1 / 16
Rockford Fosgate Punch P3V2-69Punch P3 6"x9” 3-Way Component System
A 6"x9" 3-way component speaker system from Rockford Fosgate designed to deliver precise, immersive car audio through three independent drivers and robust materials.
Highlights
- 3-way component system with discrete woofer, midrange, and tweeter
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- P3V2-25 Punch P3 2.5” 3-Way Component Midrange
Key specs
Full specs- Speaker Type
- Component System
- Piezo Size (Nominal Diameter)
- —
- Tweeter Size (Nominal Diameter)
- 3/4" (19mm)
- Midrange Size (Nominal Diameter)
- 2.5"
- Woofer Size (Nominal Diameter)
- 6"x9"
- Nominal Impedance (Ohms)
- 4Ω
- Frequency Response (Hz)
- 49Hz - 25kHz
- Voice Coil Diameter (in/mm)
- 1.25" (32.5 mm)
Key specs
Full specs- Speaker Type
- Component System
- Piezo Size (Nominal Diameter)
- —
- Tweeter Size (Nominal Diameter)
- 3/4" (19mm)
- Midrange Size (Nominal Diameter)
- 2.5"
Highlights
Overview- 3-way component system with discrete woofer, midrange, and tweeter
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
Overview
A 6"x9" 3-way component speaker system from Rockford Fosgate designed to deliver precise, immersive car audio through three independent drivers and robust materials.
Best for
- Drivers seeking a high-fidelity OEM-style replacement
- Listeners who want clear highs, defined midrange, and accurate low-end
- Installations where a 3-way component configuration is preferred for tonal control
Key points
- True 3-way design with separate tweeter, midrange, and woofer drivers
- Three independent drivers reproduce each frequency range with clarity
- Precision-tuned tweeter configurations for detailed high frequencies
- Larger cone area and durable materials for increased output and longevity
- Auto Fit Architecture with redesigned frame, removable motor cover, and factory-location mounting flanges
- Multi-Configuration Crossover Chassis (M.C.3) for flexible crossover placement
Fit and use
Designed for integration into modern vehicle locations, the speakers use a re-designed frame, mounting holes, removable motor cover and factory-location flanges to aid alignment. The crossover chassis can be separated for flexible placement during installation.
What to know
This component system uses 4 Ω drivers (as noted in the kit listing); confirm speaker mounting dimensions, depth, and electrical compatibility with your vehicle and amplifier before purchase. Review product documentation and vehicle fit details to ensure compatibility; seek professional installation if unsure.
Highlights
Key features
- 3-way component system with discrete woofer, midrange, and tweeter
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- P3V2-25 Punch P3 2.5” 3-Way Component Midrange
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- Co-molded surround and cone body chemically bonded for high durability
- Surface/flush tweeter cups use copper spring contacts for front-side servicing (tool included)
- Flush-mount threaded tweeter cup fits 3/8" thick panels using 1.5" hole-saw cutout
- Ultra-flexible braded tinsel leads securely stitched to spider
- Fatigue and tear resistant linear Nomex® spider
- 15% glass-fiber reinforced PA66 injected molded composite basket
More info
Manufacturer details
The family of P3 PUNCH speakers were engineered to fit and built to put you in control. Featuring a true 3-way speaker system, it delivers a precise and immersive audio experience. Three independent drivers ensure every frequency range is reproduced with exceptional clarity and accuracy. A larger cone area, precision-tuned tweeter configurations, and ultra-durable materials deliver relentless output and uncompromising reliability.
Auto Fit Architecture: Everything was engineered to fit. A re-designed frame, removable motor cover, mounting holes, and speaker diameter were all engineered to ensure seamless integration into today’s modern vehicles. Our factory location mounting flanges provide a flexible yet precise alignment for drop-in integration into most factory mounting locations.
Superior Flexibility: The Multi-Configuration Crossover Chassis (M.C.3) breaks down into separate units, giving you total freedom to route and wire your setup your way. Every detail has been carefully considered, from frame geometry to mounting holes and diameter all to ensure a seamless fit in most modern vehicles and to make installation as smooth and adaptable as possible.
