During these past few years the Mille line car audio woofers have been the choice of many enthusiasts looking for extreme performance; with ML 1650.3 Legend the Hertz designers increased again the limits of achievable performance for components designed for door installation .
Buyer confidence
88%Highlights
- Neodymium magnet optimized with FEA simulations for real dynamics and utmost control.
- Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.
- Aluminium covered pole for a linear impedance modulation and low distortion.
- 36 mm CCAW double layer voice coil wound on a Polyamide former for exceptional power handling and compression-free re production even in the most demanding musical passages.
Key specs
Full specs- Component
- Woofer
- Size mm (in.)
- 165 (6.5)
- Power Handling - Continuous W
- 125
- Power Handling - Peak W
- 250
- Impedance Ohm
- 4
- Voice Coil Ø
- 36 (1.4)
- Frequency Response Hz
- 40 - 6.5k
- Magnet size D x d x h mm (in.)
- 80 x 45 x 5 (3.15 x 1.77 x 0.2)
Key specs
Full specs- Component
- Woofer
- Size mm (in.)
- 165 (6.5)
- Power Handling - Continuous W
- 125
- Power Handling - Peak W
- 250
Highlights
Overview- Neodymium magnet optimized with FEA simulations for real dynamics and utmost control.
- Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.
- Aluminium covered pole for a linear impedance modulation and low distortion.
Overview
Key features
- Neodymium magnet optimized with FEA simulations for real dynamics and utmost control.
- Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.
- Aluminium covered pole for a linear impedance modulation and low distortion.
- 36 mm CCAW double layer voice coil wound on a Polyamide former for exceptional power handling and compression-free re production even in the most demanding musical passages.
- Exponential V-cone® with optimized geometry for utmost linearity and dispersion at mid frequency range.
- “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.
- Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.
- Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.
- CNC machined elegant diamond-cut basket edge featuring the Hertz logo.
- Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.
- V-CONE®
- Boundary Free Surround
Technologies

V-CONE®
The exponential profile gets very close to the perfect one, providing exceptional dispersion.

Boundary Free Surround
This technology provides the ability to achieve wider emission surface of the cone compared to speakers with same
Specs
Technical Specs
| Component | Woofer |
| Size mm (in.) | 165 (6.5) |
| Power Handling - Continuous W | 125 |
| Power Handling - Peak W | 250 |
| Impedance Ohm | 4 |
| Voice Coil Ø | 36 (1.4) |
| Frequency Response Hz | 40 - 6.5k |
| Magnet size D x d x h mm (in.) | 80 x 45 x 5 (3.15 x 1.77 x 0.2) |
| Weight of one speaker kg (lb.) | 1,29 (2.84) |
| Magnet | Neodymium |
| Cone | Pressed-pulp cone with cotton fibres |
| Xmech mm (in.) | ±9 (0.35) |
Electro-acoustic Specs
| D mm | 132 |
| Re Ohm | 3,3 |
| Fs Hz | 65 |
| Le mH | 0,24 |
| Vas I | 8,3 |
| Mms g | 17,5 |
| Cms mm/N | 0,3 |
| BL T*m | 7 |
| Qts | 0,52 |
| Qes | 0,52 |
| Qms | 5,3 |
| Spl dB | 93 |
Physical Specs

| A | 165 mm | 6.5 in. |
| B | 141 mm | 5.55 in. |
| C | 80 mm | 3.15 in. |
| D | 69 mm | 2.71 in. |
| E | 170 mm | 6.7 in. |
| F | 26 mm | 1.02 in. |
Frequency response

Visual spec reference.
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Awards / Press
Award 1
Un tuffo nella leggenda 1970-01-01
Accessories

Grille
Similar products








