Speakers

100W RMS

MOJO Pro component speakers have a whole new look with massive performance gains. These speakers feature ultra-efficient and powerful neodymium magnets which cuts down on size and weight. A new and improved stylish cast basket adds strength. One massive upgrade is the addition of water resistance making the new MOJO Pro an amazing solution for many outdoor applications including motorcycle fairings and side-by-sides where you require massive sound without fear of damage from the elements.

Was $339.95

To improve the car audio tweeters which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound. From these presuppositions the Hertz ML 280.3 Legend car audio speakers has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion. This optimization method led to a reviewed face plate geometry for improved frequency response and lower distortion. Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency.

Was $659.99

125W RMS

MOJO Pro component speakers have a whole new look with massive performance gains. These speakers feature ultra-efficient and powerful neodymium magnets which cuts down on size and weight. A new and improved stylish cast basket adds strength. One massive upgrade is the addition of water resistance making the new MOJO Pro an amazing solution for many outdoor applications including motorcycle fairings and side-by-sides where you require massive sound without fear of damage from the elements.

Was $249.95

175W RMS

Street Reference Pro speakers were designed specifically to handle maximum power and perform at extreme volume. SR Pro coaxial speakers were designed to bring the insane performance of SR Pro speakers to a coaxial set up. These 8″ speakers feature an oversized 3″ horn tweeter with a 1″ diaphragm for maximum high frequency output. The updated RGB LED horn tweeter is a new eye-catching addition to the Street Reference Pro coaxial speakers allowing you to create a stunning display with even more impressive audio. The woofer features a 1.5″ voice coil for increased power handling allowing these 8″ coaxials to absolutely scream.

Was $209.95

55W RMS • 4 Ohm

The human auditory system processes the range of medium frequencies with maximum sensitivity and selectivity because it makes the voice intelligible from the rest of the audio spectrum.The R & amp;D team started from this simple principle to design from scratch the TH 3.0 II VOCE, dedicated to this fundamental range of frequencies, with the simple as well as ambitious target of extreme linearity, in order not to add or hide anything of the signal reproduced, enhancing in this way every nuance.ULTRA HIGH CONTROLThe extremely powerful custom N38 H-grade Neodymium magnet ensures unmatched control of the mobile group and the aluminium ring nullifies the intermodulation distortion otherwise generated at peak excursions.EXTREME LINEARITYThrough finite element simulation (FEM) the Audison R & amp;D team has optimized the break-up point between cone/surround, obtaining an ultra-linear frequency response in the mid-range.The generous 30 mm CCAR (Copper Clad Aluminum Ribbon) voice coil wound with flat wire gives the TH 3.0 II Voce an extraordinary excursion and minimizes at the same time the cone non-linearity.TPX® CONETH 3 II Voce membrane is made of TPX®, a transparent material that ensures frequency response linearity leaving the speaker interior in full view.

30W RMS • 4 Ohm

XED525C - 5.25” 2-Way Component Speaker Set Description: Defy all odds and overcome budget limitations with the best in class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS provides tremendous value and sound that will be music to your ears.

Mille Series • 4 Ohm

MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.

Was $319.99

The MP 165P.3 car audio woofers electro-acoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height , has a nominal 3 Ω impedance in addition to an increased power handling . These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion , ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.

Was $789.99

The MLK 165.3 Legend car audio speakers system is composed of the ML 28.3 Legend tweeter and the ML 165.3 Legend woofer with the MLCX 165.3 dedicated crossover. The woofer originates from the ML 1650.3 Legend, inheriting all its technologies such as the Boundary Free Surround, the V-cone profile Pressed-pulp cone with cotton fibres, the six spoke aluminium basket with vented holes; however, it has been designed employing a high density ferrite magnet assembly, characterising its emission in the mid frequency range.  The ML 28.3 Legend tweeter mounts the same Neodymium magnet assembly as the ML 280.3 Legend’s and features all the optimizations made with FEA methods on the dome profile, and that it shares with its “older brother”, except for the most esoteric features such as the die-cast aluminium faceplate, the CNC machined body made from solid aluminium block and the copper short circuit ring.  Like MLCX 2 TW.3, also the MLCX 165.3 crossover features the “Hi-Contour” control to adjust the ML 28.3 tweeter cut-off frequency and so the cross-point with the ML 165.3 woofer, according to the position of the two speakers in the car. Through the tweeter three position level control, with 2 dB step attenuation, the level for a correct timbre balance can be fine-tuned according to one’s own tastes.