Performance Driven: Powered by our advanced VAST 2.0™ technology, the PUNCH series delivers a 25% increase in cone area, resulting in maximum output and deeper, more impactful bass. The inverted dome tweeter ensures a precise high-frequency range, so every note comes through with clarity and accuracy. Rated at 75W RMS and 150W peak, PUNCH speakers deliver the output you demand, loud, clean, and relentless.
Built to Last: Every component. Every material. Chosen for strength. Built for the long haul. From reinforced polymer baskets to Santoprene™ surrounds and Nomex® spiders, every part of the PUNCH speaker is engineered to be a workhorse. No matter how hard you drive them, the class-leading construction delivers relentless performance that lasts.
Punch Speakers | Launch
Punch Speakers | Overview
Punch Speakers | Comparison
Punch Speakers | First Look
Additional details
Engineered to Fit. Built to Perform.
The P3 PUNCH offers high-fidelity performance in a premium OEM replacement. The P3 speakers are 3-way component systems for vehicles equipped with a separate tweeter, midrange, and woofer. These are for drivers who want it all. Precision detail, powerful midrange, and accurate lows.
Kit Includes:
• (2) 3/4" 4Ω Tweeters
• (2) 2.5" 4Ω Midrange
• (2) 6"x9" 4Ω Woofers
• (6) Crossovers (2x TWT/MID/WFR)
• (2) OEM Adaptors
• Installation Hardware
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
F.L.W.R.
Our Factory Location Woofer Ring (F.L.W.R.) and mounting flanges provide a flexible yet precise alignment for
VAST 2.0™
The Vertical Attach Surround Technique delivers a 25% increase in cone area, resulting in maximum output and
Edge Driven Tweeter
The inverted dome tweeter incorporates an edge-driven voice coil, engineered for high-performance audio systems.
Showing the main technologies for this product.
Specs
Specifications
24
| Speaker Type | Component System |
| Piezo Size (Nominal Diameter) | — |
| Tweeter Size (Nominal Diameter) | 3/4" (19mm) |
| Midrange Size (Nominal Diameter) | 2.5" |
| Woofer Size (Nominal Diameter) | 6"x9" |
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) | 49Hz - 25kHz |
| Voice Coil Diameter (in/mm) | 1.25" (32.5 mm) |
| Crossover | TWEETER: • HP 9kHz @ 12dB/octave (external) • Attenuation: 0dB or -3dB (external) MIDRANGE: • BP 600Hz - 6kHz @ 6dB/octave (external) MIDRANGE BASS BLOCKER: • — WOOFER: • LP 1.2kHz @ 6dB/octave (external) |
| Sensitivity (dB @ 1W/1M) | 89 dB |
| Sensitivity (2.83V/1M) | 92 dB |
| Fs (Hz) | 65 Hz |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Midrange Rear-Loading Depth (Twist-Lock Adaptor) | 1.47" (37.3 mm) |
| Midrange Front-Loading Depth (Twist-Lock Adaptor) | 1.60" (40.6 mm) |
| Woofer Cutout Diameter | 8.41" x 5.71" (213.5 mm x 145 mm) |
| Woofer Mounting Depth (With Motor Cover) | 3.13" (79.4 mm) |
| Woofer Mounting Depth (No Motor Cover) | 2.76" (70 mm) |
