Variants
Reviewers consistently praise the P3D2‑12 for rugged construction, long life, and very deep, punchy bass — it shines when matched with the right amp and a properly tuned enclosure.
Buyer confidence
90%Highlights
- 1 Year Warranty
- Anodized aluminum cone and dustcap
- Diamond cut cast aluminum trim ring with optional grille
- StampCast basket with integrated spider venting
Key specs
Full specs- Power Handling (Watts RMS)
- 600 Watts RMS 1200 Watts Max
- Speaker Connector
- Dual 10 AWG compression
- Magnet Weight (oz)
- 96 oz. (2.73 kg.)
- Shipping Weight
- 20.9 Lbs. (9.48 kg)
- Size
- 12"
- Nominal Impedance
- Dual 2-Ohm
- Mounting Depth
- 6.66 in. (169.3 mm)
- Voice Coil Diameter
- 2.5" (65.5 mm)
Key specs
Full specs- Power Handling (Watts RMS)
- 600 Watts RMS 1200 Watts Max
- Speaker Connector
- Dual 10 AWG compression
- Magnet Weight (oz)
- 96 oz. (2.73 kg.)
- Shipping Weight
- 20.9 Lbs. (9.48 kg)
Highlights
Overview- 1 Year Warranty
- Anodized aluminum cone and dustcap
- Diamond cut cast aluminum trim ring with optional grille
Review highlights
Based on customer reviewsPunchy, well-built 12" sub with deep, chest‑shaking bass
Reviewers consistently praise the P3D2‑12 for rugged construction, long life, and very deep, punchy bass — it shines when matched with the right amp and a properly tuned enclosure.
What buyers praise
- Very punchy, deep low end — chest‑shaking output reported
- Solid, rugged build and long-term durability
What to watch for
- Needs a capable amplifier to reach its potential; several users upgraded amps to avoid underpowering
Overview
The P3D2-12 Punch 12" P3 is a high-output Rockford Fosgate subwoofer designed for cars and trucks. It features dual 2-ohm voice coils, 600 Watts RMS power handling, and a cast aluminum trim ring that accommodates a grille insert.
Best for
- Car and truck audio enthusiasts seeking a 12" subwoofer with strong power handling
- flexible wiring options
- and technologies aimed at increased cone area and cooler motor operation.
Key points
- 12" driver with Dual 2-Ohm voice coils (DVC) for wiring flexibility
- 600 Watts RMS power handling
- Anodized aluminum cone and dustcap
- VAST surround increases effective cone surface area (up to 25%)
- Unique spider venting to help keep the motor cooler
- FlexFit basket and hybrid stamp-cast basket for strength and reduced resonance
Fit and use
Designed for car and truck installations. The FlexFit basket accommodates a range of vehicle openings, and the dual 2-ohm voice coils provide multiple wiring/impedance options. The trim ring accepts a grille insert when a covered look is desired.
What to know
Power handling is rated at 600 Watts RMS. Dual 2-ohm coils mean you can choose wiring configurations to suit your amplifier and system impedance. VAST technology expands cone area for more output, and spider venting helps manage motor temperature. Review amplifier and enclosure compatibility to ensure the best perform…
Key features
- 1 Year Warranty
- Anodized aluminum cone and dustcap
- Diamond cut cast aluminum trim ring with optional grille
- StampCast basket with integrated spider venting
- Custom 10-AWG nickel plated push terminals
- Protective PVC textured magnet cover
- Extended pole piece and bumped vented backplate
- Dual linear spider with embedded 16 AWG tinsel leads
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Klippel Verified
- Stitched Tinsel Leads
- CEA-2031
More info
Manufacturer details
Additional details
The P3D2-12 is Rockford Fosgate's best performing Punch series subwoofer for cars and trucks. The P3 12 inch subwoofers now feature anodized aluminum cones and dustcaps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme car and truck installations. Best of all, a new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance.
Looking for more options? Check out all of our subwoofers.
Technologies

Klippel Verified
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and

CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has

VAST Surround - Subs
Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective

FlexFit Basket - Subwoofer
The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized
Anodized Aluminum Voice Coil Former
Two things generally happen when voice coils heat-up. They can generate heat close to the melt-down temp of their
Specs
Specifications
| Power Handling (Watts RMS) | 600 Watts RMS 1200 Watts Max |
| Speaker Connector | Dual 10 AWG compression |
| Magnet Weight (oz) | 96 oz. (2.73 kg.) |
| Shipping Weight | 20.9 Lbs. (9.48 kg) |
| Size | 12" |
| Nominal Impedance | Dual 2-Ohm |
| Mounting Depth | 6.66 in. (169.3 mm) |
| Voice Coil Diameter | 2.5" (65.5 mm) |
| Woofer Displacement | 0.106 cu. ft. (3.0 Liters) |
| Re (Ohms) | 3.20 |
| SPL (dB @ 1w/1m) | 85 |
| Fs (Hz) | 26.5 |
| Qts | 0.49 |
| Le (mH) | 4.25 |
| Qes | 0.53 |
| Qms | 6.70 |
| Cutout Diameter | 11.25 in. (285 mm) |
| Vas (Liters) | 57.7 |
| Xmax (mm) | 15.2 |
| Sd (cm2) | 570 |
| Subwoofer Type | Standard |
| Voice Coil Type | Dual Voice Coil |
| Sealed Box Volume (Vb) | 1.02 cu. ft. (28.8 Liters) |
| Vented Box Volume (Vb) | 1.79 cu. ft. (50.6 Liters) |
Reviews (0)
—
No average rating yet
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Installation resources
Wiring diagrams
Box Advisor

Sealed Enclosure
- Recommended volume
- 1.02 cu ft
- Volume range
- 0.75 cu ft to 1.25 cu ft
- Dimensions
- 18 in W x 14 in H x 10 in D
- F3
- 43.4 Hz
- Qtc
- 0.8
- Port / ID
- 65 in
- Subwoofer size
- 67 in
- Impedance
- 3 ohm
- Power handling (RMS)
- 600 W

Vented Enclosure
- Recommended volume
- 1.79 cu ft
- Volume range
- 1.5 cu ft to 2 cu ft
- Dimensions
- 25 in W x 14 in H x 12 in D
- F3
- 33.2 Hz
- Tuning (Fb)
- 40 Hz
- Port / ID
- 67 in
- Subwoofer size
- 67 in
- Impedance
- 3 ohm
- Power handling (RMS)
- 600 W
Support
Return Authorization
If you bought this product from Onkar Electronics, use the Contact Us page on the Onkar Electronics website and we will help with return authorization and warranty support. If you purchased it from another dealer, contact that authorized dealer first for return assistance.
Popular Questions
No FAQs available
Similar products





















