1 / 8
Rockford Fosgate Punch P1V2-25Punch P1 2.5” 3-Way Coaxial Speaker
Variants
The Punch P1 2.5" 3-way coaxial from Rockford Fosgate is an engineered, drop-in friendly upgrade for standard factory systems.
Highlights
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 2.5"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
- Nominal Impedance (Ohms)
- 4Ω
- Voice Coil Diameter (in/mm)
- 1" (25.4 mm)
- Frequency Response (Hz)
- 150Hz - 25kHz
- Crossover
- Tweeter High-Pass: 9kHz @ 6 dB/Octave Midrange Bass Blocker: 1,200Hz @ 6 dB/Octave (33µF)
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 2.5"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
Highlights
Overview- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
Overview
The Punch P1 2.5" 3-way coaxial from Rockford Fosgate is an engineered, drop-in friendly upgrade for standard factory systems. It combines a larger motor, precision-tuned tweeter configurations and durable materials to improve clarity and output compared with typical single-cone factory drivers.
Best for
- Drivers who want a straightforward audio upgrade for basic OEM systems and single-speaker locations in doors or rear de…
- where space and mounting options are limited.
Key points
- 2.5" 3-way coaxial design for improved clarity over single-cone drivers
- Auto Fit Architecture with redesigned frame geometry and removable motor cover to aid integration
- Larger motor and precision-tuned tweeter configurations for higher output and clearer highs
- Durable, UV-inhibitor materials and vibration-resistant construction
- Technologies: Spiderless Piezo Tweeter, ICC Crossover, Klippel Verified, CTA-2031 testing, COMSOL Multiphysics® modeling
Fit and use
Engineered to fit modern vehicle openings: the frame, mounting holes, speaker diameter and mounting flanges are redesigned to provide flexible alignment and simpler drop-in integration into many factory locations. Factory Location Woofer Ring (F.L.W.R.) and adaptors are included to help match common mounting positions.
What to know
These speakers are presented as a simple, all-in-one upgrade for standard factory systems. Replacing factory single-cone drivers with a 3-way coaxial can deliver a noticeable increase in clarity and punch. Kit contents provided in the source material include: (2) 2.5" 4Ω coaxial speakers, (2) bass blockers, (2) OEM ad…
Highlights
Key features
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- Co-molded surround and cone body chemically bonded for high durability
- Fatigue and tear resistant linear Nomex® spider
- Ultra-flexible braded tinsel leads securely stitched to spider
- 15% glass-fiber reinforced PA66 injected molded composite basket
- Vented Kapton® voice coil former for excellent heat dissipation
- Overhung voice coil ensures consistent magnetic flux for less speaker distortion
- High strength Y35 ferrite motor structure (5mm larger over previous generation)
More info
Manufacturer details
The family of P1 PUNCH speakers were engineered to fit and built to put you in control. The vehicle-specific adapters and redesigned frame geometry ensures seamless integration and installation. A larger motor, precision-tuned tweeter configurations, and ultra-durable materials deliver relentless output and uncompromising reliability.
Auto Fit Architecture: Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter were all engineered to ensure seamless integration into today’s modern vehicles. Our Factory Location Woofer Ring (F.L.W.R.) and mounting flanges provide a flexible yet precise alignment for drop-in integration into most factory mounting locations.
Superior Flexibility: No matter the application, the PUNCH series offers exceptional flexibility for your build. Every detail has been carefully considered, from frame geometry to mounting holes and diameter all to ensure a seamless fit in most modern vehicles and to make installation as smooth and adaptable as possible.
Performance Driven: Powered by our advanced VAST 2.0™ technology, the PUNCH series delivers a 25% increase in cone area, resulting in maximum output and deeper, more impactful bass. The Tru-Sight™ tweeter ensures precise high-frequency alignment, so every note comes through with clarity and accuracy. Rated at 75W RMS and 150W peak, PUNCH speakers deliver the output you demand, loud, clean, and relentless.