| Woofer Front Side Clearance | 0.42" (10.6 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 3/4” 4Ω Tweeter (2) 2.5” 4Ω Speakers (2) 6”x9” 4Ω Speakers (2) Twist-Lock Adaptors (1) 2.5” Speaker Cutout Template (1) 6”x9” Speaker Cutout Template (2) Flush-Mount Tweeter Cups (2) Surface-Mounting Tweeter Cups (1) Tweeter Removal Tool (2) Passive Crossover (Tweeter) (2) Passive Crossover (Midrange) (2) Passive Crossover (Woofer) (12) Self-Tapping Phillips #4x16mm (Tweeter) (10) 18” Crossover Wiring Extensions (4) Self-Tapping Phillips #8x20mm (Crossover) (12) Self-Tapping Phillips #8x32mm (Speaker) (6) Zip Ties 4.8 mm x 350 mm (4) 18 AWG Red/Black Speaker Wire, 205 mm (6) 18 AWG (–) Female Crimp Spade Conn. (.187”) (6) 18 AWG (+) Female Crimp Spade Conn. (.250”) (12) 18 AWG Crimp Butt Connectors |
| Mounting Hardware | Yes |
| Shipping Weight | 11 Lbs. (4.99 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 3/4” 4Ω Tweeter |
| 2 | — | 2.5” 4Ω Speakers |
| 2 | — | 6”x9” 4Ω Speakers |
| 2 | — | Twist-Lock Adaptors |
| 1 | — | 2.5” Speaker Cutout Template |
| 1 | — | 6”x9” Speaker Cutout Template |
| 2 | — | Flush-Mount Tweeter Cups |
| 2 | — | Surface-Mounting Tweeter Cups |
| 1 | — | Tweeter Removal Tool |
| 2 | — | Passive Crossover (Tweeter) |
| 2 | — | Passive Crossover (Midrange) |
| 2 | — | Passive Crossover (Woofer) |
| 12 | — | Self-Tapping Phillips #4x16mm (Tweeter) |
| 10 | — | 18” Crossover Wiring Extensions |
| 4 | — | Self-Tapping Phillips #8x20mm (Crossover) |
| 12 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 6 | — | Zip Ties 4.8 mm x 350 mm |
| 4 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 6 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 6 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 12 | — | 18 AWG Crimp Butt Connectors |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Knowledge Base Articles
- 2025 Surface & Flush Mount Speaker Grilles - Owner's Manual
- 2025 Punch P1V2/P2V2/P3V2 Speakers - Owner's Manual
Show all Knowledge Base topics
Ask Our Experts
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Videos
Product Launch
This is the future of sound. The PUNCH speakers were engineered to fit and built to perform. Step in or step aside. PUNCH is back.
Accessories
Rockford Fosgate•Punch
GF-25 2.5” Flush Mount Grilles
$0.00CAD
Backorder
Rockford Fosgate•Punch
GS-25 2.5” Surface Mount Grilles
$0.00CAD
Backorder
Rockford Fosgate•Punch
GS-69 6x9” Surface Mount Grilles
$0.00CAD
Backorder
Rockford Fosgate
RFWP16-30 16 AWG Speaker Wire Packaged 30 Foot Frosted Black/Silver
$59.99CAD
$79.99
In stock
Similar products
Compare nearby options
Rockford Fosgate•Punch
P1694 Punch 6"x9" 4-Way Full Range Speaker (pr)
4.730 reviews
$199.99CAD
$239.99
In stock
Rockford Fosgate•Punch
P1692 Punch 6"x9" 2-Way Full Range Speaker (pr)
4.7258 reviews
$179.99CAD
$219.99
Backorder
Rockford Fosgate•Prime
R169X2 Prime 6"x9" 2-Way Full-Range Speaker (pr)
4.6369 reviews
$149.99CAD
$179.99
In stock
Rockford Fosgate•Prime
R169X3 Prime 6"x9" 3-Way Full-Range Speaker (pr)
4.8202 reviews
$169.99CAD
$199.99
In stock
Rockford Fosgate•Punch
P1V2-69 Punch P1 6"x9” 3-Way Coaxial Speaker
$0.00CAD
Backorder
Rockford Fosgate•Power
T1692 Power 6"X9" 2-Way Full-Range Speaker (pr)
4.718 reviews
$259.99CAD
$309.99
In stock
Rockford Fosgate•Punch
P2V2-69 Punch P2 6"x9” 2-Way Convertible Speakers
$0.00CAD
Backorder
Rockford Fosgate•Punch
P2V2-69HO Punch P2 6”x9” 2-Way High-Output Convertible Speakers
$0.00CAD
Backorder