1 / 7
Hertz
Hertz Cento CK 165 LSystem Consists Of The C 165 L Woofer
The Cento line expands with the C165 L woofer, featuring the use of non-pressed paper for the cone membrane , a choice that gives this component a natural sound, with solid and controlled low frequencies .
Highlights
- C 26:
- Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances.
- Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range.
- Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations.
Key specs
Full specs- Component
- System
- Size mm (in.)
- 165 (6.5)
- Power Handling - Continuous W
- 100
- Power Handling - Peak W
- 300
- Impedance Ohm
- 4
- Tweeter diaphragm mm (in.)
- 26 (1)
- Woofer Voice Coil Ø mm (in.)
- 25 (1)
- Tweeter Voice Coil Ø mm (in.)
- 20 (0.8)
Key specs
Full specs- Component
- System
- Size mm (in.)
- 165 (6.5)
- Power Handling - Continuous W
- 100
- Power Handling - Peak W
- 300
Highlights
Overview- C 26:
- Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances.
- Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range.
Overview
The Cento line expands with the C165 L woofer, featuring the use of non-pressed paper for the cone membrane, a choice that gives this component a natural sound, with solid and controlled low frequencies. The enhancement of the magnetic group together with the specific wide stroke voice coil allow the excursion of the woofer to be maximized maintaining utmost control even in the most demanding musical passages. The CK 165 L system consists of the C 165 L woofer, the C26 tweeter and the crossovers dedicated to the CCX 2W woofer and CCX 2T tweeter, made with selected components. The ultra-compact dimensions of the crossovers and the wire connections provide the specialist with a broader freedom during the installation. The tweeter filter is 12 dB/oct. with two levels of attenuation while for the woofer, thanks to its regular frequency roll-off, a 6 dB/oct. made with a pure copper high diameter coil is used to the advantage of reduced electrical losses and therefore of low frequencies efficiency. The engaging low frequencies and impressive power handling make the CK 165 L the perfect system for fans looking for strong emotions in the car cabin.
Highlights
Key features
- C 26:
- Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances.
- Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range.
- Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations.
- Wide range of accessories, for easy integration in OEM placements.
- C 165 L:
- Non-Pressed Paper Cone (NPP) for natural sound and low, powerful damped frequencies.
- High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels.
- 25 mm (1 in.) voice coil sized for high excursion and wound on aluminium former to guarantee high power handling.
- Compact and transparent three-spoke basket, acoustically combined with a rubber magnet cover for total damping of spurious vibrations.
- Elegant high resistance ABS plastic grille with a metallic finish combined with a protective metal mesh.
- CCX 2T – CCX 2W:
Technologies

NPP
NPP (NON-PRESSED PAPER) gives a natural sound, with solid and controlled low frequencies.
Specs
Technical Specs
15
| Component | System |
| Size mm (in.) | 165 (6.5) |
| Power Handling - Continuous W | 100 |
| Power Handling - Peak W | 300 |
| Impedance Ohm | 4 |
| Tweeter diaphragm mm (in.) | 26 (1) |
| Woofer Voice Coil Ø mm (in.) | 25 (1) |
| Tweeter Voice Coil Ø mm (in.) | 20 (0.8) |
| Sensitivity dB SPL | Tweeter 92 - Woofer 91 |
| Frequency Response Hz | 50 ÷ 22,5k |
| Crossover Cut off | LP 6 dB / Oct. / 3,8 KHz - HP 12 dB / Oct. / 3,8 KHz |
| Crossover Type | 2 Way Passive Crossover |
| Weight of one component - Woofer | 0,973 (2.15) |
| Weight of one component - Tweeter kg (lb) | 0,037 (0.08) |
| Weight of one component - Crossover kg (lb) | 0,037 (0.08) |
Electro-acoustic Specs
12
| D mm | 131,5 |
| Re Ohm | 3,2 |
| Fs Hz | 60 |
| Le mH | 0,23 |
| Vas I | 13,66 |
| Mms g | 14,2 |
| Cms mm/N | 0,52 |
| BL T*m | 4,9 |
| Qts | 0,60 |
| Qes | 0,70 |
| Qms | 3,8 |
| Spl dB | 91 |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Downloads
Accessories

CPG 165 GRILE
Similar products








