1 / 8
P3V2-25Punch P3 2.5” 3-Way Component Midrange
Variants
The Punch P3 2.5" (P3V2-25) is a Rockford Fosgate midrange module engineered for 3-way car audio systems. It focuses on precise midrange reproduction, durable materials, and vehicle-friendly fitment.
Highlights
- Midrange driver for use in center channel or 3-way component systems
- Updated mounting flanges for direct fitment in new vehicles
- External 6dB/octave Band-Pass crossover
- 2-pin micro-Molex crossover connection that are secured using screws or zip ties
Key specs
Full specs- Speaker Type
- Component System
- Piezo Size (Nominal Diameter)
- —
- Tweeter Size (Nominal Diameter)
- —
- Midrange Size (Nominal Diameter)
- 2.5"
- Woofer Size (Nominal Diameter)
- —
- Nominal Impedance (Ohms)
- 4Ω
- Frequency Response (Hz)
- 135Hz - 15kHz
- Voice Coil Diameter (in/mm)
- 1.00" (25.4 mm)
Key specs
Full specs- Speaker Type
- Component System
- Piezo Size (Nominal Diameter)
- —
- Tweeter Size (Nominal Diameter)
- —
- Midrange Size (Nominal Diameter)
- 2.5"
Highlights
Overview- Midrange driver for use in center channel or 3-way component systems
- Updated mounting flanges for direct fitment in new vehicles
- External 6dB/octave Band-Pass crossover
Overview
The Punch P3 2.5" (P3V2-25) is a Rockford Fosgate midrange module engineered for 3-way car audio systems. It focuses on precise midrange reproduction, durable materials, and vehicle-friendly fitment.
Best for
- 3-way component car audio systems
- Drivers upgrading factory midrange clarity
- Installations requiring compact midrange drivers with reliable output
Key points
- Designed for 3-way systems — intended to work with separate tweeter, midrange, and woofer components.
- Auto Fit Architecture: re-designed frame, mounting holes, and diameter for easier integration into modern vehicles.
- Factory Location Woofer Ring (F.L.W.R.) and mounting flanges provide flexible alignment for many factory locations.
- VAST 2.0™ and larger cone area for increased effective radiating surface and output.
- Klippel verified and CTA-2031 referenced testing for measured performance.
- UV inhibitor and vibration-resistant materials for durability.
Fit and use
The P3V2-25 is built as a midrange element for systems that separate frequencies across tweeters, midranges, and woofers. Its Auto Fit Architecture and F.L.W.R. mounting features are intended to simplify drop-in-style integration into many factory locations; verify mounting depth, hole pattern, and wiring compatibility for your vehicle before installation.
What to know
This component is intended for use in a complete 3-way system and typically requires appropriate crossovers and matching tweeter/woofer components. The product listing notes included kit hardware; consult the product resources for detailed mounting and connector information. Performance claims reference Klippel verifi…
Highlights
Key features
- Midrange driver for use in center channel or 3-way component systems
- Updated mounting flanges for direct fitment in new vehicles
- External 6dB/octave Band-Pass crossover
- 2-pin micro-Molex crossover connection that are secured using screws or zip ties
- Includes mounting hardware
- Grilles sold separately
- Includes cut-out template
- Sold in pairs (2 each)
- 2-Year Warranty
- CTA-2031
- Klippel Verified
- UV Inhibitor Materials
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
F.L.W.R.
Our Factory Location Woofer Ring (F.L.W.R.) and mounting flanges provide a flexible yet precise alignment for
VAST 2.0™
The Vertical Attach Surround Technique delivers a 25% increase in cone area, resulting in maximum output and
MC3 (Multi Configuration Crossover Chassis)
Allows the crossover to break down into separate units, giving you total freedom to route and wire your setup your
Specs
Specifications
24
| Speaker Type | Component System |
| Piezo Size (Nominal Diameter) | — |
| Tweeter Size (Nominal Diameter) | — |
| Midrange Size (Nominal Diameter) | 2.5" |
| Woofer Size (Nominal Diameter) | — |
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) | 135Hz - 15kHz |
| Voice Coil Diameter (in/mm) | 1.00" (25.4 mm) |
| Crossover | MIDRANGE: • BP 600Hz - 6kHz @ 6dB/octave (external) MIDRANGE BASS BLOCKER: • LP 1,200Hz @ 6 dB/Octave (33µF) |
| Sensitivity (dB @ 1W/1M) | 82 dB |
| Sensitivity (2.83V/1M) | 85 dB |
| Fs (Hz) | 180 Hz |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Midrange Cutout Diameter | 2.54" (64.5 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | 1.47" (37.3 mm) |
| Front-Loading Depth (Twist-Lock Adaptor) | 1.60" (40.6 mm) |
| Mounting Depth (With Motor Cover) | — |
| Mounting Depth (No Motor Cover) | — |
| Midrange Front Side Clearance | 0.26" (6.5 mm) |
| Removable Motor Cover | No |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 2.5” 4Ω Speakers (2) Twist-Lock Adaptors (1) 2.5” Speaker Cut-Out Template (2) Passive Crossover Network (Midrange) (2) 18” Crossover Wiring Extensions (2) 33µF Non-Polarized Capacitor (Bass Blocker) (4) Self-Tapping Phillips #4x16mm (Tweeter) (4) Self-Tapping Phillips #8x32mm (Speaker) (2) Zip Ties 4.8 mm x 350 mm (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Crimp Spade Conn. (.187”) (3) 18 AWG (+) Female Crimp Spade Conn. (.250”) (6) 18 AWG Crimp Butt Connectors |
| Mounting Hardware | Yes |
| Shipping Weight | 2 Lbs. (0.91 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 2.5” 4Ω Speakers |
| 2 | — | Twist-Lock Adaptors |
| 1 | — | 2.5” Speaker Cut-Out Template |
| 2 | — | Passive Crossover Network (Midrange) |
| 2 | — | 18” Crossover Wiring Extensions |
| 2 | — | 33µF Non-Polarized Capacitor (Bass Blocker) |
| 4 | — | Self-Tapping Phillips #4x16mm (Tweeter) |
| 4 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 2 | — | Zip Ties 4.8 mm x 350 mm |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 6 | — | 18 AWG Crimp Butt Connectors |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Similar products
