures consistent magnetic flux for less speaker distortion
- High strength Y35 ferrite motor structure (5mm larger over previous generation)
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
ICC Crossover
The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
Tru-Sight™
Tru-Sight™ tweeter ensures precise high-frequency alignment, so every note comes through with clarity and
VAST 2.0™
The Vertical Attach Surround Technique delivers a 25% increase in cone area, resulting in maximum output and
Showing the main technologies for this product.
Specs
Specifications
23
| Speaker Type | Coaxial |
| Midrange Size (Nominal Diameter) | 4" x 6" |
| Tweeter Size (Nominal Diameter) | 3/4” (19 mm) Inverted Dome |
| Piezo Size (Nominal Diameter) | 3/8” (9 mm) Co-Witnessed Convex |
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) | 64Hz - 25kHz |
| Voice Coil Diameter (in/mm) | 1" (25.4 mm) |
| Crossover | Tweeter High-Pass: 9kHz @ 6 dB/Octave Midrange Bass Blocker: 400Hz @ 6 dB/Octave (100µF) |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Fs (Hz) | 85 Hz |
| Sensitivity (dB @ 1W/1M) | 86 dB |
| Sensitivity (2.83V/1M) | 89 dB |
| Cutout Diameter | 5.62" x 3.66" (142.7 mm x 92.9 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | — |
| Front-Loading Depth (Twist-Lock Adaptor) | — |
| Mounting Depth (With Motor Cover) | 2.02" (51.2 mm) |
| Min. Mounting Depth (No Motor Cover) | 1.93" (49.1 mm) |
| Front Side Clearance | 0.38" (9.7 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 4”x6” 4Ω 3-Way Coaxial Speakers (1) 4”x6” Speaker Cutout Template (2) 4”x6” 4-Tab Adaptors (2) 100µF Non-Polarized Cap (Bass-Blockers) (8) Machine Nut M3x0.5 (8) Machine Screw M3x0.5, 5mm L (8) Self-Tapping Phillips #8x32mm (Speaker) (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Crimp Spade Conn. (.187”) (3) 18 AWG (+) Female Crimp Spade Conn. (.250”) (4) 18 AWG Crimp Butt Connectors |
| Mounting Hardware | Yes |
| Shipping Weight | 3 Lbs. (1.36 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 4”x6” 4Ω 3-Way Coaxial Speakers |
| 1 | — | 4”x6” Speaker Cutout Template |
| 2 | — | 4”x6” 4-Tab Adaptors |
| 2 | — | 100µF Non-Polarized Cap (Bass-Blockers) |
| 8 | — | Machine Nut M3x0.5 |
| 8 | — | Machine Screw M3x0.5, 5mm L |
| 8 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 4 | — | 18 AWG Crimp Butt Connectors |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Similar products
