Speakers

100W RMS

Street Reference Pro speakers were designed specifically to handle maximum power and perform at extreme volume. SRPPT 4″ pro audio tweeters are sold in pairs and are capable of handling 100w RMS and 200w Peak power which gives you enough highs to hang with any audio system.

Was $139.95

40W RMS • 4 Ohm

The R152-S is a 5.25” 2-way component system rated at 40 watts RMS for a new generation of factory replacement speakers. Kit includes two woofers with grilles, two tweeters with integrated crossovers and mounting hardware. Sold in pairs (2 each).

Was $159.99

150W RMS • 4 Ohm

Audison Thesis TH 6.5 II SAX is a masterpiece of acoustic engineering, designed to ensure extraordinary precision and transparency in sound reproduction. With a diameter of 165 mm, this midrange woofer has been developed to exceed the limits imposed by traditional designs, pushing sound performance to the highest levels without compromise. The heart of the TH 6.5 II SAX is the powerful H-grade neodymium magnet, which generates an extremely stable magnetic field and outstanding energy efficiency, essential for achieving exceptional sound dynamics. The design of the magnetic circuit, optimized through advanced simulation software, focuses the magnetic field to maximize transducer efficiency, offering a fast and accurate response even in delicate mid-range frequencies. Particular attention has been given to the suspension system, a critical element for controlling cone movement. The spider, made of a mix of highly elastic fibers, allows for a linear and distortion-free excursion even under intense use. Similarly, the natural rubber surround is optimized to enable wide cone excursions without mechanically compressing the sound, preserving fidelity to the original source. The 50 mm mobile coil, wound with flat wire in CCAR (Copper Clad Aluminum Ribbon), not only maximizes the force factor but also provides excellent heat dissipation, preventing overheating and ensuring stable performance over time. This technical detail contributes to the total absence of thermal compression, a crucial aspect for maintaining consistent audio quality, even during prolonged listening sessions. The aluminum alloy basket, designed to eliminate unwanted vibrations, further enhances sound clarity. Its structure, with a system of four pairs of spokes, not only offers great structural rigidity but also minimizes air resistance, avoiding aerodynamic compression phenomena that could affect midrange frequencies. In summary, the Audison Thesis TH 6.5 II SAX is much more than just a speaker: it is a concentrate of technological innovation and refined design, created to offer an unparalleled sound experience. Every component has been carefully studied to minimize any form of distortion and compression, ensuring a pure, detailed, and incredibly faithful sound reproduction.

70W RMS • 4 Ohm

APX 570 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter. The 5×7″ cones surround features an exclusive shallow Triple Wave profile, for maximum excursion linearity.

50W RMS

Engineered to produce amazing sound and sized to fit most factory locations, Power Reference coaxial speakers have been our flagship for decades. Excellent sound quality and easy integration make Power Reference a staple in the industry. Power Reference 4×10″ speakers are a perfect option for anyone looking for a quality audio upgrade to their system with warm impressive sound.

Was $269.95

35W RMS • 4 Ohm

XED650C - 6.5" XED Series 2-Way Component Set Description: Defy all odds and overcome budget limitations with the best in class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS provides tremendous value and sound that will be music to your ears.

SPL Show Series • 150W RMS • 4 Ohm

The SV 165.1 car audio midrange can be employed to build systems with tremendous impact. Like the SX subwoofers, the SV 165.1 features a solid, robust structure and, like all the other SPL Show components, it employs a copper voice coil wound on a two-layer KSV former, for unheard-of thermal and mechanical capability also in extreme circumstances. The cone features a water repellent pressed paper membrane and paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.

Was $369.99

75W RMS

MSeries speakers are celebrated for their rich, beautiful sound and exceptional clarity. Built with lightweight, highly responsive carbon fiber cones and integrated aluminum dome tweeters, they deliver crisp, accurate sound across the full frequency spectrum. For those seeking even more customization, the coaxially mounted tweeters can be easily removed and reconfigured into a component system with the MSCKIT (sold separately). The kit includes phase plugs and versatile tweeter mounts, allowing you to reposition the tweeters as either surface or flush mounts for enhanced imaging and optimal sound staging. This innovative design ensures MSeries speakers are not only highly customizable but also adaptable to virtually any installation, providing an unparalleled listening experience.

Was $409.95

175W RMS

Street Reference Pro speakers were designed specifically to handle maximum power and perform at extreme volume. SR Pro 8″ mids feature an accordion cloth surround designed for maximum excursion to play at extreme volume for an audio system that will absolutely scream. These ultra-loud pro audio mids also feature RGB LED accent lighting for an awesome light display in any installation. 8″ pro audio mids are sold individually and can be combined with SRXPT 4″ pro tweeters for a next level audio system that will turn heads anywhere you go.