Was $1219.99

Power Series • 4 Ohm

The T152 is a 5.25” 2-way full-range speaker rated at 60 Watts RMS designed as a high-powered OEM replacement. Speakers include grilles with adapter plates, integrated concealed crossovers and mounting hardware. Sold in pairs (2 each)

Was $259.99

Punch Series • 350W RMS • 4 Ohm

The Pro PPS4-10 is an 10” 4-Ohm woofer engineered specifically for high SPL (Sound Pressure Level) conditions. It features 350 watt RMS power handing and includes grilles with mounting hardware. Sold individually (1 each).

Was $469.99

100W RMS • 4 Ohm

AP 690 is ideal for car models with doors equipped to house elliptical speakers. The R & amp;D team optimized the electro-acoustic parameters for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation.The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier. The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients. The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.

Dieci Series

These grilles can be fully disassembled and are especially designed to be customized and used in one of two different combinations.

Was $49.99

40W RMS • 4 Ohm

The APBMW X coaxials have been designed for BMW-MINI models that do not allow the installation of a two-way system on the front of the upgrade of the rear system. The 100 mm (4 in.) APBMW X4M, with basket and fixing screws dedicated to the specific car model, features a water-repellent pressed-paper cone for natural and color-free mid-range frequencies. The 20 mm coil and Tetolon dome tweeter, a material boasting lightness and damping properties offer optimized dispersion features for OEM placement, elevating the sound stage to a realistic level.

The Boss Elite BE692C 6x9-Inch 2-Way Coaxial Speakers are built for speaker replacement and sound upgrades. Key details include Rubber Surround, Paper Cone, Stamped Steel Basket.

60W RMS • 4 Ohm

CVPX69 - CVPX Series 6"x9" 2-Way Full Range Speaker w/Horn Tweeter (Single) CVPX Series Coaxial Speakers – Power, Precision, and Unmatched Sound Get ready to experience unrivaled sound with the CVPX Series Coaxial Speakers from Cerwin-Vega. Engineered to deliver exceptional audio performance for car, marine, motorcycle, and powersports applications, the CVPX Series takes sound to new heights with horn-loaded drivers and a bullet tweeter designed to produce stunning clarity and jaw-dropping volume. Sound That Commands Attention The CVPX Series is Cerwin-Vega’s most powerful speaker lineup yet, expanding on our renowned Pro Driver technology. With 3 full-range horn-loaded drivers and a horn-loaded bullet tweeter, this series is all about delivering concert-quality sound—anytime, anywhere. Horn-Loaded Design: The horn-loaded architecture maximizes efficiency, ensuring that every watt of power translates into exceptional output. This design means you get more volume, better clarity, and unmatched performance from your speakers, without compromising on sound quality. High Power Handling: Capable of handling immense power, the CVPX Series is engineered to thrive under pressure. Whether you're cranking up the volume on the road, at sea, or off-road, these speakers won’t back down. Lightning-Fast Response: Paired with treated paper cones, the drivers provide an ultra-responsive, tonal balance that makes every beat, note, and vocal shine through with precision. Performance That Rocks These drivers were designed for performance, producing incredible output that will transform any environment into a dynamic concert space. When you need high volume that matches your energy, the CVPX Series is there to deliver: Powerful Sound Output: Whether you're on land or water, these speakers fill any space with astounding sound, providing a thrilling auditory experience that’s sure to impress. Quick & Accurate Response: With the treated paper cones and optimized design, these drivers deliver an exceptionally balanced sound across all music genres, from deep bass to crisp highs. Built for Durability and Performance Designed to endure the rigors of the road, water, and off-road environments, the CVPX Series boasts exceptional durability: Replacement Diaphragms Available: For those who push their speakers to the limit, replacement diaphragms for the tweeter are available, ensuring that your sound stays top-notch with infield serviceability. Available Sizes: Whether you need 8”, 6.5”, or 6x9” models, the CVPX Series fits perfectly in any setup, offering versatility and unmatched sound quality. Why Choose Cerwin-Vega CVPX Series Speakers? Horn-Loaded Efficiency: Get more from your power with a horn-loaded design that maximizes sound output. High Power Handling: Push your speakers to the limit without sacrificing sound quality. Dynamic Performance: From pounding bass to crystal-clear highs, the CVPX Series handles all music genres with ease. The CVPX Series Coaxial Speakers by Cerwin-Vega represent the pinnacle of car audio technology, designed for those who demand the ultimate sound experience. With their horn-loaded drivers, lightning-fast response, and high power handling, these speakers are built to deliver concert-quality sound that will leave you wanting more. Whether you're driving, riding, or cruising on the water, the CVPX Series guarantees an experience that will blow you away. Cerwin-Vega CVPX Series – Power, Clarity, and Volume in Every Note.

