1 / 6
P1V2-6Punch P1 6.0” 3-Way Coaxial Speaker
Variants
The Punch P1 6.0" 3-way coaxial speaker is an all-in-one upgrade for basic factory systems. It combines Auto Fit Architecture, a larger motor and a precision-tuned tweeter to improve clarity and output.
Highlights
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 6.0"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
- Nominal Impedance (Ohms)
- 4Ω
- Frequency Response (Hz)
- 53Hz - 25kHz
- Voice Coil Diameter (in/mm)
- 1" (25.4 mm)
- Power Handling (Watts RMS)
- 75 Watts RMS 150 Watts Peak
Key specs
Full specs- Speaker Type
- Coaxial
- Midrange Size (Nominal Diameter)
- 6.0"
- Tweeter Size (Nominal Diameter)
- 3/4” (19 mm) Inverted Dome
- Piezo Size (Nominal Diameter)
- 3/8” (9 mm) Co-Witnessed Convex
Highlights
Overview- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
Overview
The Punch P1 6.0" 3-way coaxial speaker is an all-in-one upgrade for basic factory systems. It combines Auto Fit Architecture, a larger motor and a precision-tuned tweeter to improve clarity and output.
Best for
- Replacing factory single-cone drivers in doors or rear decks
- Owners seeking a simple drop-in upgrade for OEM systems
- Applications requiring durable, vibration-resistant speakers
Key points
- 3-way coaxial design with a precision-tuned tweeter for clearer highs.
- Auto Fit Architecture — re-designed frame, mounting holes, removable motor cover and speaker diameter for easier integration.
- Factory Location Woofer Ring (F.L.W.R.) and mounting flanges for flexible alignment in many factory locations.
- Larger motor and ultra-durable materials for increased output and reliability.
- Technologies include CTA-2031, Klippel Verified, ICC Crossover, Tru-Sight™, COMSOL Multiphysics®, UV inhibitor materials and vibration resistance.
Fit and use
Engineered to fit modern vehicles: the re-designed frame and mounting features are intended to aid drop-in integration into many factory mounting locations. The P1 is described as suitable for single-speaker OEM locations such as doors or rear decks.
What to know
Confirm speaker diameter, mounting depth and connector compatibility with your vehicle before purchase. The product information lists the kit as including two 6.0" 4Ω coaxial speakers and installation hardware. Refer to product resources for installation details and compatibility guidance.
Highlights
Key features
- Updated mounting flanges for direct fitment in new vehicles
- 3/4” (19 mm) Tetolon® inverted dome tweeter for reliable performance under stress
- 3/8” (9 mm) Polypropylene piezo super tweeter for enhanced high-frequency response
- 20-40% Mica reinforced Polypropylene curvilinear cone for enhanced rigidity and sonic quality
- Santoprene™ half-roll surround for low distortion and unmatched fatigue resistance
- Co-molded surround and cone body chemically bonded for high durability
- Fatigue and tear resistant linear Nomex® spider
- Ultra-flexible braded tinsel leads securely stitched to spider
- 15% glass-fiber reinforced PA66 injected molded composite basket
- Vented Kapton® voice coil former for excellent heat dissipation
- Overhung voice coil ensures consistent magnetic flux for less speaker distortion
- High strength Y35 ferrite motor structure (5mm larger over previous generation)
Technologies
CTA-2031
Power handling on Rockford Fosgate speakers conform to CTA-2031 industry standards. This means your speaker has
Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
ICC Crossover
The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier
UV Inhibitor Materials
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in
Vibration Resistant
Components are able to withstand shock and vibration conditions common with outdoor vehicles.
COMSOL Multiphysics®
COMSOL software analyzes complex physical phenomena (Multiphysics®) that uses FEM (Finite Element Method) to
Auto Fit Architecture
Everything was engineered to fit. A re-designed frame, mounting holes, removable motor cover and speaker diameter
Tru-Sight™
Tru-Sight™ tweeter ensures precise high-frequency alignment, so every note comes through with clarity and
VAST 2.0™
The Vertical Attach Surround Technique delivers a 25% increase in cone area, resulting in maximum output and
Showing the main technologies for this product.
Specs
Specifications
23
| Speaker Type | Coaxial |
| Midrange Size (Nominal Diameter) | 6.0" |
| Tweeter Size (Nominal Diameter) | 3/4” (19 mm) Inverted Dome |
| Piezo Size (Nominal Diameter) | 3/8” (9 mm) Co-Witnessed Convex |
| Nominal Impedance (Ohms) | 4Ω |
| Frequency Response (Hz) | 53Hz - 25kHz |
| Voice Coil Diameter (in/mm) | 1" (25.4 mm) |
| Power Handling (Watts RMS) | 75 Watts RMS 150 Watts Peak |
| Crossover | Tweeter High-Pass: 9kHz @ 6 dB/Octave |
| Fs (Hz) | 70 Hz |
| Sensitivity (dB @ 1W/1M) | 88 dB |
| Sensitivity (2.83V/1M) | 91 dB |
| Cutout Diameter | 5" (127 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | — |
| Front-Loading Depth (Twist-Lock Adaptor) | — |
| Mounting Depth (With Motor Cover) | 2.38" (60.4 mm) |
| Min. Mounting Depth (No Motor Cover) | 2.14" (54.3 mm) |
| Front Side Clearance | 0.49" (12.4 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Included in the Box | (2) 6.0” 4Ω 3-Way Coaxial Speakers (1) 6.0” Speaker Cutout Template (8) Self-Tapping Phillips #8x32mm (Speaker) (2) 18 AWG Red/Black Speaker Wire, 205 mm (3) 18 AWG (–) Female Crimp Spade Conn. (.187”) (3) 18 AWG (+) Female Crimp Spade Conn. (.250”) (4) 18 AWG Crimp Butt Connectors |
| Mounting Hardware | Yes |
| Shipping Weight | 5 Lbs. (2.27 Kg.) |
What's in the box
| Qty | Part number | Item details |
|---|---|---|
| 2 | — | 6.0” 4Ω 3-Way Coaxial Speakers |
| 1 | — | 6.0” Speaker Cutout Template |
| 8 | — | Self-Tapping Phillips #8x32mm (Speaker) |
| 2 | — | 18 AWG Red/Black Speaker Wire, 205 mm |
| 3 | — | 18 AWG (–) Female Crimp Spade Conn. (.187”) |
| 3 | — | 18 AWG (+) Female Crimp Spade Conn. (.250”) |
| 4 | — | 18 AWG Crimp Butt Connectors |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Similar products