Was $179.95

SPL Show Series • 250W RMS • 4 Ohm

The SV 250.1 car audio midrange is the most versatile solution for SPL dedicated installations. Like the SX subwoofers, the SV 250.1 features a solid, robust structure and, like all the other SPL Show components, it employs a copper voice coil wound on a two-layer KSV former, for unheard-of thermal and mechanical capability also in extreme circumstances. The cone features a water repellent pressed paper membrane and paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.

Was $319.99

Power Series • 75W RMS • 4 Ohm

The T2T-S is an audiophile 1” aluminum dome tweeter kit rated at 75 Watts RMS for fanatics preferring this type of tonal quality. The kit includes two tweeters with dedicated crossovers, trim rings, and mounting hardware. Sold in pairs (2 each)

Was $399.99

45W RMS • 4 Ohm

XED693 - 6"x9" 3-Way XED Series Coaxial Car Speaker Description: Defy all odds and overcome budget limitations with the best in class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS provides tremendous value and sound that will be music to your ears.

The MLK 700.3 Legend car audio speakers system aims at offering a mid-high frequency range of excellence, to combine with a Legend woofer with a choice between ML 1650.3 and ML 1800.3 actively filtered in a multi-amplified configuration. MLK 700.3 Legend is composed of the ML 700.3 Legend Extended Midrange, the ML 280.3 Legend tweeter and the MLCX 2 TM.3 dedicated crossover that features the unique Mid-Countour control with its three-position selector, acting on the mid frequencies of the ML 700.3 Legend midrange by varying the cross-point with the tweeter to obtain the desired sound.  The V-cone® exponential profile without the traditional dustcap gets close to the perfect one, generating exceptional dispersion: thanks to the synergistic action of these technological elements, ML700.3 Legend boasts outstanding high frequency extension making it possible to build purist two-way systems in combination with ML 1650.3 Legend or ML 1800.3 Legend.  Thanks to this configuration, where there is only one cross-point, phase rotations are limited to the minimum, ensuring excellent soundstage and disarming timbre consistency. With the mid-high frequencies being handled by the ML700.3 Legend and the low ones by the ML1800.3 Legend, the whole audio range is reproduced with transducers built with the same materials and based on the same electro-acoustic structure; that doesn’t happen with woofer and tweeter, since due to its own nature the tweeter is different in materials and structure. The uniformity in materials and structures creates very high timbre consistency, so the speakers can “disappear” and leave room to emotions.

Was $1649.99

15W RMS

Engineered to produce amazing sound and sized to fit most factory locations, Power Reference coaxial speakers have been our flagship for decades. Excellent sound quality and easy integration make Power Reference a staple in the industry. Power Reference 3.5″ point source tweeters features a low profile point source tweeter which allows this speaker to fit into even more factory locations without the tweeter interfering with factory grilles further enhancing the versatility of the Power Reference speaker lineup. speakers are a perfect option for anyone looking for a quality audio upgrade to their system with warm impressive sound.

Was $139.95

Uno Series • 55W RMS • 4 Ohm

The 6.5” two way coaxials are available X 165 features a special designed tweeter faceplate optimized for exceptional off-axis performance to ensure a linear frequency response when installed in a factory replacement setup. The pressed-paper cone treated with water-repellent along with the foam surround provide a very high SPL and extended low frequency response, to obtain a rich sound even when driven by the OEM head unit. The 25 mm(1ˈ) woofer voice coil driven by a high-flux density ferrite magnet offers a highly dynamic power handling for a powerful undistorted sound. The easy-to-install DIN size basket, protected by an abrasion-resistant dust paint, makes the factory speakers replacement a snap.

Was $89.99

RPMRGBLC - Cerwin Vega RGB Remote Lighting Controller

250W RMS

Street Reference Pro speakers were designed specifically to handle maximum power and perform at extreme volume. SR Pro 10″ mids feature an accordion cloth surround designed for maximum excursion to play at extreme volume for an audio system that will absolutely scream. These ultra-loud pro audio mids also feature RGB LED accent lighting for an awesome light display in any installation. These 10″ pro audio mids are sold individually and can be combined with SRXPT 4″ pro tweeters for a next level audio system that will turn heads anywhere you go. .

Was $289.95

GRL65X - 6.5 GRILL SPEAKER FOR XED The GRL65X 6.5-inch speaker grill is specifically designed to protect and enhance the performance of your XED series speakers, offering a durable and stylish shield. Constructed from strong materials, this grill keeps your speaker safe from physical damage, dust, and debris, while also contributing to the aesthetic look of your audio setup. Perfectly compatible with the XED series, this speaker grill is an essential accessory for any installation requiring speaker protection and style. General Features: Protects 6.5-inch XED speakers Durable construction for long-lasting use Stylish, functional design What's in the box: 1 x 6.5 Grill Speaker for XED Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

100W RMS

The T1675-S is a 6.75" 2-way component system featuring a 1" fabric dome tweeter for higher sound quality and Flex Fit basket for compatibility with various factory speaker mounting locations. The system includes a pair of tweeters, two woofers with grilles, dedicated crossovers, and mounting hardware. Sold in pairs (2 each)