Built to Last: Every component. Every material. Chosen for strength. Built for the long haul. From reinforced carbon fiber baskets to Santoprene™ surrounds and Nomex® spiders, every part of the PUNCH speaker is engineered to be a workhorse. No matter how hard you drive them, the class-leading construction delivers relentless performance that lasts.
Punch Speakers | Launch
Punch Speakers | Overview
Punch Speakers | Comparison
Punch Speakers | First Look
Additional details
Engineered to Fit. Built to Perform.
The P1 PUNCH speakers are simple, all-in-one upgrades for standard factory systems. The P1 are perfect for Basic OEM systems with single-speaker locations in doors or rear decks. Factory single cone drivers don’t have tweeters and replacing them with a 3-way coaxial will deliver a big leap in sound clarity and “punch”.
Kit Includes:
• (2) 2.5" 4Ω Coaxial Speakers
• (2) Bass Blockers
• (2) OEM Adaptors
• Installation Hardware
Technologies
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
ICC Crossover
The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
Spiderless Piezo Tweeter
The 9mm polypropylene piezo super-tweeter eliminates the need for a conventional spider by utilizing magnetic
VAST 2.0™
The Vertical Attach Surround Technique delivers a 25% increase in cone area, resulting in maximum output and
Showing the main technologies for this product.
Specs
Specifications
22
| Speaker Type | Coaxial |
| Midrange Size (Nominal Diameter) | 2.5" |
| Tweeter Size (Nominal Diameter) | 3/4” (19 mm) Inverted Dome |
| Piezo Size (Nominal Diameter) | 3/8” (9 mm) Co-Witnessed Convex |
| Nominal Impedance (Ohms) | 4Ω |
| Voice Coil Diameter (in/mm) | 1" (25.4 mm) |
| Frequency Response (Hz) | 150Hz - 25kHz |
| Crossover | Tweeter High-Pass: 9kHz @ 6 dB/Octave Midrange Bass Blocker: 1,200Hz @ 6 dB/Octave (33µF) |
| Fs (Hz) | 200 Hz |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Sensitivity (dB @ 1W/1M) | 82 dB |
| Sensitivity (2.83V/1M) | 85 dB |
| Cutout Diameter | 2.54" (64.5 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | 1.47" (37.3 mm) |
| Front-Loading Depth (Twist-Lock Adaptor) | 1.6" (40.6 mm) |
| Mounting Depth (With Motor Cover) | — |
| Min. Mounting Depth (No Motor Cover) | — |
| Front Side Clearance | 0.32" (8.2 mm) |
| Grille/Trim Ring Included | No |
| Removable Motor Cover | No |
| Included in the Box | (2) 2.5” 4Ω 3-Way Coaxial Speakers (2) 2.5” Twist-Lock Speaker Adaptors (1) 2.5” Speaker Cutout Templates (2) 33µF Non-Polarized Cap (Bass-Blockers) (4) Self-Tapping Phillips #8x32mm (Speakers) (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Spade Conn. (.187”) (3) 18 AWG (+) Female Spade Conn. (.250”) (4) 18 AWG Crimp Butt Connectors |
| Mounting Hardware | Yes |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 2.5” 4Ω 3-Way Coaxial Speakers |
| 2 | — | 2.5” Twist-Lock Speaker Adaptors |
| 1 | — | 2.5” Speaker Cutout Templates |
| 2 | — | 33µF Non-Polarized Cap (Bass-Blockers) |
| 4 | — | Self-Tapping Phillips #8x32mm (Speakers) |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Spade Conn. (.250”) |
| 4 | — | 18 AWG Crimp Butt Connectors |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Knowledge Base Articles
- 2025 Punch Speaker Twist-Lock Information
- 2025 Surface & Flush Mount Speaker Grilles - Owner's Manual
- 2025 Punch P1V2/P2V2/P3V2 Speakers - Owner's Manual
Show all Knowledge Base topics
Ask Our Experts
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Videos
Product Launch
This is the future of sound. The PUNCH speakers were engineered to fit and built to perform. Step in or step aside. PUNCH is back.
Similar products