170W RMS • 4 Ohm

CVP8 - 8” PRO Series Full-Range Speaker 4Ω Description: PRO SERIES MIDRANGE SPEAKERS borrow from the heritage of CERWIN-VEGA’S PRO AUDIO legacy by reproducing insane SPL levels that will tingle all your senses. Create your own listening experience and concert environment with an assortment of high output PRO SERIES SPEAKERS and TWEETERS that CERWIN-VEGA MOBILE has to offer. (Speaker Sold Individually)

Cento Series • 70W RMS • 4 Ohm

Two-way systems Cento CK 130 features the new C 26 tweeter featuring a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil for a detailed and natural reproduction of medium-high frequencies. The R&D team worked extensively to optimize the C 26 dispersion characteristics to maximize performance on the listening point, with a natural and progressive roll-off and a natural timbre that favors frequency linearity. Much time was invested in the research of the perfect material for the C 130 woofer cones: through a long process of customization of the materials SPP-M was selected (Semi Pressed Paper-Mica), which preserves the natural sound of the semi-pressed paper and enhances it with Mica powder improving rigidity. The result is an excellent balance between lightness and damping, essential for a powerful and controlled emission. The oversized ferrite magnet provides excellent control even at higher excursions. The ultra compact CCX 2 crossover featuring tweeter emission level control (0, +3 dB) uses selected components for a full and engaging sound. The CG 100 grilles included in the Cento systems brighten up the car interior with their sophisticated design. Made of high resistance ABS with metal mesh, they offer a high degree of protection within a compact size, ideal for in-car installation.

Was $469.99

Mille Series • 200W RMS • 4 Ohm

ML 1800.3 Legend car audio woofers has been thought and designed for the enthusiasts attending contests who need a component merging the timbre accuracy of ML 1650.3 Legend to a wider extension to the low frequencies thanks to the large emission surface, higher power handling and control which only a 50 mm voice coil can ensure. To get to these results, the R&D staff performed extensive in-car voicing sessions, after building several prototypes with the FEA simulation method and testing them with a wide array of measurements carried out with the Klippel® suite. Like in the suspensions of competition cars, the surround must stand the most extreme working conditions to ensure maximum stability and symmetry at high excursions, and so to achieve impact and extension to the low frequency range. For this reason, the electro-acoustic designers developed a new surround-basket gluing system called “Boundary Free Surround”. This technology, provides the ability to achieve wider emission surface of the cone compared to speakers with same diameter; that way, the cone manages to move a bigger mass of air, so it produces more acoustic pressure.

Was $1359.99

SPL Show Series • 4 Ohm

NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 35 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 35A Neo provides tweeter only.

Was $629.99

50W RMS • 3.2 Ohm

The Audison VOCE II AV 3.0 II mid-range speaker is meticulously crafted to deliver exceptional clarity and rich detail in the crucial mid-frequency range. Featuring a specialized cone made from pressed paper with cotton fibers, the AV 3.0 II offers an ideal balance of rigidity and responsiveness, enhancing sound reproduction for today’s car audio enthusiasts. This mid-range unit integrates seamlessly into any system with its compact design and is equipped with OEM-style connectors, ensuring straightforward and versatile installation options.

125W RMS

Street Reference Pro speakers were designed specifically to handle maximum power and perform at extreme volume. SRP62C Pro audio component sets feature two 6.5″ mids and 2-4″ tweeters and 2 crossovers giving you everything you need for a pro audio system that will absolutely scream. The SR Pro 6.5″ mids feature an accordion cloth surround designed for maximum excursion to play at extreme volume while the and the SRXPT 4″ Pro tweeters are capable of handling 100w RMS which gives you enough highs to hang with any audio system. These ultra-loud pro audio components also feature RGB LED accent lighting for an awesome light display in any installation.

Was $469.95

50W RMS

Upgrade your audio experience with the new and improved Memphis Street Reference speakers. Offering remarkable performance and unbeatable value, these speakers are the perfect choice for anyone looking to upgrade their audio system without breaking the bank. The latest Street Reference coaxial speakers have received a boost in power handling compared to their predecessors. These speakers also feature a slimmer profile, allowing compatibility with an even wider range of factory locations. The introduction of a polypropylene cone and rubber surround not only adds a sleek new look but also contributes to a richer sound and an overall increase in power handling.

Was $149.95

80W RMS • 2 Ohm

VIV SixFive Series speakers are the product of over 50 years of audio engineering. These speakers represent a bold step into high end audio and are the cleanest sounding, most acoustically accurate speakers ever produced by Memphis. One listen and you will see what the hype is all about. VIV603CV2 component speaker sets include 2-6.5″ mids, 2 tweeters and crossovers. This impressive component set features a biampable crossover, an aluminum housed silk dome crossover and a unique precision tuned surround for an extra flat frequency response. The dual layer composite fiber cone featured in the mids is ultra-light and rigid allowing VIV speakers to produce powerful and accurate mid bass with distortion at high power.

Was $1139.95