Was $529.99

Power Series • 100W RMS • 4 Ohm

The T2652-S is a 6.50” 2-way component system featuring 1” aluminum dome tweeters and is rated at 100 Watts RMS. Kit includes pair or woofers with grilles, two tweeters with dedicated audiophile crossovers and mounting hardware. Sold in pairs (2 each)

Was $659.99

15W RMS

Engineered to produce amazing sound and sized to fit most factory locations, Power Reference coaxial speakers have been our flagship for decades. Excellent sound quality and easy integration make Power Reference a staple in the industry. Power Reference 2.75″ speakers are a perfect option for anyone looking for a quality audio upgrade to their system with warm impressive sound.

Was $109.95

6 Ohm

TH 1.5 II Violino is an extraordinary tweeter featuring a 34 mm CCAW single layer voice coil combining light weight, stability at lower frequencies and total absence of musical transients compression.The extremely powerful custom N38 H-grade Neodymium magnet provides 1.67 T*m in the magnetic gap for superb dynamic response and very low distortion in the whole frequency range.The exclusive air-loading system resulting in a resonance frequency below 800 Hz, for filter set-up starting as low as 1.5 kHz “ 12dB/Oct. The 38 mm natural silk dome has been optimized with extensive material characterization, laser vibrometer scanning and Finite Element Analysis methods for a smooth and extended response. The frequency response is extended up to 26 kHz and is optimized for off-axis installation.The tuning System featuring two types of electro-acoustic load: bottom case or bottom disk according to targets of highest performance as well as flexibility of in-car integration.TH 1.5 II violino features a full solid metal construction structure with each part exclusively designed and produced for the Audison TH 1.5 II.The FEM (Finite Element Method) optimized faceplate and front spokes improve the dispersion pattern. Audison eID technology provides TH 1.5 II traceability starting from the manufacturing stage up to the owner.

110W RMS • 4 Ohm

AP 6.5P woofer component has been designed to perform at its best in OEM placements, combining excellent power handling and efficiency featuring a very wide excursion to cope with the most important dynamic peaks without any compression. Its impressive magnetic assembly provides the energy needed for perfect control even during limit excursions. The CCAW (Copper Clad Aluminium Wire) voice coil (32 x 14 mm, 1.25 x 0.55 in) optimally manages the greater applied power. The basket was completely redesigned with the aid of simulations to lower the resistance of air flows, while maintaining compact sizes to facilitate the installation.

4 Ohm

Cerwin Vega HED 2025 Edition 5.25” 2-Way Component Full Range Speaker System - H525C Upgrade your car audio system with the Cerwin Vega HED 2025 Edition H525C, a 5.25” 2-way component full-range speaker system designed for audiophiles seeking precision sound and dynamic performance. Part of the HED Series, the H525C offers unmatched clarity, full-range coverage, and powerful bass, delivering an immersive listening experience that transforms your car into a concert venue. Whether you're listening to high-energy tracks or subtle acoustics, the H525C ensures your music sounds exactly as it was meant to be heard. Component System for High-Quality Sound The H525C features a 5.25” woofer and a 1” PEI tweeter, engineered to deliver smooth and balanced audio. The polypropylene cone offers precise bass and midrange reproduction, while the UV-treated foam surround enhances durability, ensuring your system remains in top condition for years. The dynamically balanced 1” PEI tweeter, powered by a neodymium magnet, produces bright, crisp high frequencies, ensuring every detail is clear and free of distortion. HED Series Features 5.25” Woofer & 1” PEI Tweeter – A high-performance 2-way component system that delivers full-range sound, with detailed bass, rich mids, and clear, vibrant highs. Responsive Polypropylene Cone – Ensures precise, accurate sound reproduction across all frequencies for a balanced listening experience. UV-Treated Foam Surround – Provides durability and enhances the longevity of the speaker, even under prolonged use. Dynamically Balanced 1” PEI Tweeter – Delivers sharp, clear high frequencies with exceptional clarity, powered by a neodymium magnet for maximum efficiency. Integrated Crossover with Tweeter Protection – Ensures smooth frequency transitions while protecting the tweeter from distortion, even at high volumes. Strontium Ferrite Woofer Magnet – Delivers deep, punchy bass and powerful low-end response for a rich, full sound. Powder-Coated, Rigid Stamped Steel Basket – Minimizes vibrations and distortion for clean, clear sound reproduction. Sold in Pairs – Perfect for creating a premium sound system that delivers dynamic audio clarity and precision in your vehicle. Designed for those who demand superior sound quality, the H525C brings Cerwin Vega’s signature engineering to your car audio setup. Whether you're upgrading an existing system or building a custom setup from scratch, the H525C will provide the high-end audio performance you’ve been looking for. Experience the HED Series and enjoy clear, powerful sound that makes every drive a listening experience.