1 / 3
Audison
APBX10S4SAPBX10S4S 250 mm Subwoofer
Ultra-low profile (5.6 in. / 142 mm) box with a sealed design perfectly tuned to fully exploit the APS 10 D driver.
Highlights
- Ultra-low profile (5.6 in. / 142 mm) box with a sealed design perfectly tuned to fully exploit the APS 10 D driver.
- 2 Sides/2 Sounds design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing installation to obtain more punch and definition.
- Leveling feet with Velcro inserts included for a secure grip on the carpet while maintaining easy removal.
- SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
Key specs
Full specs- Nominal diameter
- 250 mm
- Impedance
- 4 Ohm
- Power Handling - Peak
- 800 W
- Power Handling - Continuous
- 400 W
- Magnet Material
- HIGH DENSITY FLUX FERRITE
- Cone Material
- COTTON-FIBRE PRESSES PAPER CONE
- Dimension A
- 470 mm
- Dimension B
- 334 mm
Key specs
Full specs- Nominal diameter
- 250 mm
- Impedance
- 4 Ohm
- Power Handling - Peak
- 800 W
- Power Handling - Continuous
- 400 W
Highlights
Overview- Ultra-low profile (5.6 in. / 142 mm) box with a sealed design perfectly tuned to fully exploit the APS 10 D driver.
- 2 Sides/2 Sounds design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing installation to obtain more punch and definition.
- Leveling feet with Velcro inserts included for a secure grip on the carpet while maintaining easy removal.
Overview
- Ultra-low profile (5.6 in. / 142 mm) box with a sealed design perfectly tuned to fully exploit the APS 10 D driver.
- 2 Sides/2 Sounds design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing installation to obtain more punch and definition.
- Leveling feet with Velcro inserts included for a secure grip on the carpet while maintaining easy removal.
- SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
- Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
- Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way).
- Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
- Water-repellent treated paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
- Specifically developed to be combined with AF bit amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
- A sturdy metal grid is included for the total protection of the subwoofer driver.
- The APBX 10 S4S sealed enclosure is the ideal choice to be driven by the Audison AF M8.14 bit using two channels bridged. Designed to house the single 4 ohm voice coil APS 10 S4S subwoofer, it offers an ultra-performing Plug & Play solution boasting all the features that make the Prima boxes unique such as the SSP (Sub Smart Plug) terminal block for a quick connection leaving no room for errors.
Highlights
Key features
- Ultra-low profile (5.6 in. / 142 mm) box with a sealed design perfectly tuned to fully exploit the APS 10 D driver.
- 2 Sides/2 Sounds design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing installation to obtain more punch and definition.
- Leveling feet with Velcro inserts included for a secure grip on the carpet while maintaining easy removal.
- SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
- Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
- Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way).
- Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
- Water-repellent treated paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
- Specifically developed to be combined with AF bit amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
- A sturdy metal grid is included for the total protection of the subwoofer driver.
Specs
Technical Specs
6
| Nominal diameter | 250 mm |
| Impedance | 4 Ohm |
| Power Handling - Peak | 800 W |
| Power Handling - Continuous | 400 W |
| Magnet Material | HIGH DENSITY FLUX FERRITE |
| Cone Material | COTTON-FIBRE PRESSES PAPER CONE |
Dimensions
4
| Dimension A | 470 mm |
| Dimension B | 334 mm |
| Dimension C | 120 mm |
| Dimension D | 142 mm |
Reviews (0)
—
No average rating yet
0 reviews
No written reviews are live yet. Signed-in customers can submit one below.
No written reviews are live for this item yet.
Support
Downloads
Similar products








